C/O COMMUNITY HALL AT HALKHA CHITTERGUL

Site clearence B W O removal of tree trunk ,bushes mulba etc including disp.

Earth work in excavation by Hydraulic means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

P/L of dry Stone soling dully hand packed hand rammed incl stone chippings, all carriages complete with lead of 5 km

P/L cement concrete of 1:4:8mix mortar using Crushed stone aags. Of 20 mm N/S including curing complete

P/L cement concrete M10 of 1:3:6 mix mortar using Crushed stone aags. Of 20mm N/S with20% plums including curing

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in cement mortar 1:6 ( 1 cement : 6 coarse sand) including Extra for brick work above plinth level upto floor V level

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for RCC work incl streightning, cutting, bending, placing in position & binding all complete

12 mm cement plaster of mix 1 : 6 (1 cement : 6 fine sand)

6 mm cement plaster of mix 1 : 3 (1 cement : 3 fine sand)

P/fixing of ordinary timber planks for shuttering including removal of form work SLAB

P/fixing of ordinary timber planks for shuttering including removal of form work

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (including hold fast lugs or with dash fasteners): including primer and painting complete job (Imported wood KD)

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, including 4 mm thick glass pane (weighing not less than 10 kg/sqm), all complete as per direction of Engineer-in-charge.(Imported wood KD) (30mm Thick) including primer and painting complete job including all necessary fittings (tower bolt and handle) and primer

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood (imported wood KD) and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws including all necessary fittings and primer

Carriage of sand and aggregate for the avg. lead of 25km by MT including head load

Carriage of Bricks for an avg. lead of 15 km by MT

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). (windows 4 each and door 6 each)

Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete :150 mm tower Bolts (D)

Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete :100mm tower Bolt(W)

Providing and fixing ISI marked aluminum fittings ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade etc. complete :Link/Godrej Al Drop Lock type

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work wood

Supplying and fixing of 25mm size of medium PVC conducit along with accerssories in surface/ recess including cutting the wall and making good same in case of recessed conduit as required.

Supplying and fixing MS fan clamp type I or II of 16mm dia MS bar anchor bent to shape with hooked ends in RCC slabs or beams during laying ,including painting the exposed portion of loop all as per standard design ,

Carriage of materials cement, shuttring etc in trips

Provision for sign board and photographs and other unforeseen items (STA)