Construction of Kusumi Border to Manihar Sharki Link Road via Hathkui Km- 1, 2(800)

Construction of embankment with approved material obtained from borrow pits with all lifts upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-1 and 300.2 with lead up to 1000m as per technical specification clause 301.5 (Excluding GST)

Construction of Subgrade and Earthen Shoulders Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. (Excluding GST)

Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per Technical Specification Clause 302.3 (Excluding GST)

Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density complete as per Technical Specification Clause 401. (Excluding GST)

Providing ,Laying ,spreading and compacting stone aggregates of 63-45 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density grading 2 as per Technical Specification clause 405. (Excluding GST)

Providing ,Laying ,spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density grading 2 as per Technical Specification clause 405. (Excluding GST)

Edging with straight over burnt bricks, laid dry lengthwise, including excavation, refilling, consolidation, with a hand packing and spreading nearly surplus earth within a lead of 50 metres (Excluding GST)

Providing and applying primer coat with bitumen emulsion (SS) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/sqm usingmannual means. (Excluding GST)

Providing and applying tack coat with VG_10 using bitumen distributor at the rate of 0.30 kg per sqm on the prepared surface cleaned with hydraulic broom. (Excluding GST)

Providing, laying and rolling of open graded Premix Surfacing of 20mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade VG-10 to required line, grade level to serve as wearing course on a previously prepared base, including mixing by H.M.P., laying and rolling with a smooth wheel roller 8-10 tonne capacity finished to required level and grades. (Excluding GST)

Providing, laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grades and cross falls using type "C" seal coat including cost of material, labour, plant, mechinery and T&P, all labour etc. complete as per PWD specification. (Excluding GST)

Laying Cement Concrete Pipe NP3 (burried conduits) on first class bedding of granular material including fixing collar with cement sand mortar 1:2 but excluding excavation, protection works, backfilling, concrete and masonary work in head wall and parapets (300mm dia) (Excluding GST)

Providing and laying reinforced cement concrete pipe NP-3 culverts on first class bedding of granular material in single row including fixing collar with cement mortar (1 Cement : 2 coarse sand) but excluding excavation, protection works, backfilling, concrete and masonary works in head walls and parapets as per Clauses 1106. (600mm dia) (Excluding GST)

P.C.C grade M 10 (i)Nominal mix 1:3:6 Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (Excluding GST)

Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1 202 & 1 203 II. Brick masonry in 1:4 cement mortar (Excluding GST)

Pointing with cement mortar (1:3) on brickwork in sub structure & super structure as per drawing and technical specification clauses 613.3 , 1204 and 1208.4 (Excluding GST)

PIastering with cement mortar (1:4), 15 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1 204 (Excluding GST)

Please Enable Macros to View BoQ information