Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.0 LAccepted-AOC | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹44.2 L+₹4.4 L (11.0%)Rejected-Finance NEAR RAILWAY STATION UTARLAI BARMER RAJASTHAN PIN 344001 | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance HIGHEST |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
11 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY BARMER
Military Engineer Services, Jalipa Military Station, Garrison Engineer (Army), Barmer, PIN 344001
SPL REPAIR TO BLDG NOS P 44 P 114 AT JALIPA MIL STN AND CHEQUERED PATHWAY NEAR P 96 AT JASAI MIL STN UNDER GE A RMY BARMER
2023_MES_573992_1
8687/E7
Open Tender
Civil Works
Item Rate
180 days
GE ARMY BARMER
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE ARMY BARMER
₹90,000
17 Apr 2023
9 Jan 2023
18 Feb 2023
9 Jan 2023
11 Feb 2023
23 Jan 2023
Amount
Demolition brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all qoins, arches, pillar etc but excluding ashlar facings dressed stone and pre cast concrete articles complete all as specified and directed.
Taking down old membrane and including preparing surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc all as specified and directed.
Demolition for plain cement concrete roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.
Demolition of cement concrete(unreinforced) of any description and in any position including removing the debries & rubbish to a distance n.exc 100 mtr directed complete all as specified and directed.
Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.
Demolition old RCC for deterioration condition (other than ground floors),chajjas and similar suspended work chjja and cantilever portion complete all as specified and directed.
M&L 25mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate for levelling course etc complete all as specified and directed.
M&L plastering 10mm thick in CM (1:3) on concrete surfaces (old or new) of roof, RCC surfaces of wall, raft, floor with mixing of liquid waterproofing compound as per manufacturer instructions complete all as specified and directed . (Note: liquid water proofing compund shall be measured and paid separately) .
Supply only liquid water proofing compound complete all as specified and directed.
Supply and fixing Geotextile 120gm non wovan 100% polyster of thickness 1 to 1.25mm as per manufactrers recommendations and instruction
M&L applying evenly priming @ 0.4 Kg/Sqm with bituminous primer as per manufacture instrctions complete all as specified and directed.
Applying evenly a tack coat of industrial bitumen S-35 grade 30/40 at the rate of 1.2 kg per sq.m including cleaning surfaces
M&L for laying of APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt not less than 150gm/sqm) laid over surface by torched application complete over a coat of geotextile 120gm non woven 100% polyster as per item No10 etc all as per manufacturer instructions complete all as specified and directed.
M & L Endura SRI cool roof tiles of 300x300x10 mm thick in white colour non skid, laid on roof slab over and including 15 mm thick screed bed in cm 1:4, joints grouted and pointed in CM(1:3). The top 4-5mm thickness of the tiles in between the joints shall be filled with epoxy grout of approved make as per manufacturers instruction to make water tight complete all as specified and directed.
Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified and directed.
Taking down cement or cement lime plaster on brick or stone walls etc. including racking out joints hacking for key scrubbing down with water etc. complete all as specified and directed .
M&L for 15 mm thick rendering in cement mortar (1:4) on fair faces of brick work/pcc blocks/stone masonry surfaces mixed with water proofing compound as per manufacturer instructions & finished the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick on fair faces of brickwork or concrete surfaces of ceiling in CM(1:3) finished even and smooth without using extra cement complete all as specified and directed.
M&L for two coats of cement base paints on new plastered surfaces of wall over a coat of alkali resistant priming paint including preparation of new surfaces etc complete all as specified and directed.
M&L two coat of white wash on new plastered surfaces of ceilling including preparation of surfaces etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store or disposing off the site after offering credit complete all as specified and directed.
M&L for stone concrete block and slab wall work cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.
S&F 15mm bore GI tubing medium grade with all fittings laid in floors wall and trenches including taking down existing GI tubes with fittings complete all as specified and directed.
Refixing old steel 15mm bore GI tubing medium grade with all fittings laid in floors wall and trenches including taking down existing GI tubes with fittings complete all as specified and directed.
S&F 20mm bore GI tubing medium grade with all fittings laid in floors wall and trenches including taking down existing GI tubes with fittings complete all as specified and directed.
Refixing old steel 20mm bore GI tubing medium grade with all fittings laid in floors wall and trenches including taking down existing GI tubes with fittings complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks 500 litre capacity three layered any colour as approved (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I inluding taking down existing PVC water tanks any type and capacity all as specified including taking down old PVC water tank complete all as specified and directed.
S&F of 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod &high density plastic ball screwed for iron pipe and fixed complete all as specified and directed.
M&L type C2 1:3:6 (40mm graded aggregate) cement concrete in foundations, filling and mass concrete for sub base complete all as specified and directed.
M&L for Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, type C-1 1:3:6 (20mm graded stone aggregate) set in 1:6 CM complete all as specified and directed.
M&L for except pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, set in 1:6 CM complete all as specified and directed.
M&L prepainted Galvalume aluminium zinc coating GI based corrugated/ Mangolore pattern roof steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws including dismantling plain, corrugated steel sheeing, any gauge, thickness including nanital or similar pattern in roof covering same complete all as specified and directed.
Excavating in post holes or similar holes each n exc 0.50 cu.m, getting out any in type of soil by chiselling, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm complete all as specified and directed.
Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S&F steel work in tubular trusses including special shaped washers etc complete using ERW or induction butt welded tubes confirming to IS:1161-1979 Grade St-240 including drilling for the size connection complete all as specified and directed.
S&F Rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates Gde Fe410-0 or Fe 310-0 complete all as specified and directed.
S&F rolled mild steel work confirming to Fe 410-W, Grade-E- 250, Quality-A as in plates [plain & chequered], channels, angles, square cut or notched [ordinary or counter sunk] forming holes without any attachment complete all as specified and directed.
M&L PCC 1:2:4 type B2 by using 40mm graded stone aggregate as in foundations filling and mass concrete for levelling corse complete all as specified and directed.
M &L for preparation of new surfaces of steel of any description and in any position over 10 CM width or girth; not otherwise described, and applying two coat of synthetic enamel paint and one coat red oxide, complete including necessary scaffolding arrangement as required at site complete all as specified and directed
S&F light shade Vitrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified and directed.
S&F Dark shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed in CM(1:6) complete all as specified and directed
S & F 10.5 mm thick rectified digital floor tiles of size exc. 0.06 sqm but not exc 0.09 sqm any square/rectangular shape and size conforming to relevant IS with coloured cement and pigment, laid over and incl 15 thick screed bed in CM 1:6 complete all as specified and directed. Make : Johnson or equivalent make
S&F 18/19 mm thick MDF Board prelaminated decorative face both side fixed with screws to timber frame work etc including prelaminated exterior grade both side laminated complete all as specified and directed and as dirrected .
S&F in repairs stainless decorative type auto hinges etc complete all as specified and directed .
S&F in repairs stainless decorative type handle 150mm long complete all as specified and directed .
S& F in repair magnet for cup board etc complete all as specified and directed and dirrected.
S&F in repairs stainless decorative type handle 100mm long complete all as specified and directed .
Taking down chowkhats or frames not exc. 1.5 sq. m each but with shutters (without taking off shutters from the frames) complete all as specified and directed.
Taking down chowkhats or frames exc. 1.5 sq. and n exc 4.0 sqm each but with shutters (without taking off shutters from the frames) complete all as specified and directed.
M&L anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.
S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.
S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as per requirement and direction.
S&F 4.80mm sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F 4.80mm sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S&Fixed in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:6) complete all as specified and directed.
M&L preparation new plastered surface and applying two coat of distemper oil emulsion over a coat of 3mm thick wall care putty on wall complete all as specified and directed.
M&L Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Demolition of cement concrete (Reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. (Note : Demoltion and removal of RCC/PCC will be carried out carefully without damaging undamaged portion of RCC wall & RCC Raft/Footing or any other RCC member of structure, if due to above causes/reasons any type of leakage seepage found in UG sump the same shall be repair by the contractor on his own cost properly as per department requirement please.)
M&L for cement concrete (1:4:8) type D2 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed.
M&L for RCC design mix M-30 (20 mm graded aggregates) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&L for RCC design mix M-30 (20 mm graded aggregates) in vertical wall complete all as specified and directed.
M&L for RCC design mix M-30 (20 mm graded aggregates) in Roof beam complete all as specified and directed.
M&L for RCC design mix M-30 (20 mm graded aggregates) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed.
M&L for RCC design mix M-30 (20 mm graded aggregates) in columns, pillars, piers, posts and struts complete all as specified and directed.
S&F 1.00mm thick plain, galvanised, mild steel sheeting cut 20cm wide and fixed in RCC/concrete as water bar complete all as specified and directed.
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with rough finished surface complete all as specified and directed.
Formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc.; vertical or to better with fair finished surfaces complete all as specified and directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; exceeding 200m thick (Horizontal or sloping) flat rough finished surfaces of concrete complete all as specified and directed.
Formwork to edges of Rough finished surfaces concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed.
Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and directed.
M&L for TMT steel bars (Fe 500D, CRS) 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for TMT steel bars (Fe 500D, CRS) 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for TMT steel bars (Fe 500D, CRS) 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
M&L for 12mm thick rendering in CM (1:3) on RCC surfaces of wall and slab top, finished even and smooth without using extra cement using water proofing compound complete all as specified and directed. (Note : Water proofing compound shall be measured and paid separately)
M&L for Epoxy Bonding Agent suitable for bonding new to old concrete, bricks and steel components, bricks, tiles etc after the prepration of old concrete/RCC surface by cleaning and removing of dust, dirt, loose particles, laitance etc by wire brushing, scrapping and washing with water complete all as per manufacturer's instructions. (Make: Dr. Fixit or Equivalent)
M&L for Hardcore of broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete all as specified and directed.
S&F for Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc 5 kg each complete all as specified and directed.
S&F for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 (Brackets over 10kg each to be measured under `Structural Steel') complete all as specified and directed.
S&F for 100mm bore cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors/RCC slab jointing and pointing in CM (1:1), spun pipes complete all as specified and directed.
S&F for 100 mm bore cast iron cowls complete all as specified and directed.
De-watering of water including desludging of sluldge/mud at bottom including taking out other dirty & filthy materials from UG sump/ RCC tanks by pump or manually using buckets/baskets, lifting the same upto any depth of tank and removed outside from MD land complete all as specified and directed .
M&L for cleaning the rust and cement mortar or cement concrete mortar from old steel bars embeded in concrete/RCC of any dia in the all directions of RCC member by sand paper, wire brush or power tools, swipe down the surface with paint brush/ cloth again and applying Dr. Fixit Rust Remover liquid on the complete surfaces of steel/TMT bars after 2 Hrs use wire brush to scrap the rust particles properly and apply EPOX-100 as prime coat to all surfaces of old TMT bars and after 6 Hrs apply EPOX-118 Resins and hardner at the mixing ratio of 1:0.50 by volume as per manufacturer's instructions, including 0.15m rebaring of new steel if required of any dia and any Nos complete all as specified and directed. (Note : Inside area Length and Height (LXH) one side only for RCC member shall be measured and paid.)
M&L for prepration of New/old plastered or unplastered surfaces of walls, floor/slab by cleaning to remove loose particles, dust, latance etc., Filling of holes/Cracks with filler material, applying Two coats of “Aromatic Polyurethane Food Grade water proofing membrane coating” of make/Brand STP or Shali Urethane FG for 1500 micron thickness over a coat of primer by roller complete all directed and as per manufacturers instructions. Note : Water proof testing in all respect shall be carried out soon after completion for water tightness. Testing shall be done as per IS-3370 Part-I to IV. The work shall be treated as complete only after tests are carried out satisfactorily and certificate to this effect is issued by GE. Water required for testing shall be supplied by the deptt at the work site, the cost of pipe, machinery and other equipments for filling the sump shall be borne by the contractor without any extra cost to the Govt. Make : M/s STP Ltd./Asian Paint/Berger/ Pidilite Industries Ltd/ Choksey. Note : Cracks filler, Priming Coat and Damp Proofing coat used shall be of same Make/ Manufacturer.
M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.
M&L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
Demolition of stone slabs and tiles laid, bedded and pointed in any mortar of any description or thickness in floors, aprons etc complete all as specified and as as directed.
M&L for polka dots glazed floor paver tiles matte finish 300mmx300mmx10mm thick with grey cement and pigment, over and including 15mm thick screed in CM (1:4), set jointed & pointed in neat cement slurry in floors complete all as specified and directed.
Demolition and breaking up 150mm bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed.
S&F for 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors concrete complete all as specified and directed.
Taking down carefully the existing unserviceable batten/conduit/concealed type aluminium point wiring for light, fan, socket 5 Amps and15 Amps complete removing the same including fittings/fixtures and making good the disturbed surfaces of walls, floors, ceiling etc complete all as specified and directed.
Taking down unserviceable main switch/DB, Teak wood boards etc complete all as specified and directed.
Taking down fan, cealing/exhaust cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.
Taking down submain wiring of any size complete all as specified and directed.
M&L for point wiring surface type with single core 1.5 Sqmm PVC insulated unsheathed single core multistranded copper conductor cable (FRLS)including 1.5 Sqmm PVC insulated unsheathed copper conductor as earth continuity conductor drawn in and including ISI marked PVC casing caping not less than 20mm width with its accessories, including necessary pressed steel terminal boxes and 3 mm thick ISI marked laminated sheet cover and SS screws with cup washers for fixing switches, sockets, fan regulators etc. including making good disturbed surfaces if any with cement mortar 1:3 for fixing switches/sockets/regulators etc. for one light point controlled by one switch complete all as specified and directed..
All as per Srl item No 83 above but for one ceiling fan point controlled by one switch.
All as per Srl item No 83 above but for one exhaust fan/wall mounting fan point controlled by one switch.
All as per Srl item No 83 above but for one 3/2 Pin 5 Amp socket out let point on the independent board.
All as per Srl item No 83 above but for one socket outlet 3/2 pin, 5 Amp, point on the same board with other switches.
All as per Srl item No 83 above but with cable 2.5 sqmm including 2.5 sqmm cable as earth wire for 15/16 amp socket point.
All as per Srl item No 83 above but with cable 4 sqmm including 4 sqmm cable as earth wire for 15/16 amp socket point.
Supply and fix single pole and neutral enclosures with a two pin and earth plug and socket complete with one double pole MCB 10 A ,240 V complete all as specified and directed.
Supply and fix switch piano flush type single pole one way 5 Amps complete all as specified and directed.
Supply and fix socket outlet 2in1, 3pin,5A complete all as specified and directed.
Supply and fix socket outlet 2in1, 3pin,6/16 A complete all as specified and directed.
Supply and fix switch piano flush type single pole one way 15 Amps complete all as specified and directed.
Supply and fix ceiling rose surface bakelite 65x50 mm two to three terminals complete all as specified and directed.
Supply and fix step type electronic fan regulator flush type, 230 volt, AC complete all as specified and directed.
S&F MCB single pole, 240 volts 6 to 32 Amps, 'C' curve complete all as specified and directed.
S&F MCB single pole and neutral 06 to 32 Amps, 240 Volts, 'C' curve complete all as specified and directed.
S & F MCB TPN 40 to 63 Amps, 415 Volts 'C' curve complete all as specified and directed.
S&F sheet metal enclosure, (for DB's when MCBs to be used), flushed in wall single pole and neutral Double door, 8 way, 240 Volts with PVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB's and isolators etc complete all as specified and directed.
Supply and fixing load line distribution board TPN vertical, 4 way double door type with IP 54 protection, isolated neutral bar, cement spill protector door earthing fixed on wall semi flush with incoming control through MCCB 4 poles 125 Amps, 16 KA, blanking plates complete with all accessories all as specified and directed . (Make : Indoasian Cat Part No: 812040 or equivalent make of ABB, Schneider,Havells, C&S etc) Note: Outgoing MCBs shall be measured and paid separately
Supply and fix ceiling fan, white/ivory colour 1200 mm sweep, 3 wings suitable for operating on AC 220/230 volts single phase, 50 hz supply with down road complete, min air delivery 210 CFM with service value 6.00 BEE, five star rating, with brushless direct current motor (BLDC) including necessary PVC insulated flexible wire 3 core for connecting from ceiling rose to connector complete all as specified and directed. Make : Orient/Havells/Crompton
Supply and fix exhaust fan 300 mm sweep with louvre complete fixed to wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible copper conductor cable 24/0.2mm, Metal exhaust fan complete all as specified and directed.
M&L sub main wiring concealed type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 4 Sqmm, 1100 volts grade (FRLS) and one run of 4 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and directed. (Note :- Two runs of 4 Sqmm cable, one run of 4 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).
M&L sub main wiring concealed type with two runs of single core, PVC insulated, unsheathed multi standard copper conductor cable of size 6 Sqmm, 1100 volts grade (FRLS) and one run of 6 Sqmm PVC insulated multi stranded copper conductor for earth continuity conductor drawn through and including suitable size ISI marked rigid PVC conduit with all necessary accessories such as bends, tees, junction boxes, elbows complete all as specified and directed. (Note :- Two runs of 6 Sqmm cable, one run of 6 Sqmm continuity earth wire and one run of PVC conduit with all necessary accessories will be measured as one length).
S & F LED batten suitble for indoor application 20 W, 4' length ,with efficacy125 lumen/watt, wall mounted with extruded aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed . Make Crompton Bright Linea Cat Part No CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj, Wipro, Havells, Halonix etc.
Supply and fix in recess mounting low glare LED panellight 36 watt for armstrong/grid ceiling or similar ceiling mounting system with concealed complete prewired using 1.5 Sqmm FRLS PVC insulated (Unsheathed) 3 core copper conductor cable, 1100V grade complete all as specified and directed. Make: Crompton Aura-I CAT No CCR-127-36-57-SL-NWH or equivalent in Havells, Bajaj, Wipro, Halonix etc.
Supply and fix LED light fitting 1X9 W bulkhead luminaires with lamp holders etc complete with all aceessories including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed.
S & F in replacement LED 25 Watt street light fitting for bldg secutiry complete with light grade GI brackets, Nuts, bolts with omplete with all accessories internaly pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable for wall mounting as specified and directed. Make - Crompton cat No LSTS-25-CDL/NL-M or equivalent in Havells/ Philips/Bajaj/Wipro/ Halonix
S & F LED batten suitble for indoor application 10 W, 2' length , with efficacy 100 lumen/wattwall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed . Make: Crompton TRIMLINEA Cat No LCTLN-10-NW or equivallent in Bajaj, Wipro, Havells, Halonix etc.
M & L earthing complete with GI earth plate Electrode 60 cm x 60 cm x 6 mm thick burried directly in ground (earth plate not less than 2.25 Metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanished earth wire 4.0 mm dia by means of bolts, nuts check and washers of GI or steel all as shown in electrical plate No. 3 of SSR Pt -I connected to earthing test point all as specified or indicated including GI pipe 15 mm dia light grade for earth wire protection, necessary excavation, earth work in any type of soil, PCC chamber and RCC cover slab, connecting lead wire from test point to DB complete all as specified & directed
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .