Provision of EI Arrangements to the Construction of Specialty block in Government Hospital at Harur in Dharmapuri District

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) (Higher End) (DATA 1)

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End. (DATA 2)

Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with Module with 6A two way module switch with module front plate and making good of the concealed portion with painting of Suitable colour concealed PVC Stair case Light point Higher End (DATA 3)

Supply and fixing of 1No,6A two module 3 pin socket ,1No,6A one module switch with module cover plate (plastic ) on suitable module concealed box (GI) in flush with wall with connections (Higher end ) (SD-378)

Supply and fixing of 3nos.6A two module 3 pin socket , 3 nos. 6A one module switch with module cover plate plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-390)

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-402)

Supply and fixing of 2 no. 6A two module socket, 1no.6/16 A two module socket , 2 nos. 6A one module switch, 2 nos. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-432)

Supply and fixing of 20A Flush type Wall Socket 32A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug). (SD-144)

Supply and fixing of 9W LED Bulb for BH point. (DATA- 4)

Supply and fixing of 4Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting. (SD-443)

Supply and fixing of 24W LED 2x2 square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting (SD-448)

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with S clamps and with painting. (SD-457)

Supply and fixing of 1200mm (48") sweep BLDC ceiling fan high speed complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod on existing fan clamp (DATA - 5)

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall. (SD-114)

Supply and fixing of louvers shutters arrangements for 300mm (12") sweep (light duty) AC exhaust fan. (SD-120)

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame in flush with wall with earth connection only. Higher End (SD-523) (LDB - 9Nos,CDB-2 Nos and lift room)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End. (SD-535) (CDB - 2 Nos)

Supply and fixing of 7 segment 4 way TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 4 ways in each segment) and seperate provision for MCB / Isolators ( totally 12 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following in flush with wall with earth connection only. (SD-636) (For Lighting - 3 and power -5) 1. 63A 4P MCB -1 NO 2. 63A 4P 30 mA RCCB/ELCB - 1 No 3. 63 A DP MCB Isolator - 3 Nos 4. 6A to 32A SP MCB - 12 Nos

Supply and fixing of 4 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 no. 125A FP MCCB as incoming and 4 nos. 63A TP MCB, as outgoing with suitable cable end box in flush with wall with earth connection only. Higher End (DATA-6)

Supply and fixing of 3phase 200A aerial fuse unit for 3Nos. 500 A fuse units (200V) on suitable MS sheet covered with 6mm thick hylem sheet on suitable angle iron work the tapping pole with necessary clamps (DATA-7)

Supply, Fabrication, Erection, Testing and commissioning of indoor dust and vermin proof four compartment CT Metering panel made up of 16SWG CRCA sheet of size 48" x 48" x 18" with necessary stiffner and provided with following arrangements. 1. Front open door for each compartment provided with sealed locking arrangement. 2. 6mm thick hylam sheet in metering compartment for fixing 3phase 415V 4wire 50Hz Digital Energy meter provided by TANGEDCO. 3. 3Nos 1.5" x 1/4" and 1" x 1/4" Copper bus bar on suitable bus support with 3Nos 400/5A CTs in bus bar compartment. 4. 3Nos 400A HRC fuse unit & 1no 400A neutral link on 6mm thick hylam sheet in fuse comparment. 5. Fixing of control fuses and wiring with flexible PVC copper wire and LED Indicator arrangements. 6. 2Nos copper earth bus of 1" x 1/8" in the rear side. 7. Suitable MS base channel for mounting. 8. Viewing glass in the door for meter compartment. 9. Provision of cable entry and outgoing compartment. 10. Painting the panel with 2 coats of epoxy paint over one coat of red oxide. (DATA-8)

Renewal by Supply and Erection of 400A capacity dust and vermin proof cubical panel board made up of 16 SWG CRCA sheet steel enclosure with supply and fixing of the following interior mounting fuse switch with HRC fuses arrangement in two rows with a central bus bar chamber and two cable chambers at the top and bottom conforming to IE rules 400 A TPN SDF switch disconnector fuse units in sheet steel Enclosure with HRC Fuse Double Break Switch -1 No as incoming 250A TPN SDF switch disconnector fuse units in sheet steel Enclosure with HRC Fuse Double Break Switch - 3Nos 125A TPN SDF switch disconnector fuse units in sheet steel Enclosure with HRC Fuse Double Break Switch - 6 Nos 63A TPN SDF switch disconnector fuse units in sheet steel Enclosure with HRC Fuse Double Break Switch - 6 Nos The bus bar chamber will consist of suitable size of tinned copper flat for phase and neutral buses on epoxy moulded bus insulated at proper and sufficient spacing between the buses as per IE Rules. This bus bar chamber should be segregated from the adjacent chamber by providing hylem sheet of suitable thickness as partition, 3Nos 50x6mm tinned copper flats should be provided all round the panel for earth bus. The fuse Switches should be connected with the phase and natural buses with suitable size of rigid copper flat/rod and Each switch should be connected with 2 Nos earth bus with 2 runs of No.14 SWG rigid Tinned copper rod with suitable lugs. Phase and neutral tinned buses should be tinned properly.

The panel should have a separate digital metering chamber at the top side consisting of voltage, current, PF, hormonics and CT arrangement, Pilot lamps, toggle switches, fuse units. The panel should be provided with two coats of Powder Coated paint of approved colour over one coat of zinc oxide primer, approved by the site officer and also the danger board. Superscription of incoming and outgoing feeding cable details, capacity of switches etc., with white paint and 2 nos metallic danger board to be affixed, providing Rubber Beading for All Doors The bus bar chamber should have 3 Nos of 75mm x 10mm tinned copper flat for 3 phases and 1 No 2" x 1/4" tinned copper flat for Neutral. The outgoing switches should be connected to the bus with the following copper flats. 1) 315A & 250A switch with 50mm x 6mm tinned copper flat. The capacity of the switches size of incoming and out going cable the place to which the supply is feed shall be mounted on switch chamber. The pannel board should be mounted on 75mm x37mm MS channel provided all round at bottom of the panel. The whole arrangement should be erected on a masonry pedestal to be constructed with suitable foundation bolts and nuts such that the lowest switch handle is at a height of 0.75 m from the ground level with necessary earth connection. (DATA) (All the TPN Switch should be of Higher End with ISI)

Supply and fixing of 400A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with earth connection only. (SD-652) ( For Mains)

Supply and fixing of 250A TPN sheet double break switch with HRC fuse and neutral on suitable angle iron frame work with earth connection only. (SD-648) ( For Fire Pump)

Supply and fixing of 63A TPN MC switch on suitable angle iron frame work with MS cable entry box with earth connection only. (SD-150) (For X-RAY, LIFT,MANIFOLD, PUMP)

Supply and fixing of 32A TPN MC switch on suitable angle iron frame work with MS cable entry box with earth connection only. (SD-148 ) (For USG SCAN )

Supply and fixing of 32A FP MCB in Metal box FP enclosure flush with wall and making good of the concealed portion with earth connection. (DATA-9) (For USG Scan)

Supply and fixing of 63A FP MCB in Metal box FP enclosure flush with wall and making good of the concealed portion with earth connection. (DATA-10) (For XRAY,Manifold)

Supply and run of 2 of 1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earthwire connection of 1.5sq.mm copper wire and making good of the concealed portion with suitable colour. (DATA -11) (For 6A, UPS Lighting)

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion (DATA - 12) (For Computer Plug)

Supply and Run of 2 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. copper wire and making good of the concealed portion. (DATA - 13 ) (For 16A, 20A, Set Plugs & LDB's)

Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 6 sq.mm. copper wire and making good of the concealed portion. (DATA - 14 ) (For 12W SPN MCB)

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed portion (DATA - 15 )

Supply and run of 4 of 16 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 16 sq.mm copper wire and making good of the concealed portion with suitable colour. (DATA- 16) (For MCCB DB's,X-RAY TPN,SCAN TPN,DUCT AC FP)

Supply and laying of 3½ x25 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD-182) (For Lift and Pump)

Supply and clamping of 3½ x25 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (SD-205) (lift)

Supply and fixing of brass cable gland for 3½ x 25 sqmm PVC armoured LTUG cable with earth connection. (SD-164)(for manifold)

Supply and providing cable end termination of 3½ x25 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete (SD-223)

Supply and laying of 3½ x35 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD-183) (For Manifold)

Supply and clamping of 3½ x 35 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (SD-206)

Supply and fixing of brass cable gland for 3½ x 35 sqmm PVC armoured LTUG cable with earth connection. (SD-165)

Supply and providing cable end termination of 3½ x 35 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete (SD-224)

Supply and laying of 3½ x 95 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD-186) (For Generator )

Supply and clamping of 3½ x 95 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (SD-209) (For Generator)

Supply and fixing of brass cable gland for 3½ x 95 sq.mm PVC armoured LTUG cable, with earth connection. (SD-168)

Supply and providing cable end termination of 3½ x 95 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. (SD-227)

Supply and laying of 3½ x 240 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. (SD-190) (For EB, Panel)

Supply and clamping of 3½ x 240 sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps. (SD-213)

Supply and fixing of brass cable gland for 3½ x 240 sq.mm PVC armoured LTUG cable, with earth connection. (SD-172)

Supply and providing cable end termination of 3½ x 240 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete. (SD-230)

Supply and fixing of 63A FP MCB with 63A 30mA FP ELCB in 8 module weather proof enclosure in flush with wall and making good of the concealed portion with earth connection. (Higher end) (DATA-17) (For Lift and Duct A.c)

Supply, Erection, testing and Commissioning of 2TR (6000K cal / hr) ABS plastic split type Air conditioner confirming to IS 1391 [part 2] 1992 with Rotary compressor operating on refrigerant R-32/Non CFL suitable for wall mounting for operation on 230V, 50 HZ single phase AC Renewal by supply with THREE Star rating as per BEE Specification and capable of performing the following functions. (A) Cooling (B) Dehumidifying (C) Air Circulating. (D)Filtering. The installation work for the above split type AC units includes the following. 1. Mounting / fixing indoor and outdoor units at their respective locations. 2. Laying refrigerent pipe line of 6mtrs. distance, both units after drilling hole / holes in the wall if required. Thickness of the copper tubing shall not be less than 0.7mm. 3. Installing the suction pipe with expanded polythene foam 5mm thick tubing. 4. Laying 15mm dia flexible PVC drain pipe of 6mts. Length to throw out the condensate water being formed in the indoor unit.

5. Leakage testing the entire gas unit. 6. Charging refrigerant gas in the unit. 7. Suitable electric wiring to be provided with 2.5 sqmm PVC insulated copper wire between indoor and outdoor units up to 4mtr. length and up to switch within the 3 mtrs. of location of indoor unit. (Make - Carrier / Voltas / Blue Star make only) (SR)

Supply and Erection of 5KVA Voltage stabilzer for 2 TR split type AC unit high / low voltage cut off time delay relay with input voltage cut off time range of 170V - 270V and out put range of 200 - 240V with 3 minutes time delay relay (V.GUARD make VGS 500/ Syscom/Equalient) (SR)

Supply and laying of 5/8" and 3/8" copper pipe (Extra beyond 3 metres supplied with AC unit). (SR)

Supply and fixing of MS stand for fixing outdoor unit. (SR)

Supply and fixing of 40A A DP MCB in Metal box DP enclosure flush with wall and making good of the concealed portion with earth connection. (DATA-I) (For 5 KVA )

Supply, erection, testing and commissioning of Uninterrupted power supply (UPS) (Sine wave) (Make Microtech/ Alpha/ Amron /Exide/Luminous) unit of capacity 5 KVA with input voltage 60V DC supply, output voltage 230V -50Hz AC supply with following accessories / Circuits and with 2 hr of battery backup of full load respectively. 1.Battery Charging Device 2.Inverter Circuit 3.Overload as well as short circuit 4.Indication for all operation like battery charging over load, low battery etc. 5.Reset switch 6. Exide Inva Tubular Battery 5No. of 12V AC IT 500 150AH (Make Microtech/ Amron/ Exide/ Luminous) 7.One layer wooden / steel fabricated stand. (SR) (Lightning )

Supply ,installation , testing and commissioning of 5.5TR factory assembled double skin AHU with 100mm -45kg/cum PUF Insulated detachable panels ,extruded thermal break aluminium profiles filled with PUF,panel external skin with 0.6 mm preplasticized sheet, panel internal skin with 0.6mm galvanized sheet, AMCA tested DIDW backward/ forward curved centrifugal fan.with EFF1 rating motor, drive arrangement with taper lock pulleys for fan and motor, vibration isolators out of heavy duty rubberized mounts, prefilters with 3ply HDPE 50mm thick filters having an efficiency of 90% 10 Micron and 5 Micron, 6row /12FPI deep DX copper cooling coil with copper header and aluminium fins, GI mist arrestor, condensate coil trough with SS-304-20G insulated with 9mm closed cell elastomeric foam,

guard for inspection door, out let damper of aerofoil blades & PVC gears, and flexible fire retardant canvas complete with galvanized hardware. Each of the cooling coils will have independent distributers, electronic expansion valve kit, catch all drier, independent DX coil circuit to connectivity to each ODU circuit. Appropriate devices to be installed to monitor the Temperature, Humidity and Diff. Pressure inside the Operation Theatre. (Carrier/ Voltas/ Bluestar make/ Equ.) (SR)

Supply and fixing of Laminar Air flow Plenum for SS304 - 1.0 mm Thick casing, Mini Pleat Hepa Filters for 100mm Thick- Flange type, OT Pendant Light provision for 600X600, With SS304-1.2mm Thick perforated sheet. PLENUM SIZE: 1800L X 2400W X 350H High Efficiency particulate Air (HEPA) filter specification: Filter Size : 8 feet x 6 feet x 1 feet Classification : H-13 Construction :Panel Type Efficiency :99.97% Optical efficiency at .3 micron Cleanliness level: Class 100 As per NABH Standard Spacers: Aluminium Initial pressure drop:25 mm W.C Final pressure drop : 75 mm W.C Duct holding capacity:4750gm/Sq.mtr Framing :Aluminium (Box type) Washable : No Test reports to be furnished from approved Government External Quality Assurance Lab/ Agency to meet the testing parameters after commissioning of the AC system with HEPA filter as per NABH standards. (SR)

Supply & fixing of hard drawn copper Refrigerant piping of suction line of Size 7/8” inches with necessary fitting and clamp etc. (SR XIV part N 3 M -2003)

Supply & fixing of hard drawn copper Refrigerant piping of liquid line of size 5/8” inches with necessary fitting and clamp etc. ( SR XIV part N -1- M-1990)

Supply and fixing of flexible canvas connection between indoor unit and ducting and rubber pads, with ceiling Support angle rods etc... (SR XIV part N -3- M-2004)

Supply and fixing of 50mm thick anti vibrating rubber pads (SR XIV part N -3- M-2005)

Supply, Fabrication and Installation of 22 G Sheet Aluminium Ducting for both suction and Return arrangement insulate with for Operation Theatres with inter linking arrangements with necessary angle supports, anchor fasteners and threaded rods etc... as required. (SR)

Supply and Providing Thermal Insulation of 9mm thick vidoflex with aluminium foil. (SR )

Supply and fixing of powder coated Extruded aluminium powder coated supply and return air grilles/diffuser with volume control damper. (SR )

Supply, fabrication and fixing of duct mouth dampers. (SR )

Supply and fixing of 1 inch PVC water drain pipe line on wall with suitable Clamp as required. (SR )

Supply, fabrication and fixing of suitable MS angle support frame for mounting the out door Units. (SR)

Supply, fabrication and fixing of suitable MS angle support frame for mounting the in door Units. (SR )

Supply and providing of pipeline nitrile rubber insulation for Refrigerant and drain pipeline. (SR )

Supply and providing accoustic for initial portion of ducting with 12mm thick fibre glassrigid board covered with tissue paper and Aluminium perforted sheet. (SR)

Supply and fixing of microvee filter 600x600mm size fine microvee mesh filter with efficiency of 5 micron level for return air. [MR]

Supply, fabrication and fixing of Fresh air Louver made of extruded aluminium with bird screen provided with intake louvers. [MR]

Supply and run of 25mm x 3 mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection. (SD-76)

Supply and Run of 1 of No.8 SWG copper wire for earth connection. (SD-371)

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD-221)

Supply and fixing of 8way SPNMCB distribution board made out of sheet steel/aluminum rail complete with bus bar arrangements incorporating the following controls with double door arrangements [IP 42 Metal door of Legrand] in flush with wall & making good of the concealed portion with earth connection. (1) 32A DPMCB as Incoming: 1No. (2) 6A to 32 A SPMCB as outgoing: 6 Nos. ( MCB DB, MCB should be Higher End )] (LIFT Head Room) (SD-523)

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch concealed in suitable MS box in flush with wall. (Lift Head Room-1 AND LIFT WELL -5) (SD-137)

Supply and Run of 3 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire with painting of suitable colour. (DATA-19)

Supply and fixing of 16A Two-way switch in suitable Modular flush type GI box on wall with suitable front cover plate with earth connection. (Higher End) (For Lift well lighting Control) (DATA-20)

Supply and fixing of WT bulk head fitting with guard suitable for 9W LED lamp. (SD- 84)

Please Enable Macros to View BoQ information