Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹8.6 CrAWARDED | ₹8.6 Cr | AWARDED |
Tender Value
₹9.2 Cr
EMD Value
₹11.7 L
Closing Date
26 Mar 2025, 10:45 pmClosed
Minor Irrigation Department
Rejuvenation of Honnalli, Dongri and Shiragunji Lift Irrigation Scheme in Ankola Taluka Uttara Kannada District
MI/2024-25/LI/WORK_INDENT2603
MI/2024-25/LI/WORK_INDENT2603
Open
Lift Irrigation Scheme
Two Tender Document System(Two Cover)
Minor Irrigation Division Haliyal
₹5,000
₹11.7 L
12 Mar 2025
12 Mar 2025
27 Mar 2025
25 Mar 2025
24 Mar 2025
Rejuvenation of Honnalli, Dongri and Shiragunji Lift Irrigation Scheme in Ankola Taluka Uttara Kannada District
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
Providing and placing sand bags consisting of empty cement bags filled with 35 to 40 kg locally available sand for forming ring bund including cost of all materials, labour, plugging joints with selec...
Dewatering Pump 15HP Diesel (Hire Charges, Fuel charges & Crew Charges= 8.00+234+119=315.90) complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on spec...
Providing & fixing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L ...
Distempering with dry distemper of approved brand and manufacture (two coats) of required shade on new work, over and including water thinnable priming coat to give an even shade after thoroughly broo...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in-situ vibrated M-15 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for plain concrete works including cost of all materials, machinery, labour, ...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) complete as per detailed specifications with all lead and lifts, loading & unloadi...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Providing Brick work with common burnt clay machine moulded perforated bricks of class designation 5.0 conforming to IS: 2222 in superstructure above plinth level in cement mortar 1:6 (1 cement : 6 co...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
Removing and hauling all kinds of soil / soft rock including boulders upto 0.6 m diameter slipped due to natural causes and disposing off the same in specified dump area or as directed by manual means...
Earth work in surface excavation for stripping, seating of bund, Road way, by manual means for lowering & leveling the ground for all works other than foundation & depth in all kinds of soil not excee...
Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for side lini...
Providing and laying insitu vibrated M-20 grade cement concrete using 20 mm down approved, clean, hard, graded aggregates for side lining of canal including cost of all materials, machinery, labour, c...
Providing and laying insitu vibrated M-20 grade cement concrete using 40 mm down approved, clean, hard, graded aggregates for bed lining of canal including cost of all materials, machinery, labour, cl...
Providing and laying insitu vibrated M-20 ( 28 days cube compressive strength not less than 20 N / sq mm ) grade cement concrete using 20 mm down size approved, clean, hard, graded aggregates as per r...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and fixing GI pressure relief pipe with one end closed by perforated GI plate and other end provided with alluminium lid hinged to pipe including cost of all materials, labour, drilling 8 mm...
Providing and forming 350x 350 x 400 mm deep filter drain consisting of 75 mm thick 10 mm down coarse aggregate layer around pressure relief pipe and 75 mm thick sand layer around coarse aggregate lay...
Providing and fixing tarfelt expansion joint filler board for cement concrete lining of canal including cost of all materials, labour and all other ancillary operations complete. 20 mm thick 150 mm de...
Providing and fixing 200 x 200 x 750 mm roughly dressed boundary / demarcation / chainage/ arrow stones including cost of all materials, labour, engraving marks, excavating pit, fixing in position, mu...
Providing and fixing 200 x 200 x 750 mm size pemanent bench mark stone in 900 x 900 x 1200 mm size block of CC 1 :3 : 6 proportion by volume using 40 mm down clean, hard, graded aggregates and providi...
Reinforced cement concrete M15grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printing etc ii) Ordinary kilometer stone (precast) complete as per ...
Earth work excavation by manual means for drains, canals, waste weir draft, approach channels, key trench, foundation of Buildings & Bridges and such similar works in all kinds of soils , as per drawi...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of sill beam, wheel tracks, seal seats, guide rails, breast wall liner ( upto one vent height plus 1 m above the ro...
Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift service gate consisting of skin plate, vertical and horizontal girders, wheels, stiffeners, lifting b...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading...
Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material i...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) raising main pipe of specif...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) rising main of specified di...
Supplying, fixing and commissioning C.I Scour valve (sluice valve) of approved make bodyand seat ring of bronze PN 1.0 conforming to IS: 14846 of specified diameter and to withstand specified pressure...
Providing and fixing of Single/ Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/ 5...
Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...
Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. ...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specifications, inc...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, in...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing White washing with lime to give an even shade :New work (three coats) with lime of approved quality, including cost of materials, labour complete as per detailed specifications with all lead...
Providing 20 mm cement plaster of mix :1:4 (1 cement: 4 fine sand) to brick/stone masonary including rounding off corners wherever required smooth rendering, providing and removing scaffolding, includ...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Providing Coursed rubble masonry (first sort) with hard stone in foundation and plinth with Cement mortar 1:6 (1 cement : 6 coarse sand) complete as per detailed specifications with all lead and lifts...
Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing complete...
Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...
Providing and fixing glazing in aluminium door, window, ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings and the directions of e...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Providing and fixing MS ladder between landings, 45 cms wide using angle iron of specified sizes, 20mm MS bars at 25 cms. centre to centre, with necessary supports of same angle iron etc. as directed,...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as requi...
Providing and fixing Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel et...
Design, fabrication, supply, erection and commissioning of embedded parts consisting of liners for trash rack grooves ( for coarse and fine screenS ) with all accessories for pump house intake structu...
Design, fabrication, supply, erection and commissioning of trash racks consisting of a number of panels of suitable height with vertical trash bars welded to structural steel frame at wider interval a...
Design, fabrication, supply, erection and commissioning of embedded parts (with top seal seat ) consisting of sill beam, wheel tracks, seal seats, guide rails, groove lining upto top with all accessor...
Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift gate ( with top seal ) consisting of skin plate, siffeners, horizontal and vertical girders, wheels, ...
Design, fabrication, supply, erection, testing and commissioning of adequate capacity screw type hoist consisting of supporting structure, platfom, railing, ladder with all accessories for operating c...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical pecifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical pecifications, including setting out, shoring, strutting, barricading, caution lights, includin...
Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...
Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height. T...
Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., Work shal...
Design, fabrication, supply, assembling, testing and commissioning of HT pump panel board made of sheet metal duly painted with recess for cable entries at bottom suitable for 6.6 KV equipped w...
Supplying, installing and commissioning electrode actuated water level transmitter of approved make with all accessoreis to protect against dry running of pump. complete as per detailed specifications...
Supplying, fixing and wiring heavy duty low voltage capacitors conforming to IS 2834. 3 phase, 400/440 V grade, for power factor improvement of rotating machineries like induction motor. complete as p...
Supply, installation and commissioning of soft starter for specified kW load operating at 6.6 KV with load break switch, metering, protection by pass vaccum contactor with all accessories complete hou...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...
Supplying of 1.1 KV LT UG cable XLPE or Heat resistant PVC insulated, PVC extruded Inner sheath armoured UG LT cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness in average +5%...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - LT Cable. 2.5 to 25 Sqmm. complete as per detailed specificat...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff - LT Cable. 35 to 95 Sqmm complete as per detailed specificatio...
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable - Up to 4C x 50 Sqmm complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by enginee...
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable - 3.5 x 70/95/120 Sqmm complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engin...
Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc. using 40 mm dia 2.9 mm thick 2.5m long GI pipe with GI funnel with mesh and suitable size reducer fixed o...
GI/Copper strips for grounding connections,using necessary fixing materials as required 40 x 6 mm GI strip. complete as per detailed specifications with all lead and lifts, loading & unloading charge...
Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI 80. Power Input: 220-240V@ 50/60Hz & Power factor ...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Supplying and Fixing mm dia clampsss A GI pipe bracket upto 2.7 meters long terminated with a reducing collar of 40x25mm to which extra pipe of 175mm length is fixed for fixing MV/SV/MH/FTL street lig...
Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc, for operation on 230 V, 50 cycles. Single phase AC supply conforming to ISS-374- 1979 and with double ball be...
Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. 15" Sweep (450 mm) complete as per detailed specifications with all lead and lifts...
Fixing all types and all capacities of fluorescent /false ceiling / spot light / CFL / LED fittings indoor on the wall/ ceiling / rafters / girders using 23/0.0076" twin twisted PVC insulated wires, r...
Fixing a ceiling / wall mounting fan of all capacities and all types, with necessary clamps and 'S' hook made out of 15mm dia MS rod, with 5 A. ceiling rose of approved quality with necessary length o...
Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...
Supplying and fixing regular MCCB distribution Panel confirming to IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimum IP43 protection provided with Polyurethane (PUR) gasket, with suita...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...
Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and...
Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends, junction boxes, adhesive paste etc , and fixing using inverted wood plugs in case of RCC ceiling and...
Supplying and fixing PVC/metal conduit Deep junction box 19/20mm deep junction box complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer ...
Supplying and fixing PVC/metal conduit Deep junction box 25mm deep junction box complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in ...
Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 2x1.5 Sqmm (Phase & Neutral) 1x1.0 sqmm (Earthwire) FRLS multi strand PVC insulated coppe rwire (confirming to ...
Supplying and wiring adopting loop system in existing PVC Conduit / casing capping using 2x1.5 Sqmm (Phase & Neutral) 1x1.0 sqmm (Earthwire) FRLS multi strand PVC insulated coppe rwire (confirming to ...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 6...
Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps one way Switch complete as per detailed specifications with all lead a...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6Amps 3way socket. complete as per detailed specifications with all lead and...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator two module. complete as per detailed specifications wi...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 16Amps one way switch. complete as per detailed specifications with all lead...
Supplying and fixing of modular switch & connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16Amps universal socket. complete as per detailed specifications with all ...
Providing ABC Powder based MAP 50, 4Kg Supply, installation of 4kg Fire Extinguisher Mono Ammonium Phosphate Powder 50, Stored Pressure Type, Pressure Gauge, Gross Weight 6.9 Kg, empty weight 2.9 Kg, ...
Providing Aqueous Film-Forming Foam - 9 Ltr Supply and installation of 9 Ltr Fire Extinugisher Aqueous Film- Forming Foam Type, Stored Pressure Type, Pressure Gauge, Gross Weight 15.1Okg. empty weight...
Providing 4.5Kg C02 Wheel Type Supply and installation of 4.5Kg C02 gas valve type Fire Extinugisher, Tro lley Mounted, Easy Weight Management used Unused Mechanism, Gross Weight 19.1 Kg. empty Weight...
Supplying Installing, testing and commissioning of Response Indictor constists of twin LED with electronic circuit work on 24 DC enclose in PVC retangular. complete including cost of materials, labour...
Supplying of four bucket stand alongwith buckets. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in charge.
Supplying of two bucket stand along with buckets. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in charge.
Supplying of Hand gloves. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in charge.
Supplying of first aid box. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in charge.
Supplying of SAFETY MASK. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in charge.
Supplying and installation of RUBBER MAT 1mtr x 1mtr -1Omm thick. complete including cost of materials, labour, usage charges of machinery complete as per specifications.
Supply and fixing of 3-pole Capacitor switching contactor with NO/NC contacts and inbuilt damping resistor to protect the contactor and capacitor from highest inrush current , fixed on existing wood/p...
Supplying, fixing and wiring Automatic Power Factor controller circuit unit fully, static units controlled by 14 stage microprocessor operation, relays LED display, self programming function for power...
250 kVA, 11 kV/433 V, 3 phase Delta Star, Dyn11 : Supply of Auxiliary Transformer with copper windings & oil, cable termination type on both HT & LT outdoor type with off load tap changer in steps of ...
GI Pipe, 100 mm Dia for drain crossing, cable raising etc., complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in charge.
Providing 2 Pole Structrue at the Tapping Point Using RCC Pole DP Structure using RCC Pole - 9 Mtr Long, 145 Kg WL (Including Cost of Poles) complete as per detailed specifications with all lead and l...
11 kV HT Metering cubicle of different CT Ratio, Both side cable entry type with 3 CT & 3 PT, With Transparent Cover TTB, with 30x8 mm Copper Busbar, Modem & 2 No of Meters for 3 Phase 4 Wire Metering...
Erection of HT metering Cubicle on Platform. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in charge.
Design, fabrication, supply, assembling, testing and commissioning of Outdoor HT panel board made of sheet metal duly painted with recess for cable entries at bottom suitable for 11 KV equipped...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable 3.5 x 400/500 Sqmm. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT cables 300 to 400 Sqmm. complete as per detailed specificatio...
Making and Fixing pot head for LT Cable/ Heat shrinkable Type Terminations 300 to 400 Sqmm. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by ...
Brass Cable Gland 45mm. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in charge.
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
Epoxy Terminating Kit (Pothead) suitable for 1.1 kV, LTUG Cable 3.5 x 400/500 Sqmm. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff LT cables 300 to 400 Sqmm. complete as per detailed specificatio...
Making and Fixing pot head for LT Cable/ Heat shrinkable Type Terminations 300 to 400 Sqmm. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by ...
11 kV, 3 Core, XPLE HTUG Cable with pressure extruded inner sheeth, ROUND WIRE ARMOURED as per IS-7098 (Part-2) Armouring wires dia and Resistivity as per IS-3975 95 Sqmm, (54 GI Wires - 2.5 mm Dia) c...
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff HT cables 3x95 to 150 Sqmm. complete as per detailed specificati...
11kV Heat Shrinkable Indoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in...
11kV Heat Shrinkable Outdoor Type Cable Termination Kit for XLPE Cable 3x95 Sqmm. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer i...
Making and Fixing pot head for HT Cable/ Heat shrinkable Type Terminations 3x95 to 3x150 Sqmm. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed ...
Supplying and drawing PVC flexible unarmoured copper control cable of approved make. 7 Core 2.5 Sq mm. complete as per detailed specifications with all lead and lifts, loading & unloading charges as ...
Supplying and drawing PVC flexible unarmoured copper control cable of approved make. 4 Core 2.5 Sq mm. complete as per detailed specifications with all lead and lifts, loading & unloading charges as ...
Supplying and drawing PVC flexible unarmoured copper control cable of approved make. 2C x 2.5 Sq mm. complete as per detailed specifications with all lead and lifts, loading & unloading charges as di...
Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron weldi...
Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting,drilling of holes and connec...
Providing and fixing RCC precast fencing pole of size 0.15mx0.15mx2.0m casted in M 20 with 20mm down size aggregates making holes for drawing barbed wire at 30 cm c/c using 8 mm dia vertical 4 TMT ste...
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...
Fabricating, supplying and erection of Mtrs long hot dip Galvanized Octagonal pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangements, includin...
Supplying, and fixing of Hot dip Galvanized M.S.Bracket suitable for out door luminaries and mounted on Octagonal pole using necessary bolts, nuts etc., complete. Single Arm Bracket with 2000mm Standa...
Supply of LED Streetlight with pressure die cast aluminium housing body with optimal heat sink for better thermal dissipation. Diffuser with injection moulded & is made of polycarbonate material with ...
Supply of LED floodlight luminairewith pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...
Fixinghalogen/metal halide /SVL/IL/LEDfloodlight fittingover existingpole/wallceilingincluding clamps,bolts,nutsandwiring
using suitable capacity wires. complete as per detailed specifications with ...
Caution/Danger Board. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in charge.
Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...
1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part- 1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-3975
Laying of cable in Existing Trench/GI pipe/Stone Ware/RCC Hume pipe using Wooden/Aluminum Rollers as directed by the departmental staff 2.5 to 25 Sqmm. complete as per detailed specifications with all...
2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 300 x 50 mm. complete as per detailed specifications with all lead...
2mm thick perforated cable GI tray with on existing MS angle support using necessary GI bolts/nuts and washer or welding as required. 600 x 50 mm. complete as per detailed specifications with all lead...
Design, manufacture, supply, erection, trail running, performance testing and commissioning of vertical turbine pump of approved make conforming to IS: 1710 having specified pump output under specifie...
Providing, Laying and Fixing of GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, includin...
Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments. Size 100 mm. complete as per detailed specifications w...
Providing and fixing of ductile iron double flanged swing check valves with slanted seat or with lever weight with straight disc, with metallic corrosion proof and wear resistant seat faces with nicke...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded / submerged arc welded mild steel ( Fe-410 grade ) delivery pipes of specified...
Manufacturing, supplying, laying in position, aligning, jointing, testing and commissioning of electric resistance welded /submerged arc welded mild steel (Fe-410 grade) manifold pipe system of specif...
Providing and fixing of DI Double flanged wafer type (Concentric) / double eccentrically disc, Resilent seated Butterfly valves confoming to BS EN 593 / IS 13095 with shaft shall be of stainless steel...
Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft...
Supply and fixing of Single / Double chamber triple function tamper proof (Both the orifces to be housed in the single chamber) Air valves with Body and cover in Ductile cast iron of grade GGG 40/50. ...
Design, fabrication, supply, erection, testing and commissioning EOT crane consisting of double girder box type construction, rail mounted end carraiges with long and cross travel arrangement, main an...
OPERATION & MAINTENANCE FOR 1st YEAR (Honnalli) Engaging of Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 2nd YEAR (Honnalli) Engaging of Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 3rd YEAR (Honnalli) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 4th YEAR (Honnalli) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 5th YEAR (Honnalli) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 1st YEAR (Dongri) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 2nd YEAR (Dongri) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 3rd YEAR (Dongri) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 4th YEAR (Dongri) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 5th YEAR (Dongri) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 1st YEAR (Shirgunji) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 2nd YEAR (Shirgunji) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 3rd YEAR (Shirgunji) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 4th YEAR (Shirgunji) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
OPERATION & MAINTENANCE FOR 5th YEAR (Shirgunji) Engaging Chief Mazdoor for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Machine operator for Maintenance of LIS. complete as per detailed specifications as directed by engineer in charge.
Engaging of Watchmen for LIS. complete as per detailed specifications as directed by engineer in charge.
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable ...
De-silting tank bed/Feeder Channel/Canal in dry condition by excavating the deposited bed material and loading the same to transport vehicle (excluding cost of transportation) including cost of all ma...
Buy back of old Panel Board. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in charge.
Buy back of old ML4 Starter (data rate approved for 3 nos = Rs 10500.00 so for 1 no 10500.00 / 3 = Rs 3500.00 for ecah stater) complete as per detailed specifications with all lead and lifts, loading ...
Buy back of old ML4 Starter (data rate approved for 3 nos = Rs 12000.00 so for 1 no 12000.00 / 3 = Rs 4000.00 for ecah stater) complete as per detailed specifications with all lead and lifts, loading...
Buy back of old ML4 Starter (data rate approved for 3 nos = Rs 4500.00 so for 1 no 4500.00 / 3 = Rs 1500.00 for ecah stater) complete as per detailed specifications with all lead and lifts, loading & ...
Buy back of old OCB. complete as per detailed specifications with all lead and lifts, loading & unloading charges as directed by engineer in charge.
Buy back of old pumps. (data rate approved for 3 nos = Rs 34500.00 so for 1 no 34500.00 / 3 = Rs 11500.00 for ecah old pump) complete as per detailed specifications with all lead and lifts, loading & ...
Buy back of old pumps. (data rate approved for 3 nos = Rs36900.00 so for 1 no 36900.00 / 3 = Rs 12300.00 for ecah old pump) complete as per detailed specifications with all lead and lifts, loading & u...
Buy back of old pumps. (data rate approved for 3 nos = Rs52500.00 so for 1 no 52500.00 / 3 = Rs 17500.00 for ecah old pump) complete as per detailed specifications with all lead and lifts, loading & u...
Buy back of old valves (data rate approved for 6 nos = Rs 6000.00 so for 1 no 6000.00 / 6 = Rs 1000.00 for ecah old valves) complete as per detailed specifications with all lead and lifts, loading & u...
Buy back of old valves (data rate approved for 6 nos = Rs 7300.00 so for 1 no 7300.00 / 6 = Rs 1216.67 for ecah old valves) complete as per detailed specifications with all lead and lifts, loading & u...
Buy back of old valves (data rate approved for 6 nos = Rs 6600.00 so for 1 no 6600.00 / 6 = Rs 1100.00 for ecah old valves) complete as per detailed specifications with all lead and lifts, loading & u...
Buy back of old valves (data rate approved for 6 nos = Rs 6000.00 so for 1 no 6000.00 / 6 = Rs 1000.00 for ecah old valves) complete as per detailed specifications with all lead and lifts, loading & u...
Buy back of old valves (data rate approved for 6 nos = Rs 7300.00 so for 1 no 7300.00 / 6 = Rs 1216.67 for ecah old valves) complete as per detailed specifications with all lead and lifts, loading & u...
Buy back of old valves (data rate approved for 6 nos = Rs 6600.00 so for 1 no 6600.00 / 6 = Rs 1100.00 for ecah old valves) complete as per detailed specifications with all lead and lifts, loading & u...
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].