Renovation of Vice- Chancellor Residence at Dr YSP University of Horticulture and Forestry Nauni, Solan (SH - Providing module kitchen with finishing work etc.).

Amount

Providing and laying cement concrete 1:8:16 (one cement : eight sand : sixteen graded stone crushed aggregate 20mm nominal size)and curing complete on slab and floor excluding the cost of form work screed laid under flooring complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing Cromium plated MS . Hooks and eyes etc. complete in all respect as per satisfaction of Engineer-in-charge. a) 150mm (One hundred fifty milimetre)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level with cement mortar 1:6 (one cement : Six sand) etc. complete in all respect as per satisfaction of Engineer-in-charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level with cement mortar 1:4 (one cement : four sand) etc. complete in all respect as per satisfaction of Engineer-in-charge.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length etc. complete in all respect as per satisfaction of Engineer-in-Charge. ( hold fast lugs or dash fastener shall be paid for separately. a).Sal wood

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws with 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size etc. complete in all respect as per satisfaction of Engineer-in-charge. a) Second class teak wood

Providing and fixing 35 mm thick Second class teak wood glaged shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked MS pressed butt hinges bright finished of required size with necessary screws etc.complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 150x10mm(one hundred fifty into ten milimetre)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : a)125mm(One hundred twenty five milimetre)

Providing and fixing 1st quality ceramic glazed floor tiles (Kazaria / Nitco / Oreintbell make) conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dado over 12 mm thick bed of cement Mortar 1:3 (one cement: three sand) and jointing with grey cement slurry @ 3.3Kilogram per Square Metre including pointing in white cement mixed with pigment of matching shade etc. complete in all respect as per satisfaction of Engineer-in-charge.

Providing and laying Glossy vitrified floor tiles double charged in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, (Kazaria/ Nitco/ Orient bell make), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete complete in all respect as per satisfaction of Engineer-in-Charge.a). Size of tile 600x600mm

15 mm (fifteen milimetre thick) cement plaster on rough side of single or half brick wall of mix with cement mortar 1:6 (one cement: six sand) complete in all respect as per satisfaction of Engineer-in-Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within all lead as per direction of Engineer - in - charge. a). Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all leads etc. complete as per direction of Engineer-in-charge. a). In cement mortar

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within all lead etc complete in all respect as per satisfaction of Engineer-in-Charge..

Supplying and installation of Module Kitchen with work surface of following size with V-groove type moulding jet black Granite 20mm + - mm thick as per layout along with neoprene strip 2.5” width and 6mm thick SR 998 glue for neoprene mat and all unit shutters 18 mm thick MDF glossy UV shutters with 2 mm matching PVC edge band etc. complete in all respect as per satisfaction of Engineer-in-charge. The following size of storage unit and other articles of module kitchen are as under a). Sink Unit 1200 X 560 X 720 mm (Schieber German-Accessories as Ap)- 1 No. b). Base Unitwith S - Corner 1100 X 560 X 720 mm (Schieber German - Accessories as Ap)- 1 No. c). Bottle pullout 300 X 560 X 720 mm (Schieber German - Accessories as Ap)- 1 No. d). Hob unit with cutlery 900 X 560 X 720 mm (Schieber German - Accessories as Ap)- 1 No. e). Masalla pulout 300 X 560 X 720 mm (Schieber German - Accessories as Ap)- 1 No. Nomenclature continued to 17.1

f). Base unit with shelf 450 X 560 X 720 mm (Schieber German - Accessories as Ap)- 1 No. g). Base unit with Grain trolly 450 X 560 X 720 mm (Schieber German - Accessories as Ap)- 1 No. h). Base unit with drawers 800 X 560 X 720 mm (Schieber German - Accessories as Ap)- 1 No. i).Tall unit for appliances 600 X 560 X 720 mm (Schieber German - Accessories as Ap)- 1 No. j). Pantry unit with 4 drawers 750 X 560 X 1960 mm (Schieber German - Accessories as Ap)- 1 No. k).Open tall unit 300 X 560 X 1960 mm (Schieber German - Accessories as Ap)- 1 No. l). Dishrack unit 900 X 310 X 600 mm (Schieber German - Accessories as Ap)- 1 No. m). wall unit with shelf 450 X 310 X 600 mm (Schieber German - Accessories as Ap)- 2 Nos. n).wall unit with shelf 1200 X 310 X 600 mm (Schieber German - Accessories as Ap)- 1 No. o). Cook top 90 cm (IFB/ Glain/ Kaff/ Fiber make) - 1 No. Nomenclature continued to 17.2

p).Built in Oven 58 litre (IFB/ Semsung/ LG make) - 1 No. q).Chimney 90 cm (IFB/ Glain/ Kaff/ Fiber make) - 1 No. r). Built in Dishwasher (IFB/ Semsung/ LG make) - 1 No. s). Side by Side Refrigerator 564 litre (IFB/ LG/ Godrej/ Wirlpool make) - 1 No. t). Geyser 5 litre ABS body (Bajaj/ Philips/ Havell’s/ Usha make) - 1 No. u).Double bowl sink SS 304 grade with 2 Nos. long neck tap (Jaquar make) - 1 No. v). Water purifier (Kent/ Aqusure make) - 1 No. The lay out plan, elevation & 3D drawings are also appended

Anil Jaswal