Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.8 LAccepted-Finance 403 B AT TAKALE WADI POST PHANSOP TAL DIST RATNAGIRI | RATNAGIRI | MAHARASHTRA | ₹15.8 L | L1 | Accepted-Finance ACCEPTED |
| 2 | L2₹15.8 LAccepted-Finance | ₹15.8 L | L2 | Accepted-Finance ACCEPTED |
| 3 | L3₹15.9 LAccepted-Finance | ₹15.9 L | L3 | Accepted-Finance ACCEPTED |
Tender Value
₹16.3 L
EMD Value
₹25,000
Closing Date
31 Dec 2025, 5:00 pmClosed
Executive Engineer Works Department ZP Ratnagiri
Dr.Babasaheb Ambedkar Bhavan Ground Floor Executive Engineer Works Department Ratnagiri ZP Ratnagiri
Adornment to Hatkhamba PHC Tal Ratnagiri for the year 2025 26
2025_RATNA_1262768_3
RZP/WD-Ratnagiri/E-Ten OPEN-33/2025-26
Open Tender
Civil Works - Others
180 days
Ratnagiri
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,000
₹25,000
26 Mar 2026
24 Dec 2025
1 Jan 2026
24 Dec 2025
31 Dec 2025
24 Dec 2025
Item No.1:- Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc. SSR P/I 46.08
Item No.2:- Removing Cement plaster including disposing of the spoils as directed with all leads, lifts etc, complete. SSR P/I 46.23
Item No.3:- Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete SSR P/I 46.19
Item No.4:- Excavation forfoundation in H. M. B. including removing the excavated materialup to distance of 50 m beyond area and lift as specified, stacking and spreading as directed including dewatering unless provided elsewhere,preparing the bed for the foundation and necessary backfilling, ramming,watering complete. 21.10
Item No.5:--Excavation forfoundation in hard rock in foundation including removing the excavated materialup to distance of 50 m beyond area and lift as specified, stacking and spreading as directed including dewatering unless provided elsewhere,preparing the bed for the foundation and necessary backfilling, ramming,watering complete.21.21
Item No.6:-Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) R.A.1
Item No.7 :- Providing laterite stone masonry in cement mortar 1:6 in foundation and plinth including striking joints on the unexposed faces and watering complete. R.A.No.2
Item No.8 :- Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
Item No. 9 - Filling in plinth & floors with contractors murum 15 cm to 20 cm layers including watering & compaction complete.
A) With Excavated Material 21.36
Item No. 10 -Providing soling using 80mm size Lat metal in layer of 15cm each including filling voids with sand, ramming, watering etc. complete. SSR Item No 741/ 21.38 ( Labour Charges)
Item No.11 :- Providing laterite stone masonry in C.M. 1:6 in superstructure including racking out joints where plastering is to be done watering and scaffolding complete. R.A.6
Item No. 12 :- Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, compaction, finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete.(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) R.A.No 9
Item No.13:-Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.26.33
Item No .14 -Providing internal cement plaster 12mm thick in Single coat sin cement mortar 1:5 without neeru finish, to concrete ,brick surface, in all positions including scaffolding and curing etc. complete . R.A.No 13
Item No.15:- Providing internal cement plaster 20mm thick in Single coats in cement mortar 1:4 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc.complete. R.A.
Item No.16 :- Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete.
Item No.17:- Providing sills of required material 20mm to 25mm thick, on a bed of cement mortar 1:4 including cement float, filling joints with neat cement slurry, curing, moulding edges, polishing,cleaning complete. b) Granite SSR P/I 33.22
Item No. 18 :- :-Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete. SSR Item No 1001/33.24
Item No.19 :--Providing and laying ceramic tiles of having size 30 cm x 30 cmand confirming to corrosponding I.S for dado and skirting in required position with readymade addhesive mortor of approved quality on plaster of 1:2 cement mortor including joint filling with white /colour cement slurry clearing curing etc complete. SSR Item No 1001/33.25
Item No.20 :-Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 29 mm x 31 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge. 54.13
Item No.21:- Providing and constructing granite kitchen platform with fixing of stainless steel sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete. (Platform top size 5.00 m x 0.60 m and height is 0.75 m) SSR P/I 41.78
Item No.22:- Providing and fixing white glazed earthenware Wash Hand Basin of 63cm x 45cm size including Bib cock stop tap brass heavy 15mm, brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. SSR P/I 41.65
Item No.23:- Providing and fixing fly proof mesh shutter toventilator / window using CCTW members of size 45 x 22 mm for frame work and 35 x 22 mm for middle support and fixing fly proof mesh on it and covering TW battens of size 20 x 10 mm including priming and two coats of oil painting to the new wood and steel work and all labour charges including all fixture and fastenings etc. complete SSR P/I 39.74
Item No.24:- Providing structural steel work in trusses, other similar trussed purlins and members with all bracing, gusset plates etc. as per detailed designs and drawings or as directed including cutting,fabricating, hoisting, erecting fixing in position, Making riveted/ bolted/ welded connection and one coat of anticorrosive paint and over it 2 coats of oil painting approved quality and shade etc.complete.P/I-129/23.04
Item No.25 :- Providing structural steel work of rectangular hollow steelsection for steel trusses, other similar trussed items like purlinand members with all bracing, gusset plates etc. as perdetailed designs and drawings or as directed including cutting,fabricating, hoisting, erecting, fixing in position makingriveted/bolted/ welded connections and one coat ofanticorrosive paint and over it two coats of oil painting ofapproved quality and shade complete.Spec. No. : As directed by Engineer-in-charge.SSR Item No .818/23.11
Item No.26:- Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/Square Metre).SSR Item No .1167/38.34
Item No.27 -Providing and applying plastic emulsion paint of approved quality, colour and shade to old and new surface sin two coat sincluding scaffolding, preparing the surface .(excluding the primercoat)etc. Complete. A) primer P/I 35.21 - B )Emulsion Paint P/I/36.12 -
Item No 28: - Providing and applying two coats of water proof cement paint of approved manufacture and of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete a) Primer P/I 35.21- 36.00/Smt b) cement Paint P/I/35.13- 79./smt
Item No.29:-Providing and fixing European type white glazed earthenware coupled closet symphonic trap with symphonic low level white glazed 10 litres cistern with black backlite seat with all necessary pipe connection etc. complete. SSR Item No.42.34
Item NO .30 -Providing and fixing on walls/ceiling/floor various dia.CPVC pipe with necessary fittings remaking good the demolished portionetc.complete.Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc.complete.
A) 20 mm SSR Item No 1415/42.56
B)15 mm SSR Item No 1413/42.55
Item No .31-Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete SSR Item No. 1410 / 42.51
Item No.32 :-Providing and fixing heavy duty inter locking concrete Coloured paving blocks of 80 mm thickness of having a strength of 300 Kilogram/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete SSR P/I 33.52
Item No.34 - Providing sills of polished Black Kadappa stone 25 to 30 mm thick, on a bed of cement mortar 1:4 including neat cement float, filling joints with cement slurry, curing, polishing, rounding edges, cleaning complete.33.20
Item No 35:- Garden Soil -Supplying on site garden soil well sieved 90% to passed through I.S. Sieve of 10 mm Size free from stone Rubbish like Dried Grass roots other such material soil should be fresh from Quary.The Coolur of the soil genrally be Red .The soil will be measured by measuring box (farma)( item includes Royalty Charges Transporting loading Unloading etc) lead charges 20km is considered RA 10
Item No 36:- Supplying on site well decayed ,well dried well powdered,without clods and free from stones,dried grass other rubbish material .The colour of manure genarally black.The manure will be measured by measuring box .(farma)( item includes Royalty Charges Transporting loading Unloading etc) lead charges 20km is considered RA 11
Item No 37:-Preparing lawn(30 cm Depth) Excavating ground to required depth of 30 cm. Removing and conveying unwanted stuff to required distance as directed. Filling fresh garden soil/silt and manure in excavated area in 3:1 proportion to height of 30 cm. Mixing garden soil and manure thoroughly well. Levelling watering on previous night. Planting required variety of lawn grass as directed and maintainung team establish by watering weeding, clipping, rolling etc. complete. RA 12
Item No.38 :- Providing and fixing Name Borad Including Painting and Lettering etc Complete.
Item No.39:- Royalty Charges
Murum
Item No.40 :-Payment of testing charges if contractor produced authourised results
Metal
Cement
Lat Stone
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.02 MB
B1Hatkhamba.pdf
Tender Documents • 2.05 MB
BOQ_2176056.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid