PROVN OF WIRE MESH FOR MONKEY PROOFING AT CERTAIN BLDGS OF 510 ABW AND FLOOR TILING WALL TILING AT BLDG NO P 320 AT OFFRS MD ACCN UNDER AGE BR I AGE BR II OF GE NORTH MEERUT CANTT

Amount

S&F rolled steel sections FE-410-W (grade E-250) quality A as in main and cross beams, base plates, MS plates, side supports, hip, jack rafters, purlins, where connected to common rafters and running rails and guiding for sliding door, fixed with angle cleat or other connecting plate complete all as specified and directed.

S&F Fe-410- W(Gde- E-250) quality- A for framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering, support to valley gutters, wind ties for roof sheets, MS sheet for gates, framing for monkey proofing at any height incl fixing to surface by self tapping screws / grouting / fastening or any other means as decided by Engineer-in-Charge, welded mesh of pitch complete all as specified an directed.

M& L for providing plain cement concrete 1:2:4 type B-0 (20 mm graded aggregates) as in coping, gola at the sheets and side wall top of bldgs, kerbs, holdfasts and at any other locations complete all as specified and directed.

M&L for cutting holes in brick wall built in cement mortar exceeding, half brick wall but not exceeding One brick wall thick for inserting holdfast and making good to disturbed surfaces / portions in cement mortar 1:3 or cement concrete 1:2:4 type B-1 (20 mm graded aggregates) complete all as specified and directed.

M&L Brick work with fly ash bricks straight or curved on plan exceeding 6m mean radius, old size bricks, built in Cement Mortar (1:6) complete all as specified and directed.

Taking down cement plaster on brick walls & concrete surfaces & the like including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified and directed

M&L preparing of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new steel surface surfaces of any description not exceeding 10 cm in width or girth along with priming with red oxide zinc chrome and applying two coats of synthetic enamel paint complete all as specified and directed.

Rough excavation not exceeding 1.5 deep in soft/ loose soil and getting out complete all as specified and directed.

Excavation in trenches for foundation not exceeding 1.5 meter wide and not exceeding 1.5 meter depth and not exceeding 10 Sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material (soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

M&L PCC 1:4:8 type D-2, (using 40mm graded crushed stone aggregates) in foundation / filling mass concrete complete all as specified and directed.

M&L PCC 1:3:6 type C-2, (using 40mm graded crushed stone aggregates) in foundation / filling mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 Type B-1 (Nominal mix) (using 20 mm graded aggregate) foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 Type B-1 (Nominal mix) (using 20 mm graded aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 Type B-1 (Nominal mix) (using 20 mm graded aggregate) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for providing reinforced cement concrete 1:2:4 Type B-1 (Nominal mix) (using 20 mm graded aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L laying for hardcore of broken brick of burnt clay bricks (well graded) bricks of gauge n exc 63 mm , deposited spreaded , leveled in layers not exceeding 15 cm thick watered and rammed to a true surface complete all as specified and directed.

M & L for applying 15mm thick rendering unsing ready mix plaster bags on brick / concrete surfaces of external walls finished even and fiar, using water proofing compound @ 200ml per 50kg weight of cement as per manufacturer instructions, complete all as specified an directed. Note:- (i) Water proofing compound shall be measured and paid sepratly (ii) Contractor is required to deposit ready mix bags for 100% CA quantity to the Engr-in-Charge within 15 days of acceptance of contract.

M&L for laying 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in floor/plinth protection, cement concrete surfaces finished even & fair without using extra cement complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia quality conforming to Fe- 415, Fe 500 or Fe-550 as in steel reinforcement for concrete complete all as specified and directed. Note :- Weight of binding wire shall not be considered for measurement and payment purpose.

All as per Srl item No…... here-in-before but 5mm dia and over up to and including 10mm dia as in stirrups, spacers / binders.

M&L for providing Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing Formwork to sides of square, rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing Formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surfaces of concrete flat complete all as specified and directed.

M&L for providing form work for rough finished surface to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work not exceeding 200mm thick (horizontal or sloping) complete all as specified and directed.

M&L for providing form work for rough finished surface to edges of concrete flat, break in floor.cills,railings etc.& similar works, exceeding 10 but not exceeding 20cm wide complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed.

M&L for rendering in two layers (10mm + 5mm) having first layer of 10 mm thick in cement mortar 1:6 and second layer in 5 mm thick in cement mortar 1:4 using WPC @ 200ml per 50kg weight of cement or as per manufacturers instructions in second layer on brick work or concrete surfaces finished even and fair complete all as specified and directed. Note :- Water proofing compound will be measured and paid seperately under "supply only" item of this Schedule.

M&L rendering 5 mm thick on ceiling in cement mortar 1:3 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound (I.S.I marked on packing) complete all as specified and directed.

M&L Preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer on plastered surface of wall complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L three coats of white wash on newly plastered surface or unplastered surfaces of ceiling including preparation surface complete all as spd and directed.

M & L Non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set & jointed in neat cement slurry and pointed in white or coloured cement to match the shade / color of tile laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed".

S & F Glazed ceramic colored tiles in vertical surface 300x 450 x 7mm thick set and jointed in neat, pointed in white or colored cement to match, the color / shade of tile laid over and including 10mm thick bedding layers in cement mortar 1:4 and, complete all as specified and directed

Supplied and fixed GI water tubing 15 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

Supplied and fixed GI water tubing 20 mm bore medium grade with all fittings fixed to walls and ceiling or laid in floors including cutting screwing and waste etc complete all as specified and directed.

S&F 20 mm dia stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handle screwed down both ends for iron pipe or for brass ferrule fixed in repair complete all as specified and directed.

S&F Bib tap chromium plated, fancy type cast copper alloy of 15mm bore with crutch or butter fly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F inrepairs Angle valve brass chromium plated with CP cup 15 mm bore complete all as specified and directed.

S&F 15 mm CP brass pillar tap with capstan head screwed down high pressure with or without lettered "HOT" or "COLD" with long screwed for iron pipe complete all as specified and directed.

Supplied and fixed in repairs vitreous china WHB, white, flat back size 550x400mm including cutting for and pinning in ends of bracket or erecting stand with and including angle iron brackets, duly painted with two coats of synthetic enamel paint over one coat red oxide zinc chrome primer and providing cast copper alloy capastan head C.P brass pillar tap fency type 01 No 15mm bore, CP brass waste coupling 32mm dia, PVC waste pipe 32mm dia and PVC connection 450mm long high pressure with PTMT nut complete all as specified & directed.

S&F soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S& F PVC connection 15 mm size with PTMT nuts and 450 mm long complete all as specified and directed.

S&F PVC 10 Ltr capacity syphonic action, valve type flushing cistern low level of required colour including basket bend, PVC connection including taking down complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern), white with 'P' or 'S' trap (excluding flushing cistern and flush pipe) including connection to drain or out going pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed

Supplied and fixed 110mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint, laid in trenches/under floor complete all as specified and directed.

Supplied and fixed 75 mm bore UPVC(SWR) pipes single socketed in any length with rubber ring joint laid in trenches/under floor complete all as specified and directed.

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F PVC (SRW) vent cowl for 75 mm dia PVC pipe complete all as specified and directed.

Supplied, hoisted and fixed in position any colour rotational moulded polyethylene water storage tanks IS : 12701 - 1996 marked (cylindrical vertical with closed top) of 500 Ltrs capacity with and including 20mm bore dia Ball valve high pressure of PTMT with epoxy aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms) complete all as specified and directed.

S&F 75 PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC door frame of size 50x47 made out of 5mm printed PVC sheet , reinforced with ms square tube complete all as specified and directed.

S&F 30 mm factory made solid panel PVC door and cup board shutter consisting of frame made out of M.S tube for top and bottom rail, M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain close PVC sheet to be fitted in MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame and site as specification complete all as specified and directed.

S&F butt hinges of size 100mm ,medium weight cold rolled mild steel complete all as specified and directed

S&F aluminium anodized barrel tower bolt ,anodised ,length of bolt 150 mm complete all as specified and directed.

S&F Aluminium anodised Cast type handle of 150mm size complete all as specified and directed.

S&F steel ventilator with top hung shutter including hinges,. Steel peg stay and including treated with tar or coal tar black paint on steel surfaces in contact / embedded in concrete / masonary work complete all as specified and directed. (Note : Disturbed surface of wall shall be made to good to tune surface)

M&L for preparation new steel surfaces of any description, over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tack or galvanised wire staples complete all as specified and directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pan complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar 1:4 as in roof mixing with WPC mixing with water proofing compound @ 200ml per 50 kg of weight of cement or as per manufacturers instructions whilst the concrete still green complete all as specified and directed Note :- Water proofing compound will be measured and paid seperately under "supply only" item of this Schedule.

M&L for Preparing ,cleaning new concrete/plastered surface and applying evenly a tack coat @1.20 kg/sqm with 85/25 industrial bitumen over a coat of bitumen primer @ 0.30 liter/sqm and laid with 3mm thick APP modified polymeric water proofing membrance with non-woven polyester rainforced and applying a tack coat of 85/25 industrial bitumen @ 1.2 kg per sqm and finish the surface with aluminium paint at top @ 0.2 kg/sqm as per manufacturer's instructions. Weight of membrane shall not be less than 3.6 kg/sqm unrolled and bonded to substrate with side and end laps 75mm & 100mm as per manufacturer's instructions. complete all as specified and directed.

M&L for brick work with fly ash bricks , straight or covered on plan to any radios in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

S&F half stall pattern urinal pot, basin only including connection to flushing pipe and out going pipes including PVC waste pipe & e.p coupling complete all as specified and directed.

Supply and fixing in repairs vitreous china squatting pan, Orissa' pattern, size 580 x 440mm white, with integral foot rests with and including cast iron 'P' or 'S' trap and setting the trap and pan in and including PCC 1:4:8, type D-2 minimum 150mm thick all round and finished just below level of rim of pan to receive the floor finishing, making all connections complete all as specified and directed.

M&L for concrete bed to drain pipes 150 mm dia including packing under, and haunching against the sides of pipes after they are laid and tested completed all as specified and directed.

M&L for 150 mm dia sail-glazed stoneware drain pipes laid in trenches and jointed as specified complete all as specified and directed.

M&L for providing cement concrete 1:2:4 Type B 1 (using 20 mm graded crushed stone aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs hold fast water troughs, filling in pressed steel door frame and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete all as specified and directed.

M &L for Brickwork with fly ash bricks old size bricks straight or curved on plan exc 6m mean radius built in Cement mortar 1:4 complete all as specified and directed.

S&F steel work as in square tubular trusses (framed work) incl rafters, purlines, distance pieces, cleats, post for trusses, special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS including structural steel is painted one shop coat of zinc chromate primer paint (including preparation of surface) and complete all as specified and directed.

SA construction co.

mohanlal gupta

Arun Construction Co.

High Tech Metal India

veer enterprises