COMPREHENSIVE REPAIR/MAINT OF CERTAIN B/R AND E/M WORKS IN OTM ACCN OF 536 ASC BN, ROU, MANDIR MARG, VK LINE AND 636 EME BN ETC IN AREA OF AGE B/R-II UNDER GE SAUGOR

Amount

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required and removing from site complete all as specified and directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in mud mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required and removing from site complete all as specified and directed.

Taking down shutter of any description exceeding 1.00 sqm but not exceeding 2 sqm each and removing from site complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion & making good disturbed ground embedded in Concrete, brick work, masonry etc complete all as specified and directed.

M &L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete, including demolition of existing brick/stone masonry, built in cement mortar incl all quoins, arches, pillars, etc and removel of rubbish outside of MOD land complete all as specified & directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

Supply and fixing Mild steel TMT bars 10mm dia (Fe-500), and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

Supply and fixing Mild steel TMT bars 6mm to 8 mm dia (Fe-500) cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

Material and labour for Precast reinforced cement concrete type B1 (1:2:4) using 20 mm graded aggregate set in CM(1:4) in landings,kitchen platform, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc, including demolition of existing reinforced cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed.

Material and labour for coloured anti skid ceremic tiles 7 to 8 mm thick area of each tiles exc. 0.06 sqm and n. exc. 0.11 sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed.

Material and labour for joint free non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed.

Material and labour for joint free non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm as in dado / skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed.

Material and labour for joint free non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed.

Material and labour for joint free non skid ceramic coloured tiles 7 to 8mm thick area of each tile exc 0.18 Sqm but not exc 0.38 sqm as in dado / skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed.

Material and labour for digital glazed ceramic joint free(rectified) coloured tiles on vetical surfaces size 600x300x7mm thick etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over & including 15mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed.

Material and labour for vitrifed ceramic coloured tile, 8-10 mm thick (square/rectangular) polished area of each tile n exc.0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6) etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed.

Material and labour for vitrifed ceramic coloured tile, 8-10 mm thick (square/rectangular) polished area of each tile n exc.0.36 sqm as in dado / skirting, etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match, fixed over & including 10mm thick rendering in CM 1:4 etc complete, including dismantling of existing floor/wall tiling with cement mortar rendering (but not backing) and removing rubbish from site complete all as specified and directed.

Material and labour for mirror polished machine cut Kota stone slab 18mm to 20 mm thick , as in flooring , laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) etc complete, including dismantiling of existing stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

Material and labour for mirror polished machine cut kota stone slab 12 mm -15 mm thick as in riser / steps, skirting, dado,cills and pillars laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and polishing, fixed over and including 15 mm thick backing coat in CM (1:4) etc complete, including dismantiling of existing stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

Material and labour for Granite slab of any shade( table rubbed and polished) 16 mm to18 mm thick machine cut, bedded and jointed with cement and pointed with white cement with admixture of pigment to match the shade of granite stone, laid/fixed over and including 20 mm thick screed bed CM (1:4), including cutting and polishing type as in cill and jamb/skirting, steps cooking plateforms includig rounding/ chamferring/bull nosing etc to edges of granite slabs one edge and polishing etc complete, including dismantiling of existing stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

Material and labour for coloured designer tiles exterior grade (ENDURA or Equivalent make as given in Appx 'C') 9-10 mm thick as in flooring laid over and including 15 mm thick cement mortor 1:6 set and jointed and pointed in neat cement slurry with grey cement and pigment etc complete, including dismantling of existing floor tiling with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed.

Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade chemically treated with aproved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc. of required strenght, thickness & size / shape, , laid in required colour & pattern over and including 30 to 50 mm thick uniformly levelled surface of stone dust cushioning, including PCC 1:2:4 type B-0 as in coping all around of size 150 x100 mm thick, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement etc complete, including dismantling of existing floor tiling/stone slab/paver block with cement mortar bedding (but not backing) and removing rubbish from site complete all as specified and directed.

Material and labour for cement concrete 1 : 3 :6 type C-2 using 40mm graded stone aggregate as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed.

Material and labour for 25mm thick PCC (1:2:4) type B1 (using 20 mm graded stone aggregate) as in sub base of floor to receive tiles etc, including demolition of existing PCC in any thickness and removel of demolished material to outside of MOD land complete all as specified and directed.

Material and labour for Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed.

Taking down existing cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removel of rubbish outside of MOD land complete all as specified and directed.

Material and labour for 15 mm thick rendering in cement mortar (1:6) on brick / concrete surface finished even and smooth without using extra cement etc complete all as specified and directed.

Material and labour for rendering in two layers, first layers of 15mm thick on stone masonry surfaces or surface other than fair face of brickwork in CM (1:4) and second layer of 5 mm thick in cement morter 1:4 with and including water proofing compound @ 3% by wt of cement etc complete all as specified and directed.

Material and labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling etc complete all as specified and directed.

Material and labour for Providing cement concrete 1:2:4 type B-0 ( using 12.5 mm graded stone aggt ) as in coping , apex stone , bed plate , kerbs including weathering , slightly rounded or chamferred angles and throating and incl. necessary form work etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed.

Material and labour for applying two or more coat of Ist quality acrylic distemper (ready mixed) having VOC contents less than 50 gms/litre of approved manufacturerof required shade and colour complete as per manufacturer's specification including providing and applying plaster of paris putty 1 mm thickness in two layers over plastered surface to prepare the surface even and smooth, including priming of coat of interior primer incl. preparation of new wall surfaces of walls etc complete all as specified and directed.

Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new surfaces., including preparation of surfaces of new walls etc complete all as specified and directed.

Complete removal of existing treatment of old surfaces of walls etc and Material and labour for applying two or more coat of Ist quality acrylic distemper (ready mixed) having VOC contents less than 50 gms/litre of approved manufacturerof required shade and colour complete as per manufacturer's specification including providing and applying plaster of paris putty 1 mm thickness in two layers over plastered surface to prepare the surface even and smooth, including preparation of surface complete all as specified and directed.

Complete removal of existing treatment of old surfaces of walls etc and Material and labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm / litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre / 10 sqm including priming coat of exterior primer applied @ 0.90 litre / 10 sqm over new surfaces, including preparation of surface complete all as specified and directed.

Material and labour for applying three coats of white wash on new or old Ceiling surface including preparation of surface complete all as specified and directed.

Material and labour for applying three coats of white wash on new or old on wall surface including preparation of surface complete all as specified and directed.

Supply and fixing GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24 x 38 x 0.60 mm, Tee Section ( bottom pre coated ) and 24 x 24 x 0.50 mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and including Supply and fixing coloured Non Asbestos designer ceiling cement boards 4 mm thick etc, including dismantling of existing false ceiling any type or ceiling boards in any thickness with frame incl cover fillets complete all as specified and directed.

Supply and fixing 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs fixed with L-type or J-type or cranked hook bolts complete, including dismantling existing damaged Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Supply and fixing asbestos cement, corrugated or semi-corrugated shets in roofs Fixed with L-type or J-type or cranked hook bolts but except sheets complete, including dismantling existing damaged Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings and taking down carefuly complete all as specified and directed.

Supply and fixing 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts complete, including dismantling existing damaged AC sheet ridge/hip for corrugated or semi corrugated sheets from roof etc complete all as specified and directed.

Supply and fixing Pre painted galvalum sheet 0.50 mm thick having aluminum zinc coating 150 gsm/ sqm(AZ- 150) corrugated steel sheet any colour having tensile strength of 550 Mpa as in Roof covering /cladding to wall fixed with self tapping screws complete, including dismantling existing damaged Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

Material and labour for second class hardwood in scantlings , timber clean sawn framed and fixed, including dismantling unframed timber scantlings 40 sq. cm & over in section, in any position etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed.

Material and labour for 2nd class H/W, plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed.

Supply and fixing 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer, including Material and labour PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and as directed.

Supply and fixing 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer, including Material and labour PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and as directed.

Supply and fixing Mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm long including MS angle iron frame 40mm x40mmx 5mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with and two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces, including taking down existing MS shutter with frame complete all as specified and as directed. Note: Single shutters of approx width 0.8 to 1.2 m and ht 1.9 to 2.10 M.

Supply and fixing steel window with side hung shutters with glazing bars devetailed or welded, fixed on and including pressed steel frame of size 80mm x 40mm x 1.25mm thick CRCA profile section with box type hinges, steel handle, steel peg stay etc complete all as specified and directed.

Supply and fixing steel window with side hung shutters without glazing bars and fixed to steel frame etc complete all as specified and directed.

Supply and fixing fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm, half portion will be fixed with 3.5 mm thick frosted glass and half portion will be fixed with louvers with 3.5mm thick frosted glass with rubber gasket and aluminium beading ,aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm),aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements and confirming to IS complete all as specified and directed. Note: Thickness of aluminium section shall not be less than 1.50 mm.

Supply and fixing glazed (5.0 mm thick plain / coloured glass) aluminum door powder coated consisting of frame of 63.50 mm x 38.10 x 1.95 mm size with shutter fixed on frame both side open able on pivotal arrangement with including necessary cutting holes in wall & floor, Door shutter consists of top and bottom rail size is 83 x 44.45x 2mm , & lock rail size is 100 x 44.45x 2mm & style of door shutter is 85mmx 44.45 x 2mm with handles 2 Nos in each door , hinges has fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangemen,floor door stopper incl. necessary joining cleats , glazing clips and floor springs etc complete, confirming to IS complete all as specified and directed.

Supply and fixing aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 39 mm, side and top of size min 92.34X29.70, shutters vertical 39X20 mm,shutter top & bottom of size min 20X39 mm ,shutter interlock min size 39X20 mm with rollers and conceled locking arrangements with 5.00 mm thick tinted glass with rubber gasket, brush and aluminium beading, aluminium grill with fixing arrangement (wt. of grill not less then 2.50 kg/sqm), aluminium wire mess 0.45 mm dia and width of aperture 1.45 mm etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed. Note: Thickness of aluminium section shall not be less than 1.50 mm.

Supply and fixing 35mm thick 2nd class HW factory made plain framed, penelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per : IS 1003 (part I), kiln seasoned and chemically pressure treated, for doors supplied and fitted to chowkats etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed.

Supply and fixing 35 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed.

Supply and fixing 2nd class HW factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats etc, including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer Complete all as specified and directed.

Supply and fixing Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be moulded with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification etc complete all as specified and directed.

Supply and fixing factory made solid PVC moulded door shutterwith wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm prelam PVC sheet on back face, supplying & fixing in frame at site etc complete all as specified and directed.

Hacking out old broken glass (any tickness, size,quality or description) from wooden / steel frames glazed with oil putty or fixed with beads complete all as specified and directed.

Supply and fixing 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

Supply and fixing 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc, including taking out existing wire cloth with beading complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over and including a coat of red oxide primer etc complete all as specified and directed.

Supply and fixing mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed, Length of bolt 200 mm etc complete all as specified and directed.

Supply and fixing Mild steel pressed handles,150mm oval type, stove enamelled black etc complete all as specified and directed.

Supply and fixing mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, Length of bolt 300 mm etc complete all as specified and directed.

Supply and fixing Butt hinges of 100 mm size, Medium weight, cold rolled mild steel and fixed etc complete all as specified and directed.

Supply and fixing Aluminium handles 150mm size, cast type, anodised etc complete all as specified and directed.

Supply and fixing Aluminium, anodised, barrel tower bolts 150mm long of extruded section etc complete all as specified and directed.

Supply and fixing 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed etc complete all as specified and directed.

Supply and fixing door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc complete all as specified and directed.

Supply and fixing 200 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed.

Material and labour for PCC 1:3:6 type C-1 using 20mm graded stone aggregates as in filling of hold fast etc, including demolition of existing cement concrete and removel of demolished material to outside of MOD land complete all as specified and directed.

Cutting holes in brick walls in cement mortar or cement lime mortar and stone wall built in lime mortar for inserting holdfasts in exc. One brick but not exc. two brick wall and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

Supply and fixing framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.

Supply and fixing Steel work in tubular trusses/purlins/posts (of round/rectangula/square hollow section) including angle cleats for jointing with welding confirming to IS.1161- 1979 grade St.-240 complete all as specified and directed.

Supply and fixing 110mm dia PVC(SWR) pipes single soketed in any length with rubber ring jointed fixed to wall or laid in trenches including ms clamps etc complete, including taking out existing PVC pipe with fitting etc complete all as specified and directed.

Supply and fixing PVC (SWR) bends 110 mm dia etc complete, including taking out existing bends etc complete all as specified and directed.

Supply and fixing PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal etc complete, including taking out existing T/Y etc complete all as specified and directed.

Supply and fixing PVC(SWR) vent cowl of 110mm dia etc complete, including taking out existing cowl etc complete all as specified and directed.

Supply and fixing PVC (SWR) pipes 75mm bore single socketed, in any length with solvent joints laid in trenches or in floors/wall etc complete, including taking out existing PVC pipe with fitting etc complete all as specified and directed.

Supply and fixing PVC (SWR) bends 75mm dia etc complete, including taking out existing bends etc complete all as specified and directed.

Supply and fixing PVC(SWR) vent cowl of 75mm dia etc complete, including taking out existing cowl etc complete all as specified and directed.

Supply and fixing 75 mm dia PVC ( SWR) floor trap with grating including jointing with solvant etc complete, including taking out existing floor trap etc complete all as specified and directed.

Supply and fixing 25 mm dia aluminium powder coated droppery rod including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) & end Knobs etc complete, including taking down existing curtain rod with brackets etc complete all as specified and directed.

Supply and fixing GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors etc complete, including taking up or down existing 15 mm dia GI tubing with fitting etc complete all as specified and directed.

Taking down existing 15 mm dia GI tubing and connection and refixing old 15mm GI tubing with new fitting after cleaning in new or old position ( wall, floor, wall etc ) etc complete all as specified and directed.

Supply and fixing GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors etc complete, including taking up or down existing 20 mm dia GI tubing with fitting etc complete all as specified and directed.

Taking down existing 20 mm dia GI tubing and connection and refixing old 20 mm GI tubing with new fitting after cleaning in new or old position ( wall, floor, wall etc ) etc complete all as specified and directed.

Cutting and Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) 15 /20 mm pipe etc complete all as specified and directed.

Supply and fixing PVC float valve assembly including assessories with float valve 20mm dia etc complete, including taking out existing float valve assembly complete all as specified and directed.

Supply and fixing soap dish brass chromium plated fixed to wall with brass chromium plated screw and wooden/ plastic plug etc complete, including taking out existing soap dish complete all as specified and directed.

Supply and fixing Wash hand basin mixture 15mm bore cast copper alloy, with capstan heads, chromium plated, screwd down high pressure, with lettered 'hot' or 'cold' with long screwed shanks and fly-nuts, screwed for iron pipes and fixed etc complete, including taking out existing mixer etc complete all as specified and directed.

Supply and fixing CP hot & cold water wall mixure unit with arrangement for overhead shower and with hot & cold valves cast copper alloy type heavy duty fixed to 15mm bore of pipe etc complete, including taking out existing mixer etc complete all as specified and directed.

Supply and fixing 2 way bib cock with single knob 15mm dia chromium plated, cast copper alloy etc complete, including taking out existing bib tap etc complete all as specified and directed.

Supply and fixing health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position etc complete, including taking out existing Faucet etc complete all as specified and directed.

Supply and fixing C P bib taps, cast copper alloy fancy concealed type with crutch or butterfly handle, sc-rewed down, screwed for iron pipe or for brass ferrule of 15 mm bore and fixed etc complete, including taking out existing bib tap etc complete all as specified and directed.

Supply and fixed angular stop valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe etc complete, including taking out existing angle cock/stop valve etc complete all as specified and directed.

Supply and fixing 125 mm size brass chormium plated shower rose with long body including fixing to steel pipe or union etc complete, including taking out existing shower rose etc complete all as specified and directed.

Supply and fixing gun metal globe /gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore etc complete, including taking out existing gate valve etc complete all as specified and directed.

Supply and fixing bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15 mm bore and fixed (Minimum weight 15mm 90gm) etc complete, including taking out existing bib tap etc complete all as specified and directed.

Supply & fixing pillar taps, fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, fixed etc complete, including taking out existing pillar tap etc complete all as specified and directed.

Supply and fix PTMT PVC grating of 100 mm dia fixed etc complete, including taking out existing grating etc complete all as specified and directed.

Supply and fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges etc complete, including taking out existing towel rail etc complete all as specified and directed.

Supply and fixing in renewal vitreous china WHB white flat back size 550x400mm including Supply and fixing angle iron brackets, C.P pillar tap fency type 01 No 15mm bore, CP waste coupling 32mm dia and PVC waste pipe 32mm dia and PVC connection 450mm long as required high pressure complete all as specified and directed.

Supply and fixing in renewal vitreous china squatting pan 'Orrisa pattern' size 580x440mm white with integral foot rests any pattern including provn of cement concrete bedding and making connection with & including Pors Trap, etc complete all as specified and directed.

Supply and fixing in renewal Vitreous China wash down water closet pan (pedestal pattern), white including white seat cover & fixing bolts, excluding flushing cistern and flush pipe including connection to drain and to flushing pipe syphonage pipe complete all as specified and directed.

Supply and fixing Brass CP bottle traps 40mm bore for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap etc complete, including taking out existing bottle trap etc complete all as specified and directed.

Supply and fixing Vitreous China bowl urinal angle back of size 430 x 370 x 340 mm white (min.), with grating & union for discharge pipe including flush pipe and waste pipe etc complete, including taking out existing urinal etc complete all as specified and directed.

Supply and fixing Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union & CP waste coupling etc., overall size 495mm x420mm with bowl size 410mm x330mm x160mm etc complete, including taking out existing sink with bracket etc complete all as specified and directed.

Supply and fixing PVC valveless syphonic action type flushing cistern low level white with inlet ball valve,float end handle handle including bracket, flush pipe & bend complete of capacity 10 litres etc complete, including taking out existing flushing cistern etc complete all as specified and directed.

Supply and fixing Tolilet paper holder, vitreous China white, box type to walls with CP (CP) brass screws etc complete, including taking out existing Tolilet paper holder any type etc complete all as specified and directed.

Supply and fixing Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long etc complete, including taking out existing Sheet glass shelf assembly etc complete all as specified and directed.

Dismantaling of existing old tank with all fittings and Supply & fixing new Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position, with and including Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic bal screwed for iron pipe and fixed. (min. weight 20mm-210 gms) complete all as specified and directed.

Dismantaling of existing old tank with all fittings and Supply & fixing new Rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position, with and including Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod and high-density plastic bal screwed for iron pipe and fixed. (min. weight 20mm-210 gms) complete all as specified and directed.

Supply and fixing PVC tank covers suitable for 500/1000 ltr capacity water storage tank etc complete, including taking out existing tank cover etc complete all as specified and directed.

Disconnecting PVC / AC / RCC existing water tank of exc. 250 and not exc. 500 lit capacity , setting a side for repair, cleaning and removing all scale and dirts from tanks and from mouths of circulating pipes and hoisting if required reconnecting and refixing in position etc including writing of date of cleaning with synthetic enamel paint complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed.

Material and labour for surface point wiring for one light point or fan point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

Material and labour for surface point wiring for one Call Bell point controlled by one push button switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

Material and labour for surface point wiring for 5Amp independent socket point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

Material and labour for surface point wiring for one 3 pin ,5 Amp socket point with other switch on the same board with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

Material and labour for surface power point wiring with 2.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC Casing -n-caping /conduit of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 2.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

Material and labour for concealed point wiring for one light or fan point controlled by one switch with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

Material and labour for concealed point wiring for one call bell point controlled by one push button switch with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

Material and labour for concealed point wiring for one 5 Amp independent socket point controlled by one switch with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

Material and labour for concealed point wiring for one 3 pin ,5 Amp socket point with other switch on the same board with 1.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green all as directed by Engr-in-charge . Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

Material and labour for concealed power point wiring with 2.5 Sqmm PVC-FRLSH insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC conduit, including modular metal flush boxes & modular white cover plate of suitable module with frame as per site requirement all fittings such as tees, bends, elbows, etc. of External diameter 20mm all as per site requirements PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 2.5 sqmm. cable as continuous earth lead complete all as specified and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and as directed. Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

Supply and fixing Modular switch, one way, 6 Amp 230 volts, 1 module complete all as specified and directed .

Supply and fixing socket Modular 6 Amp-2/3 pin combined 2 module complete all as specified and directed .

Supply and fixing switch Modular, single pole, one way,16 Amp ,1 module 230 Volt complete all as specified and directed .

Supply and fixing socket modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed .

Supply and fixing modular fan step regulator 60-80W, 2 module complete all as specified and directed.

Supply and fixing modular bell push 6A ,1 module complete all as specified and directed.

Supply and fixing switch piano type flush, single pole, one way 5 A 230 V complete all as specified and directed.

Supply and fixing socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed.

Supply and fixing switch piano type flush, single pole, one way 15 A 230 V complete all as specified and directed.

Supply and fixing socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V complete all as specified and directed.

Supply and fixing ceiling rose, surface backlite,three terminal complete all as specified and directed.

Supply and fixing lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.

Supply and fixing bell ding dong 230 V, single phase complete all as specified and directed.

Supply and fixing electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed.

Supply and fixing bell push flush type one way 5Amp 240 Volt complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 4 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 4 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green etc complete, including taking down old unserviceable sub main wiring with casing-caping/conduit complete all as specified and as directed. Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. (ii) Two runs of single core of size 4.00 sqmm for main current and one run of single core of size 4.00 sqmm for earth continuity conductor & one run of pvc casing-and-caping shall be measured as one unit length.

Material and labour for sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FR, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green etc complete, including taking down old unserviceable sub main wiring with casing-caping/conduit complete all as specified and as directed. Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. (ii) Two runs of single core of size 6.00 sqmm for main current and one run of single core of size 6.00 sqmm for earth continuity conductor & one run of pvc casing-and-caping shall be measured as one unit length.

Supply and fixing testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs etc complete, including taking down existing MCB complete all as specified and directed.

Supply and fixing testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs etc complete, including taking down existing MCB complete all as specified and directed.

Supply and fixing sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 100-160 Amps rated bus bar of suitable size etc complete, including taking down existing DB complete all as specified and directed. Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

Supply and fixing sheet metal enclosure DB double door, IP-43 when MCBs to be used SPN, 4 way, 240 V with 100-160 Amps rated bus bar of suitable size etc complete, including taking down existing DB complete all as specified and directed. Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

Supply and fixing LED bulb 10 watt B22 Base suitable for angle / batten holder fitting complete all as specified and directed.

Supply and fixing box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.

Supply and fixing LED Bulk head 13/10 watt designed for modern homes available in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed.

Supply and fixing TL fitting 20 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed.

Supply and fixing socket outlet multi purpose, 3 pin, 15 Amp & 3 pin 5 amp, combination 230 volts etc complete, including taking down existing S/S combination complete all as specified and directed.

Supply and fixing PVC conduit of size 20mm dia including fixing on wall/ceiling with suitable clamp/saddles for wiring wire all as required at site etc complete, including taking down existing PVC conduit complete all as specified and directed.

Supply and fixing PVC casing caping of size 1" x 1/2" including fixing on wall/ceiling with clamp/saddles for wiring wire all as required at site etc complete, including taking down existing PVC casing-caping complete all as specified and directed.

Taking out old unserviceable laminated sheet and S & F new laminated super hylem sheet white colour 3mm thick of size 8" x 5" including fixing of switches, sockets as per existing pattern complete all as specified and directed.

Taking out old unserviceable laminated sheet and S & F new laminated super hylem sheet white colour 3mm thick of size 5" x 5" including fixing of switches, sockets as per existing pattern complete all as specified and directed.

Taking out old unserviceable laminated sheet and S & F new laminated super hylem sheet white colour 3mm thick of size 8" x 10" including fixing of switches, sockets as per existing pattern complete all as specified and directed.

Taking out old unserviceable laminated sheet and S & F new laminated super hylem sheet white colour 3mm thick of size 8" x 12" including fixing of switches, sockets as per existing pattern complete all as specified and directed.

Taking out old unserviceable laminated sheet and S & F new laminated super hylem sheet white colour 3mm thick of size 9" x 11" including fixing of switches, sockets as per existing pattern complete all as specified and directed.

Mohan singh (BID ID -3460699)

RAVI BUILDCON (BID ID -3459788)

v k builder (BID ID -3459697)

maharaja construction and suppliers (BID ID -3460524)

Pandey Construction and Engrs (BID ID -3465472)

M/S vikas jain (BID ID -3460188)

M K Construction (BID ID -3459969)