Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.2 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST | |
| 2 | L2₹39.9 L+₹1.5 L (3.93%)Rejected-Finance | L2 | Rejected-Finance Being Other Than Lowest | |
| 3 | L3₹40.0 L+₹1.7 L (4.31%)Rejected-Finance H NO 154 VILLAGE SHIKARPUR PO NAJAFGARH NEW DELHI 110043 | WEST | DELHI | 110043 | L3 | Rejected-Finance Being Other Than Lowest | |
| 4 | L4₹40.1 L+₹1.7 L (4.40%)Rejected-Finance G 124 FLAT NO 4 DILSHAD COLONY DELHI 110095 | SHAHDARA | DELHI | 110095 | L4 | Rejected-Finance Being Other Than Lowest | |
| 5 | L5₹42.6 L+₹4.3 L (11.1%)Rejected-Finance C 204 NANGLI EXTN NEW DELHI | WEST | DELHI | 110043 | L5 | Rejected-Finance Being Other Than Lowest |
Tender Value
₹50.0 L
EMD Value
₹99,960
Closing Date
20 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (EAST) DELHI CANTT-10
GE (EAST) DELHI CANTT-10
CERTAIN PETTY REPAIR AND MAINT WORKS AT CAMP AREA FOR DAY TO DAY MAINT OF BLDGS FOR TRANSIT TROOPS AND OTM/MD ACCN IN THE AOR OF AGE B/R-III UNDER GE (EAST) DELHI CANTT-10
2023_MES_581814_1
GE/DE-100/22-23
Open Tender
Civil Works
Item Rate
180 days
GE (EAST) DELHI CANTT-10
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
Yes
GE (EAST) DELHI CANTT-10
₹99,960
Yes
31 Mar 2023
20 Feb 2023
22 Mar 2023
20 Feb 2023
20 Mar 2023
6 Mar 2023
Amount
Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface etc including raking out joints hacking for key scrubbing down with water etc complete all as specified.
M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces (Cement plaster 1:4) finished even and smooth without using extra cement complete all as specified and as directed.
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM1:6 finished even and smooth without using extra cement complete all as specified and as directed.
M & L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Paymentfor providing grooves shall be made separately). complete all as specified.
M & L for Preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion weather proof paint over a coat of wall primer and 2mm thick wall care putty (JK or Birla) complete all as specified and as directed.
M & L for Preparation of newly plastered surfaces of walls and applying two coats of Oil Bound Distemper over a coat of primer and 2mm thick wall care putty (JK or Birla) complete all as specified and as directed.
M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Oil bound distemper complete all as specified and directed.
M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of Cement Based Paint complete all as specified and directed.
M & L for preparation of plastered or unplastered old decorated surfaces of walls including brooming down or scraping down with steel wire brushes of smoke spots , moulds ,moss efflocerent salts and treading oil and greasy spots, filling the cracks, holes with POP/Putty and applying One coat of exterior acrylic emulsion paint of any tint all as per manufacturers instructions to achive desired finish at any height complete all as directed.
M & L for One Coat of Synthetic Enamal Paint on wooden surfaces including prepration of Old surface of any description, over 10cm in width or girth complete all as specified and as directed.
M&L preparation of new wooden surfaces and applying two coat of synthetic enamel paint over a coat of pink primer on wooden surfaces of any description, not otherwise described over 10cm width or girth, complete all as specified and as directed.
M & L for One Coat of Synthetic Enamal Paint on steel surfaces including prepration of Old steel surface of any description, over 10cm in width or girth complete all as specified and as directed.
M & L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete all as specified.
M & L for applying two coats of synthetic enamel paint, any tint on old painted plastered surfaces or brick, stone, concrete, asbestos cement or plastered surface or girth including preparation of surface complete all as specified and as directed.
M & L for grinding and polishing existing old kota/granite or any other type of flooring and walls all as specified in SSR incl cleaning splashes from floors and walls complete all as specified and as directed.
M & L for preparation of any type of surfaces old/new or in any position and applying two coats of indigo floor paint as directed by Engr-in-Charge and at site complete (Make : Asian/Berger)
Providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat : SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE Repair Polymer including taking down existing roof treatment of any type and also taking down cement plaster on brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and Berger. Note : The application shall be executed on any type of surface and on horizontal/Vertical areas.
Providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @2.0 litre/sqm. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof of Asian Paints or equivalent in Berger/ Nerolac/STP Ltd. Notes: (1) The work shall be executed through authorised applicator of manufacturer only. (2) Authrised Applicator shall be approved by GE before starting of work. (3) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (4) Guarantee: The contractor shall furnish a written guarantee for the effectiveness of the water proofing treatment for a period of Eight years in favour of the GE. A sum equivalent to 2.5% (Two point Five Percent) of the cost of water proofing treatment shall be retained by the Govt from the contractor’s dues as security deposit. The contractor may, however, furnish a fixed deposit receipt in lieu from a Schedule bank pledged in favour of Garrison Engineer.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 Sqm each and removing to store complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sqm but n.exc 4 sqm each and removing to store complete all as specified and as directed.
Taking down shutters of any description not exceeding 2.00 Sqm each complete all specified and directed.
S & F solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S & F for flush shutters 30 mm thick solid core constructions with block boardcore , ply wood face panels commercial type on both side complete all as specified and as directed.
S & F Aluminium alloy powder coated door including frame comprising of section (Door frame single groove 101.6mm x44.45mm x 2.1mm thick, Shutter top 47.62mm x 44.45mm x 1.95mm thick, shutter bottom 114.30mm x 44.45mm x 2.15mm thick, shutter vertical 85mm x 44.45mm x 1.80mm thick, shutter middle 83.5mm x 44.45mm x 2.40mm thick & glazing clip weighing not less than 0.097 kg/Mtr) as approved by GE & as per IS specifications including provision of 5.5mm thick tinted glass/12mm thick prelaminated particle board as required including handles, tower bolt, floor spring, locking arrangement, rubber gasket and stopper complete all as specified & directed.
S&F auminium alloy powder coated windows including aluminum powder coated frames sliding track, bottom weighing not less than 1.015 Kg/RM, sides and top not less than 0.826 Kg/RM double revated and 0.55Kg/RM for window shutter with one fixed glazed shutter and two nos glazed/gauged shutter sliding type with aluminium sections as per series - A (15mm) 3 track of Jindal section numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 5.5mm thick tinted glass/frosted glass of superior quality and stainless steel jali including all standard fittings, complete all as specified and as directed.
S&F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar , aluminium section weighing 0.55 kg/m including necessary joining cleate , glazing clips, rubber packing , anodised aluminium snap beading screws etc., complete all as specified and as direced.
Taking down aluminium door, window and ventilator shutter with frame upto 4Sqm each and refixing in same opening after necessary repair like any type of lock, door closer any type (floor/door), securing glass beads, replacing handles, tower bolts , wiremesh, replacing the broken glass and other minor repair as required at site, complete all as specified and as directed by Engr-in-Charge. (Note : Cost of all fittings and fixtures required as per site shall be deemed to be included in the quoted rate of the item).
S & F for Factory made UPVC (white/Off white colour sliding window three track made out of extruded profiles with wall thickness of members as 2.3mm (1-0.2mm). Window profile with hollow section with multi chamber frame (60mm x 62mm) sash bars (42mm x 67mm). Sliding inter lock (one vertical length in each shutter 45.5mm x 28mm). Glazing head (24.5mm x 16mm) members will be mitred, cut and fusion welded in all corners including drilling of holes for fixing hardware and drainage of water. Making arrangement for fixing of hardware, EPDM gaskets 1.2, 1-0.2mm thick galvanised steel frame (30mm x 21.50mm). Sash bars (30mm x 18mm) profile to be inserted in required profile frame and will be fixed to the wall with 8mm x 100mm long fastners. Hardware : Touch lock to be of Zinc alloy (white powder coated), Steel roller system including 5mm thick glazing with selelcted quality glass, Aluminium track on bottom rail to be of hree track sliding frame, wool pine for sliding sash and interlock, complete all as specified and as directed. complete all as specifed and as directed. (Note:The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.)
S & F E-board 'Everest' make 600x600x4mm thick white prelaminated sett embosed reinforced designer ceiling board tiles of approved texture at all height laid on Hot dipped Galvanised iron imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work shall comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plug, level and justers and screws etc. The last hanger at the end of each main runner shall not be greater than 450mm from adjacent wall. Flush fitting of 1200mm long cross tee (with double stitching) to be interlocked between main runners at 600mm center to form 1200x600mm modules cross tee longer than 600mm to be supported independently. 600x600mm modules to be formed by fitting 600mm long cross Tee centrally between the 1200mm cross tee. Tee, Perimeter wall angle shall be of 0.45mm thick GS sheet of size 19x19mm and 300mm long of white colour all as per manufacture instruction including taking down the existing false ceiling of any type with frame work complete all as specified and directed.
M & L for Mild steel framed work as in doors (as in chowkats) or gates of angle or other section with gusset plates, rails, braces etc., exclusive of steel sheeting or other covering hanging or fastening and fixing complete conforming to Gde Fe-410-0 or Fe-310-0 including shop coat of red oxide including preparation of surface before fixing, complete all as specified and as directed.
M & L for 1.60mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as complete all as specified and as directed.
Maint/repair/greasing of old rolling shutter any type and size incl fittings, accessories as reqd to smooth working of rolling shutter complete all as specified and as directed. (Note :- Greasing/Oiling and any fittings if reqd to smooth functioning of rolling shutter deemed to include in quoted rates.
Welding in repair to hinges/hold fasts/window frame and to other iron articles of windows and doors and any other Iron surfaces at any height as directed by Engr-in-Charge inclusive of all welding materials, each weld shall be of length not exceeding 200mm, complete all as specified and as directed by Engr-in-Charge.
S & F 100mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed.
S & F in repair 100mm size medium weight cold rolled mild steel butt hinges complete all as specified and as directed.
S & F 100mm size stainless steel butt hinges complete all as specified and as directed.
S & F Aluminum Anodised 150mm size barrel tower bolt stove enameled black with bright bolt complete all as specified and as directed.
S & F in repair Aluminum Anodised 150mm size barrel tower bolt stove enameled black with bright bolt complete all as specified and as directed.
S & F 150mm size aluminum adodised cast type handles complete all as specified and as directed.
S & F in repair 150mm size aluminum adodised cast type handles complete all as specified and as directed.
S & F in repair for mild steel pressed oval type handles stove enamelled black for doors 150 mm long complete all as specified and directed.
S & F in repair Floor door stopper of aluminum alloy body and tongue, anodized with hard drawn steel spring and vulcanised rubber piece fixed in floor, over all length of cover plate 140mm complete all as specified and directed.
S & F in repair for 150mm long mild steel barrel tower bolts of extruded section complete all as specified and as directed.
S & F in repair 250 mm long aluminium alloy anodised sliding door bolt with haps, stapple ( bolt type ) and fixing clips of sheet, cast of extraded sections and fixing bolts and sliding bolts of extraded sections or cast aluminium alloy complete all as specified and directed.
S & F 25mm dia Stainless Steel heavy duty hollow Curtain Rod as per required length at site over Door/Window/Ventilator including taking down old UNSV curtain rod with bracket and finials in any position and height complete all as specified and as directed.
S & F heavy duty designer/fancy type Stainless Steel curtain rod brackets fixing to 25mm dia curtain rod , type and pattern as approved by Engr-in-Charge or GE fixed with rawl plug and screws to wall or in any position complete all as specified and directed.
S & F heavy duty designer type Stainless Steel curtain rod finials fixing to 25mm dia curtain rod , type and pattern as approved by Engr-in-Charge or GE complete all as specified and directed. (Note for item No. 47 to 49 : Damage to Brick/stone or any type of wall and existing cement plaster/pointing during fixing of curtain rod/bracket/finial shall be make good and bring back to old position to be done by the contractor and the cost for the same shall be deemed to include in the quoted rate, No extra payment will be made for brick work, re-plastering and painting to the contractor.)
S & F in repair Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperature 1.4mm and fixed to doors and widows with necessary 12mm iron flats with welding and including dismantling of old wire cloth complete all as specified and directed. (Rates are inclusive of welding and supply of flats including reqd nutbolts wherever required)
S & F 3mm thick sheet glass, ordinary quality and glazing with wooden beading not exc 0.5 Sqm in each pane all as specified and directed including hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frame glazed with putty or fixed with beads.
S & F 5.5mm thick sheet glass, ordinary quality and glazing with rubber beading to aluminum frame not exc 0.5 Sqm in each pane all as specified and directed including hacking out old broken glass (any thickness, size, quality or description) complete.
S & F in repair Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm-125gms) complete all as specified and as directed.
S & F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.
S & F in reapir 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket and flush pipe etc complete all as specified and directed
S & F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement with brackets, flush pipe, grating and Union for discharge pipe with grating complete all as specified.
S & F in repair Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms complete all as specified and as directed.
S & F in repair 15mm bore, fancy type CP bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.
S&F in repair 15mm CP Pillar taps cast copper alloy fancy type chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe of 15 mm bore all as specified and directed.
S&F in repair 15mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 15 mm bore complete all as specified and directed.
S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 20 mm bore complete all as specified and directed.
S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head screwed for iron pipe of 25 mm bore complete all as specified and directed.
S & F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected.
S & F in repair vitreous china pedastal pattern water closet (EWC) including flush pipe & seat cover 'P' or 'S' trap complete all as specified and directed.
S & F in repair Vitreous china floor mounted WC (Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover CP jet spary, flushing cistern, with P or S trap with all fitting and fixture, fixed in repair, complete all as specified and as directed. Make : Jaquar Cat Part No. LYS-WHT-38851S300UFSMN/ Jaquar Cat Part No. LYS-WHT-38851S220UFSMN/ Kohler Cat Part No. K- 17629IN-SM-0
S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
S & F Rotational moulded polyethylene water storage tanks 2000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
S & F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and as directed.
S & F in repair 20mm dia Chromium plated towel rail 60cm long including all fittings for fixing complete all as specified and directed.
S&F in repair stop valve cast copper alloy fancy type chromium plated , screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe of 15mm bore all as specified and directed.
S&F in repair 75mm dia brass chromium plated shower rose with neck and swivel joints fancy type suitable for 15mm bore GI pipe all as specified and directed.
S & F in repair counter type vitreous china wash hand basin (WHB) white size 550mmx400mm complete including provn of a pair of mild steel angle iron brackets of suitable size duly painted, 32mm dia CP waste coupling , PVC waste pipe and cutting for pinning ends of brackets in wall etc complete.
S & F in repair Stainless Steel grating plate with central hole 125mm dia suitable for Nahani trap or in any place complete all as specified and as directed.
S & F in repair plastic water closet seat and cover of white colour, closed pattern with flat bottom suitable for pedestral / Semi pedestral pattern water closets and mild steel chromium plated or aluminized hinging device all as specified and directed.
S & F in repair Polyethalene syphon kit assembly (Cascade Type/Wall Hung/Floor Mounted as required) for flushing cistern, fixed in repair, complete all as specified and as directed.
S & F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.
S & F tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 15mm bore and connections complete all as specified and directed.
S & F in repair precast cement concrete type B0 1:2:4 (12.5 mm graded aggregates) louvres and jallies, 45mm thick set in CM (1:4) (measured solid), including all mouldings but excluding frame (Pre cast frame shall be measured and paid seperately) complete all as specified and directed.
S & F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.
M & L for preparation of black top surfaces of road by cleaning with air blower and applying 1.5mm thick road marking strips, dahses, arrows letters etc upto 10cm wide or more (retro-reflective) of white or golden yellow shade/colour using hot thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and driven by experienced operator on road surface including cleaning all loose dirt, seals, oil greases and foreign materials etc complete all as directed by Engr-in-Charge and as per applicators specifications-APCO or equivalent.
S & F for Precast RCC man hole covers of size required at site 100 mm thick medium duty factory made test load 10 tons (MD-10) conforming to IS-12592, complete all as specified and as directed.
Cleaning old sewage lines any dia and cleaning of water with sludge from soakage wells with Mechanically operated 25 tonne truck mounted desludger with 12000Ltr capacity tanker having water fitted high pressure jet machine for cleaning and desludging of sewage line, soak wells, septic tanks etc., shall be used by the contractor as per scheduled programme in writing and completion of each job to the entire satisfaction of Engineer-in-Charge as instructed. (Note : (a) In case contractor fails to deploy the machine as per scheduled programme a recovery of Rs 1500/- per day shall be deducted from his payment. (b) Per day means 8 working Hrs in a day excluding standby period due to any reason.)
Cleaning and maintenance of rain water pipes, open drains, sewage system including WHB bottle traps, Nahani traps, water closet, soil / wastage pipe running on external walls of bldgs, junctions, holes of any description, sewage line of any sizes including manholes upto the final drop outlet into the septic tank of external sewage system to make lines in running/flowing order without blockage/obstruction of any sort at any situations manually or mechanically with all safety precautions as per Govt. Rules by deploying 02 safaiwala daily on all working days including Sunday and holidays being sewage line health hazards work from 0900 hours to 1700 hours complete all as specified and directed by Engr-in-Charge. Note - (a) Contractor shall provide all necessary mechanical equipments / diesel / electrical pump / motor and tools to operate mannually to ensure hygene sanitation during work. (b) Daily attendance shall be maintained in the Attendance Register by the JE concerned and a recovery for absent period shall be made @ Rs 1000/- per person per day. All relevent record shall be maintained by the contractor and to be submitted before making any payment duly signed by Engineer-in-Charge & JE concerned. (c) 02 x Safaiwala to be deployed shall report at PARADE ROAD service centre at 9.00 AM in the morning.
M & L for glazed ceramic tiles in vertical surface 300x450x8-10 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed in CM 1:4 including dismantling of existing floor wall , stone slab of any description complete all as specified and as directed.
M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 including dismantling of existing floor wall , stone slab of any description complete all as specified and as directed.
M & L for Non-Skid coloured ceramic tiles 7-8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15mm thick screed bed in CM 1:6 including dismantling of existing floor wall , stone slab of any description complete all as specified and as directed.
M & L Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including cement screed 15mm thick in CM (1:6) including dismantling of existing floor tiles, stone slab of any description complete all as specified and as directed.
S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and as directed.
S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of plain or corrugated sheeting any gauge thickness including Nainital or similar pattern as in roof covering complete all as specified and as directed.
M & L 20 mm thick Granite (of any type) laid over and incl cement screed base 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing including demolition of existing granite / stone slab of any type and size complete all as specified and as directed.
M & L for machine cut kota stone slab 18-20 mm thick as in flooring laid over and incl cement screed base 15mm thick in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including dismantling of existing floor wall , stone slab of any description complete all as specified and as directed.
M & L for brick work in CM 1:6 using Sub class "B" bricks straight or curved on plan exc. 6mmean radius including demolition of existing brick/block masonry built in cement mortar complete all as directed.
M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth without using extra cement, complete including demolition of cement concrete (unreinforced) in ground floor and paving near 15 cm thick (below or above ground level) all as specified and as directed.
M & L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge all as specified and as directed.
M/S Yamin
M/s Shubh Enterprises
sunil traders
S GOURAV PRAKASH ENTERPRISES
A R construction
Vipul Construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .