PROVN OF GATE RAMP FOR A VEH AT ABDUL HAMID STADIUM UNDER GE P NO 1 JABALPUR

Amount

Earth work in excavation in all kind of soil by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Returning filling including spreading, levelling and well ramming in layers not exc 25cm, complete all as specified and directed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles, complete all as specified and directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM(1:6), complete all as specified and directed.

Taking down cement of cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

M&L for rendering 15 thick on fair faces of brick work or concrete surfaces in CM 1:4 even & fair and using integral water proofing compound as per manufaturar instruction, with white sand from narmda river, complete all as specified and directed.

M & L for preparation new treated surfaces of wall and applying two coats of cement base paint including one coat of primer with alkali resistant on plastered and other surfaces complete all as specified and directed..

M&L for RCC (design mix) M-25 ( 20mm graded aggregates) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (design mix) M-25 ( 20mm graded aggregates) as in Columns, footings pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC (design mix) M-25 ( 20mm graded aggregates) as in Beams,Plinth beam, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC (design mix) M-25 ( 20mm graded aggregates) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed.

~Ditto~ all as per srl item No. 13 above but 6mm to 8mm dia,as in stirrups complete all as specified and directed.

Use and waste formwork to sides of concrete foundations, footings, bases of columns, beams, sides and soffits (if any) of foundation and plinth/roof beams; and similar work; vertical or to batter for flat and Rough finished sur faces of concrete complete all as specified and directed.

Use and waste formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough surfaces complete all as specified and directed.

Use and waste formwork to faces of walls,retaining walls, abutments,parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F mild steel, Fe 410-W (Gde E- 250 quality)square/rectangular hollow pipe, Framed work as in doors or gates, rails,braces, sliding rail,bearings, rollers and bearing rollers and all other manually /automatic machinary parts incl all connected fittings/parts etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging;as in gate including all necessary fitting, also fastening and fixing,including designs, letters,including dismantling, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer etc complete all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc.,exc 1.5 and n exc. 3.0 m high from base complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as specified and directed.

M&L Mild steel works as in posts and struts,(Circular Pipe, Sqaure pipe, I section,Beam, tee, channel or flat sections) cutting tops to shape as directed, drilling holes, all necessary drilling, bolting or riveting, etc; including embeding in concrete and screwing etc. and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for rolled mild steel works as in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes,Fe-290 (Gde E16) complete all as speicfied and directed.

M&L for plain cement concrete type B2,1:2:4 (40 mm graded stone aggregates) as in post holes complete all as speicfied and directed.

M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Circular Pipe, Sqaure pipe,I section,Beam, tee, channel or flat sections) including distance pieces, cleats etc Fe-410-W (Gde-E250 quality A complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, valley gutter,fixed with self tapping screws complete all as specified and directed.

S&F 10 mm thick paver tiles out door vitrified tiles area 0.20 to 0.50 sqm each as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 20mm thick screed in CM (1:6) complete all as specified and directed.

M&L for Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm, complete all as specified and directed.

M&L Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, complete all as specified and directed.

M&L for cement concrete 1:5:10, type E-2, (using 40 mm graded stone aggregate) as in mass concrete etc complete all as specified and directed.

M&L for flush pointing in cement mortar (1:4) to brick wall complete all as specified and directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering,complete all as specified and directed.

Deduct schedule of credit amount Rs. 16,200.00 to be deducted during AOC

a k builders (BID ID -3482319)

ELITE ENGINEERING COMPANY (BID ID -3482393)

TRISHLA CONSTRUCTIONS (BID ID -3482434)

R R VISHWAKARMA CONSTRUCTION CO (BID ID -3480927)