Electrical Works

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End )

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End

Wiring with 3 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End.

Supply and fixing of 4’20W LED Tube Light for Fitting complete with TW round blocks on wall or ceiling with PVC unsheathed Copper leads from terminals to the fitting.( Make: Phillips/ Havells or equivalent)

Supply and fixing of Bakelite battern holder with 15 W CFL Lamp (Philips make) for BH point.

Supply and fixing of Foot Lamp LED fitting for BH Point.

Supply and fixing of 60W LED street light fitting with LED (Lower end) with 32mm dia. GI pipe (class B) with 1 no.32 mm dia GI bend complete on the existing post/ on wall with PVC unsheathed FRLS copper leads with MS clamps and with painting.

supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18")

Supply and fixing of Ceiling fan Box Heavy Duty with suitable alignment in the Ceiling Concrete Roof.

Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall.

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC Exhaust fan.

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End

Supply and fixing of 3nos.6A two module 3 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections..

Supply and fixing of 25A Flush type Wall Socket 25A DP MCB complete set for AC Plug in flush with wall with earth connection (For AC Plug)

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.

Supply and fixing of Three phase Seven Segment type 4 way 63A distribution board with Metal Door cover Code IP42 Protection , with 63A 4 pole MCB as incoming and Sub incomers 3 Nos 40A DP ELCB and 12 Nos 6-32A SPMCB as Outgoing on Wall with earth connection only. The MCB DB and MCB’s should be with ISI mark. (Hager/legrand)

Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB as incoming and 12 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End.(For Lift-1 Nos)

Supply and fixing of 250A capacity dust and proof cubical panel board of size 7’ ft x 5’ ft x 2’ ft CRCA 16 SWG sheet for outer body and stiffness and doors switches supports respectively along Grouping Meter and with supply and fixing of the following cubical mounting switches with centre bus bar chamber and vertical covers, and cable chamber on both side of the buss bar chamber at the extreme ends on both side and confirming in I.S specifications. 250A 4pole MCCB Switch -1No Outgoing: 1) 100A MCB-8 Nos

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in rigid pipe concealed in wall and ceiling with continuous earth wire connection of 1.5 Sqmm copper wire and making good of the concealed portion with suitable colour.(SD - 55) (for 5 A Plug)

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed portion. (Sd-348) (For 15A Plugs )

Supply and run of 2 of 4sq.mm. PVC insulated SC unsheathed FRLS copper conductorof 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 4sq.mm copper wire and making good of the concealed portion with suitable colour..(SD - 57) (For AC Plug, 9M and 6 M Power Plugs)

Supply and Run of 4 of 10 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 10 sq.mm copper wire and making good of the concealed position. (SD - 358) (From Common Metering panel to 6 Way 7 segment DB in all the floors )

Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (For Street Lights)

Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.

Supply and fixing of the 4x16 sqmm brass cable gland for the 4x16 sqmm PVC Armoured LTUG cable with earth connection.

Supply and providing cable end termination of 4x16 sqmm PVC LTUG Aluminium armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete.

Supply and clarnping of 3-1/2 x 120 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps.(From MV Panel to 250A grouping Meter panel.)

Supply and fixing of brass cable gland for 3-1/2 x 120 sq.mm. PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3-1/2x120sq.mm.PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete.

Supply and Laying of 3 1/2 x 120 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good((From MV Panel to 125A Grouping Meter Panel.)).

Supply and fixing of 40A FP MCB isolator in Metal box FP enclosure in flush with wall and making good of the concealed portion with earth connection. (Legrand (MDS)/ Hager (L&T) make) (Motor)

Supply and fixing of 63A FP MCB in Metal box FP enclosure in flush with wall and making good of the concealed portion with earth connection. (Legrand (MDS)/ Hager (L&T) make)

supply and run of 25mmx3mm tinned copper flat with nessary clamps/supports on Wall/floor/ ground for earth connection. (Panel earthinh and Panel to Ground earthing, Lift Well- 08 Nos)

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection.

Earthing as per the ISI specification with an earth electrode of 2.10metre Class'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mmx 50mmx 6mmwithnecessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 6 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet and supply and fixing of 48W LED street light fitting with LED (Higher end) with 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED street light fitting and SMC box with PVC unsheathed FRLS copper leads from SMC box to fitting and with painting of suitable colour .

Please Enable Macros to View BoQ information