MT on Palkari Makari road km. 0/00 to 1/600

Providing and applying primer coat with Bitumen emulsion (SS-I) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90-1.2kg/sqm using mechanical measn as per Technical Specification Clause 502 including carriage of material upto all leads and lifts as per the direction of Egnineer-in-Charge.

Providing and applying tack coat with Bitumen emulsion (RS-I) using emulsion distributor at the rate of 0.25 to 0.30 kg, per sqm. On the prepared bitumenous surface cleaned with Hydarulic broom as per Technical Specification Clause 503. including entire carriage of materials upto all leads and lifts and as per thedirection of Engineer in Charge.

Providing and laying bituminous concrete 25 mm (twenty five milimetre ) thick with 100-120 (one hunderd -one hundred twenty ) TPH batch type hot mix plant producing an average output of 75 ( seventy five ) tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 to 5.6 ( five point four to five point six ) per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 (five hundred nine ) complete in all respects

Providing and Laying of Hot applied Thermoplastic compound 2.50 mm thick including relectorising glass beads @ 250 grams per square metre area. Thick ness of 2.50 mm is exclusive of surface applied glass beads as per IRC: 35. The finished surface to be level uniform and free from streaks and holes including entire carriage of materials upto all leads and lifts through all modes of transportation as per the direction of Engineer in Charge.