Misc repairs to various buildings, fencing, footpath, etc of Area-II Area under GE Saugor

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing),removal servicable tiles to store and rubbish off the premises complete all as specified and directed

Dismantling framed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed.

Dismentling of stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and directed

Demolition of stone sett paving of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed

Demolition of cement concrete in ground floors and pavings not exc 15cm below or above ground floor complete all as specified and directed

Taking down chowkhats or frames with shutters (w/o taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed

Taking down chowkats or frames with shutters (w/o taking of shutters from the frame) exc 1.5 Sqm but not exc 4 Sqm each complete all as specified and directed .

Taking down shutters of any description exc 1sqm but not exc 2sqm each complete all as specified and directed

M&L for brickwork with subclass 'B' bricks, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles, over and including 15mm thick screed bed or beding layer in cement mortar complete all as specified and directed

M&L for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.11 sqm but not exc. 0.18 sqm (400mm x 400mm joint free (rectified) ) as in floor set & jointed in neat cement slurry and pointed in white /coloured cement to match the colour of the tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

All as per Srl item No. 12 above but as in dado / skirting laid over and including 10 mm thick rendering in CM (1:4) -ditto-

M&L for coloured non skid ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed in CM(1:6) complete all as specified and directed

All as per Srl item No. 14 above but as in dado / skirtinglaid over and including 10 mm thick rendering in CM (1:4) -ditto-

M&L for glazed ceramic tiles of size 600mm x 300mm x 7mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed in white/ coloured cement to match the colour of tiles laid over and including 15 mm thick rendering in CM 1:4 complete all as specified and directed .

M&L for 600mm x 600mm x 8mm to 10mm thick coloured vitrified tiles in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the colour of tiles laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed

All as per Srl item No. 17 above but in dado / skirting laid over and including 10 mm thick rendering in CM (1:4) complete all as specified and directed

M&L for 16mm to 18mm thick Granite of any shade ( table rubbed and polished ) in steps, jambs, pillars, windowcills, cooking plateforms and like in cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs complete all as specified and directed

M&L for rounding/ chamferring to edges of stone slabss one edge , such as in steps , cooking plateform and other similar situations complete all as specified and directed

M&L for mirror polished Machine cut kota stone slab flooring 18mm to 20mm thick laid over and including 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed

M&L for Kota stone slab 12mm to 15 mm thick as in skirting laid over and including 15mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed

M&L for machine pressed precast cement concrete coloured chemically treated interlocking paver block any shape and size conforming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment laid over and including 40mm thick uniformly levelled surface of stone dust cushioning including dismantling of floor tiles complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregates) as in sub base of floor to receive tiles complete all as specified and directed

M&L for plain cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / concrete surfaces of finishing the surfaces even and smooth without using extra cement complete all as specified and directed

M&L for two coat cement plaster , first coat 15mm thick CM 1:6 on brick wall surfaces and second coat cement plaster 5mm thick in CM 1:4 mixed with water prooding compound finished even and smooth without using extra cement complete all as specified and directed. Note:-(i) Water proofing compound shall be measured and paid seperately under respective item (ii) Quoted rate shall be quoted including for scaffolding for double storey building

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed

M&L for cement concrete 1:2:4 type B0 ( using 12.5 mm graded stone aggregates ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and incl. necessary form work complete all as specified and directed

S&F GI ( cold rolled) snap grid size of 600mm x 600mm frame work of 24mm x 38mm x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.5 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and incl S&F coloured Non Asbestos designer ceiling cement boards 4 mm thick including dismantling Textile coverings including frames (if any) & cover fillets in ceilings (measured flat & not girthed) complete all as specified and directed

S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm,sideand top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top &bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading , ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mesh 0.45 mm dia etc including necessary cutting holes on wall and floor and confirming to IS complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S&F fixed type ventilators aluminium powder coated of frame size 50.80mm X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less than 2.50 kg/sqm),aluminium wire mess 0.45 mm dia to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as directed by Engr-in- Charge (Al. section thickness 1.50 mm }

S&F glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63.50 mm x 38.10 x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, door shutter consists of top and bottom rail size is 83 x 44.45x 2mm mm , & lock rail size is 100 x 44.45x 2mm mm & style of door shutter is 85mmx 44.45 x 2mm mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor door stopper incl. necessary joining cleats , glazing clips and floor springs etc complete, confirming to IS. Make - Jindal Aluminum / Man Industries or equivalent as approved by GE.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube complete all as specified and directed

S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 4mm thick moulded PVC sheet on the front face & 4mm prelam PVC sheet on back face complete all as specified and directed

S&F 105mm X 60mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including cutting holes and making good in P:C:C 1.2.4 type B-1 (using 20 mm graded stone aggregates) and PCC 1:3:6 type C-0 using 12.5 mm graded store aggregates) for filling in pressed steel frame complete all as specified and as directed

All as per Srl item No.36 above but size 125mm x 60mm -ditto-

S&F 35 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, complete all as specified and directed(with double or single shutter complete all as specified and directed.

S&F second class hardwood factory made glazed and skeleton shutters 35mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a) complete all as specified and directed

S&F galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F in repair galvanised mild steel wire cloth, 0.46mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed

S&F Aluminium handles 150mm size, cast type, anodised complete all as specified and directed

S&F Aluminium, anodised, barrel tower bolts 200mm long of extruded section complete all as specified and directed

S&F 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed

S&F in repairs 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and directed.

S&F in repairs 110mm bore PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall including mild steel clamps complete all as specified and directed

S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed

S&F in repairs PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed .

S&F in repair PVC(SWR) vent cowl of 110mm dia complete all as specified and directed

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors including mild steel clamps complete all as specified and directed.

S&F in repairs PVC (SWR) bend 75mm dia complete all as specified and directed

S&F in repair PVC(SWR) vent cowl of 75mm dia complete all as specified and directed

S&F in repairs for 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant complete all as specified and directed

S&F in replacement GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed

S&F in replacement GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors complete all as specified and directed

S&F in repair PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed.

S&F in repairs chromium plated bib taps, cast copper alloy fancy concealed type long body with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm boreand fixed complete all as specified and directed.

S&F in repairs angular stop valve , 15mm dia, cast copper alloy, chromium plated fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed

S&F in repair vitreous China WHB white flat back size 550mmx400mm including S&F angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling, 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long high pressure complete all as specified & directed.

S&F in repair vitreous China squatting pan 'Orrisa pattern' size 580mmx440mm white with integral foot rests any pattern includingtprovn of cement concrete bedding and making connection with & including P or S Trap complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedastal pattern), white including white seat cover complete all as specified and directed

S&F in replacement rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position of1000 Ltrs capacity complete all as specified and directed.

S&F in replacement rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position of 500 Ltrs capacity complete all as specified and directed.

S&F in repair 25 mm bore PVC coated MS conduit drapery rods, suitable for door/widows curtain with fancy type dooms fitted to each end and brackets fixed to wall incl. removal of existing rod and making good the disturbed surfaces complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed.

S&F 0.45 mm thick galvalume sheet precoated coloured ridge suitable for profile pattern sheet fixed with self driving screws including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof and taking down carefuly complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls, etc., complete all as specified and directed.

S&F steel work in purlins/rafters/posts with round/rectangula/square hollow mild steel section complete all as specified and directed.

M&L for PCC 1:2:4, type B-0 (using (using 12.5mm graded stone aggregates) on roof top as a leveling course / padding to maintain the slope,finished the surfaces even and smooth without using extra cement complete all as specified and directed.

Taking down of old roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height complete all as specified and directed. .

M&L for rendering 15mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed.

M&L for applying evenly a coat of blown type bitumen 85/25 at the rate of 1.50 kg per square metre over a coat of bitumen primer @ 0.30 to 0.50 kg per Sqm and blinding with clean dry sand @ 0.05 Cum per sqm over roof surfaces including preparation of old surface complete all as specified and directed.

M&L for provn of water proffing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 Kg/sqm comprising with following items and all as specified:-

The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed.

Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm

Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane

Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site .

M&L for cement concrete tiles 25cm x 25cm x 22mm thick,with grey cement and no pigment, machine pressed; set, jointed and pointed in neat cement slurry in floors and cut and polished laid over and including 15 mm screed bed in CM(1:4) complete all as specified and directed.

Supply only water proofing compound complete all as specified and directed.

Dismantling posts or struts (wood,steel or RCC ) in natural ground any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed.

Dismantling of barbed wire of any thickness or size complete all as specified and directed.

Demolition of precast cement concrete louvres and jallies of any thickness complete all as specified and directed.

M&L for PCC 1:2:4, type B2 (using 40mm graded stone aggregates) as in foundations, filling and mass-concrete complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed.

M&L for PCC in embedding of chain link fencing, rounded or chamfered on edges type B1 (1:2:4) (using 20mm graded stone aggregates) including necessary formwork complete all as specified and directed.

S&F angle iron fencing posts including cutting tops to shape as directed, drilling holes, notching for wire ets; flat iron fillets including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F MS Flats for supports or stays for chain link fencing and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F10mm dia mild steel plain round bar as in line wire for chain link fencing complete all as specified and directed.

S&F chain link fencing including line wire of mesh size & type as directed by Engineer-in-Charge to any type of standards rail straining bolts Including provision binding wire complete all as specified and directed. Make:-TATA/SAIL/JINDAL

S&F mild steel screw bolts dia of neck 5 to 10 mm dia (machine made) with hexagonal or Square heads at one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or Square nut, length of bolt exc. 5 cm but not exc 10cm complete all as specified and directed.

M&L for applying two coats synthetic enamel paint over a coat of red oxide primer on new steel surface width or girth exc 10 cm complete all as specified and directed.

M&L for applying two coat synthetic enamel paint over a coat of red oxide primer on new steel surface width or girth not exc 10cm when un connected with other painting or when painted in different tint complete all as specified and directed.

S&F galvanized 2 strand 2.00 mm dia steel barbed wire with 2mm dia barbs at 75mm (approx) spacing & straining & fixing to any type of post straining bolts including securing or tying at crossing with and provisions of galvanized mild steel wire staples or steel pins etc. complete all as specified and directed. (Each row of wire to be measured for the purpose of payment, no separate payment shall made for mild steel tying wire staple/pin). MakeL-TATA/SAIL/JINDAL

M&L for coloured designer tiles exterior grade ( ENDURA or equivalent make as approved by GE) 10 mm thick as in flooring laid over and including 15mm thick bed in CM(1:6) set, jointed and pointed in neat cement slurry with grey cement and pigment including dismantling of floor, hearth tiles/ terrazo with cement mortar bedding (but not backing) complete all as specified and directed

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregates) as in sub base of floors complete all as specified and directed.

M&L for precast cement concrete louvres and jallies set in cement mortar 1:4, 35mm thick (mea sured solid), including all mouldings but excluding frame complete all as specified and directed.

v k builder

m/s mohansingh

SAGAR MOTOR AND TRACTOR CO

PK CONSULTANT

maharaja construction and suppliers