REPAIRS TO STEEL FURNITURE AT ARAKKONAM

Amount

CHAIR VARANDAH Drwg No :FD 256

Removing of old unserviceable Nylon Newar from Chair varandah, cleaning tubular surface and apply one coat of synthetic enamel paint white paint and re canning with 4mm wide new plastic cane as per mat pattern and fix new rubber shoes for all the four legs as per drawing complete all as specified and as directed by Engr-in-charge. Make of Cane : Bombay Plastic/ Swastik/ National Cane

Removing existing unserviceable/ rusted bottom of legs (100 to 150mm length) from chair verandah and supply and fix with new MS tube 12mm dia 1.8mm thick (100 to 150mm length) duly welded including two coats of synthetic enamel white paint over a coat of primer complete all as specified and as directed by Engr-in-charge.

CHAIR CBA STEEL WITH OUT ARMS Drwg No:FD- 75(M)

Removal of old unserviceable cane plastic from chair steel without arm and cleaning the cane holes and recanning the chairs with 2mm width and 0.4mm thick new plastic cane white colour and 4mm width x 4mm thick new plastic cane white for border all sides as per Godrej pattern as per drawing complete all as specified and as directed by Engr-in-charge. Make: Bombay Plastic/ Swastik/ National cane

All as per Item No.2.01 here-in-before but back of chair tubular steel without arms.

CHAIR CBA STEEL WITH ARMS Drwg No: FD-75(M)

Removing existing broken /damaged seat from steel tubular chair with arm and replacing with first class hard wood new seat frame duly canned with 2mm width plastic cane and 4mm for border strands as per Godrej pattern including applying two coats of black enamel painting over a coat of primer as per drawing complete all as specified and as directed by Engr-in-charge.

All as per Item No.3.01 here-in-before but back of chair tubular steel with arms.

Removing existing unserviceable wooden handles of chair tubular with arms and supply and fix with new wooden handles made out of first class Hard wood fixing with suitable screws including applying two coats of black synthetic enamel paint over a coat of primer of approved make as per drawing complete all as specified and as directed by Engr-in-charge.

ALMIRAH LARGE STEEL/GLAZED Drwg No :FD-1031/104/67 Removing existing unserviceable components from Almirah large /glazed steel and supply and fix new components complete all as specified and as directed by Engr-in-charge.

MS lock with 6 lever wih duplicate keys 65mm. Make: Godrej/ Harrison

Shelves made out of MS sheet 1mm thick.

Leg (One No) of steel almirah large/ Glazed made out of MS sheet 1mm thick welded including applying two coats of synthetic enamel paint over a coat of red oxide primer.

MS clamps with bolt and nuts etc., to fix the shelves.

3 way Locking alignment with rod.

Glass panes 3.5mm thick. Make: Modi Guard /Atul Note: Each portion of the door will be measured seperately. Drwg No. FD-104

Handle steel CP of size 100mm long complete including provision of suitable nuts and washers. Make: Godrej /Harrison

ALMIRAH MEDIUM STEEL/GLAZED Drwg No :FD-1032/104/243 Removing existing unserviceable components from Almirah Medium/ glazed steel and supply and fix following new components as per drawing complete all as specified and as directed by Engr-in-charge.

MS lock with 6 lever with duplicate keys 65mm. Make: Godrej /Harrison

Shelves made out of MS sheet 1mm thick duly painted with two coat of synthtic enamel over a coat of red oxide primer.

Leg (One No) of steel almirah large /Glazed made out of MS sheet 1mm thick welded including applying two coats of synthetic enamel paint over a coat of red oxide primer.

MS clamps with bolt and nuts etc., to fix the shelves.

3 way Locking alignment with rod.

Glass panes 3.5mm thick. Make: Modi Guard /Atul Note: Each portion of the door will be measured seperately Drwg No.FD-104

Handle steel CP of size 100mm long complete including provision of suitable nuts and washers. Make: Godrej /Harrison

RACK SIX TIER /3 TIER STEEL Drwg No:FD- 1038/106

Removing existing unserviceable shelves from rack six tier steel and supply and fix new shelves made out of MS sheet 1mm thick and 02 Nos 'V' angle shall be provided at botttom of the shelves to get more strength including nuts bolts, applying two coats of synthetic enamel olive green paint over a coat of red oxide primer as per drawing complete all as specified and as directed by Engr-in-charge.

Removing existing unserviceable iron angle from rack six tier steel and supply and fix new angle iron size 40x40x4mm thick as per drawaing complete all as specified and as directed by Engr-in-charge.

TABLE OFFICE OFFICER STEEL Drwg No: FD-1003/1002 Removing existing damaged unserviceable components of table offce officer steel complete all as specified and as directed by Engr-in-charge.

Top made out of prelaminated particle board 1800x1200x18mm thick exterior grade edges shall be covered with 4mm thick teak wood beading duly polished. Make: Novapan /Architlam Drwg No. FD-1003

Top made out of prelaminated particle board 1620x870x18mm thick exterior grade edges shall be covered with 4mm thick teak wood beading duly polished. Make: Novapan/ Architlam Drwg No. FD-1002

MS lock with 6 lever with duplicate keys 65mm. Make: Godrej/ Harrison

Drawer made of 1mm thick MS sheet duly painted with two coats of synthtic enamel over a coat of red oxide primer.

Hard rubber shoes for leg.

TABLE OFFICE CLERK STEEL Drwg No: FD-1004/84 Removing existing damaged unserviceable components of table offce clerk steel complete all as specified and as directed by Engr-in-charge.

Top made out of prelaminated particle board 1200x610x18mm thick exterior grade edges shall be covered with 4mm thick teak wood beading duly polished. Make: Novapan/ Architlam

MS lock with 6 lever and duplicate keys 65mm. Make: Godrej/ Harrison

Drawer made of 1mm thick MS sheet duly painted with two coats of synthtic enamel over a coat of red oxide primer.

PVC shoes for leg.

FOAM WITH/WITH OUT BACK Drwg No : FD-77/1027

Removing the existing broken /damaged seat planks of form with out back of size and replace with new planks of size 1525x255x25mm of teak wood plank fixed with suitable full threaded nuts and bolts including applying two coats of french polishing complete all as specified and as directed by Engr-in-charge.

Removing the existing broken /damaged seat planks of form with back of size and replace with new planks of size 1800x255x25mm of teak wood fixed with suitable full threaded bolt and nuts with washers and nut including applying two coats of varnishing as per drwaing complete all as specified and as directed by Engr-in-charge.

Removing the existing broken /damaged back planks of form with back of size and replace with new planks of size 1800x150x19mm of second class hardwood (Pillamaradhu) fixed with suitable full threaded bolt and nuts with washers and nuts including applying two coats of french polishing as per drawing complete all as specified and as directed by Engr-in-charge. Drwg No. FD-78/1027

Removing the existing unserviceable square tube size 25x1.8mm supply and fix by welding in table office officer /clk /3'x3' /3'x2' /Dining ORs/ form with /without back including applying two coats of synthetic enamel paint over a coat of red oxide primer as per drawing complete all as specified and as directed by Engr-in-charge. Note: Welding shall be measured separatly.

Welding in repairs to steel furniture length of welding exc 1cm but not exc 5cm.

Welding in repairs to steel furniture length of welding not exc 1cm.

TABLE DINING OR'S Drwg No: FD-165(M) Removing of existing unserviceable top of table dining OR's and replacing the same with new 18mm thick block board and the same shall be covered with new aluminium sheet 22 gauge thick with size of table and 50x75mm lapping to be given all around the table complete and shaking portion of mild steel frame to be welded and the entire steel frame be painted with applying two coats of synthetic enamel black paint over a coat of red oxide primer etc., as per drawing complete all as specified and as directed by Engr-in-charge. Make: ECO board /Novapan

TEAPOY VARANDAH Drwg No :FD-255

Removing the unserviceable top of teapoy verandah and replacing with new prelaminated particle board of size 900x450mm as per drawing complete all as specified and as directed by Engr-in-charge. Make: Archidply /Novapan

PVC shoes for leg.

LOCKER STEEL Drwg No: FD -1029/257

Removing existing damaged unserviceable lock of lockers steel and supplying and fixing with new 65mm size MS lock with 6 lever with duplicate keys approved quality as per drawing complete all as specified and as directed by Engr-in-charge. Make: Godrej /Harrison

Welding the broken hinges 75mm long to locker steel doors of lockers steel by running welding (each door) as per drawingcomplete all as specified and as directed by Engr-in-charge.

Removing existing unserviceable legs and replacing with new legs made out of 1mm thick MS sheet made to shape as shown in the drawing and applying two coats of olive green paint (enamel) over a coat of red oxide primer of replaced portion of locker steel as per drawing complete all as specified and as directed by Engr-in-charge.

Removing old broken damaged hasp and stapples of locker steel and supply and fix new hasp and stappples of size 150mm long chromium plated to the shutters of locker steel complete all as specified and as directed by Engr-in-charge.

Removing old broken hanging rod of locker steel and supply and fix new hanging rod made out of 20mm dia chromium plated pipe 500mm long of locker steel complete all as specified and as directed by Engr-in-charge.

CHAIR EASY STEEL WITH CUSHION Drwg No: FD-358 Removing existing unserviceable components from chair easy steel and supply and fix new components complete all as specified and as directed by Engr-in-charge.

Foam 50mm thick for seat duly stiched with rexin.

Foam 50mm thick for back duly stiched with rexin.

Ply wood 12mm thick for seat.

Ply wood 12mm thick for back.

Handle made out of first class hard wood duly polished.

CHAIR SCHOOL WITH HAND BOARD Drwg No : TP Removing existing unserviceable/ tourn components from chair school with hand board and supply and fix new components complete all as specified and as directed by Engr-in-charge.

Foam 50mm thick for seat duly stiched with rexin.

Foam 50mm thick for back duly stiched with rexin.

Ply wood 12mm thick for seat.

Ply wood 12mm thick for back.

Handle rest made out of 18mm thick prelaminated particle board.

CHAIR COPOLYMER Drwg No: TP Removing existing unserviceable/ broken seat from chair copolymer seat and supply and fix with new seat Nilkamal or Equivalent model No 1 Chair-II and applying one coat of black enamelled paint on steel portions as per drawing complete all as specified and as directed by Engr-in-charge.

LOCKER FLYING CLOTH Drwg No:SD-1365 Removing existing unserviceable MS lock from flying locker cloth and supply and fix new MS lock as per drawing complete all as specified and as directed by Engr-in-charge. Make of Lock: Godrej /Harrison

TABLE 900 X900X 760mmMM STEEL Drwg No: FD-FD-1009 Removing existing damaged unservceable top table 900x900mm steel and supply fix new top made out of prelaminated particle board 900x900mm, 18mm thick exterior grade edges shall be covered with 4mm thick teak wood beading duly polished as per drawing complete all as specified and as directed by Engr-in-charge. Make: Novapan/ Archidply

TABLE 900x600x760mm WITH /WITH OUT DRAWER Drwg No: FD-1008,1007 Removing of old and unserviceable top of table 900x600mm without drawer steel and supply and fix new top made out of 18/ 19mm thick pre-laminated particle board exterior grage one side teak veneered finish and other side having balancing white lamination with 18/19x 4mm thick teakwood beading all around the top and polishing the wooden frame shall be with french polish complete all as specified and as directed by Engr-in-charge. Make: Novapan/ Archidply

BOOK CASE STEEL Drwg No: FD-90(M)

Removing of old damaged glass shutter including locks from book case steel and supply and fix new glass and lock of approved quality and repairing of shutter frame glass and rolling accessories before fixing of glass shutter complete all as specified and as directed by Engr-in-charge. Make of Lock: Godrej/ Harrison

Removing of old unserviceable handle of book case steel and supply and fix new chromium plated handle of approved quality complete all as specified and as directed by Engr-in-charge. Make: Godrej /Harrison

M/s KM Marimuthu Achary

SHANMUGA TRADERS

SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD

Raju Builders

VKR ENTERPRISES