COMPOSITE WORKS FOR MOTHER STATION IN RAJASTHAN GA

PIPING SIZE- 4 INCH — FABRICATION, WELDING, ERECTION, INSTALLATION AND TESTING OF PIPING Receiving and taking over of all Owner supplied materials from Owner's designated place(s) of issue, transportation including loading, unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s) / work site(s) / work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials (except those specified subsequently in SOR), equipment, consumables as defined in Contractor's scope of supply and their transportation to the work site(s); performing all above ground/buried piping fabrication works including cutting, edge preparation (inclusive of grinding the edges of pipes, fittings, flanges etc. to match with the matching edges of uneven / different thickness wherever required), fit up, bending, pre- heating wherever required, welding, threading etc.; erection of pipes of all types and thickness over sleepers, overhead on racks and at all elevations; hook-up with equipment nozzles; all types of inline and online instruments such as pressure / thermal safety valves (other than those covered separately), fittings of all sizes i.e., elbows, reducers, tees, 'o' lets, flanges, blind flanges, spectacle blinds, tapping's for pressure gauges, thermowells, hoses and hose couplings of all sizes, if applicable, vents and drains required for process and hydrotesting purposes etc. including fixing of all types of gaskets (including gaskets for RTJ flanges), bolts, studs and nuts of all sizes; carrying out non-destructive testing (excluding radiography covered subsequently in SOR) such as magnetic particle/ liquid penetration etc. as required; hook-up with existing piping / pipeline installed by others as per drawings wherever required; cleaning and flushing by water / compressed air, carrying out hydrostatic test, pneumatic test, valve functional test and any other type of testing as specified, de-pressurising, dewatering, drying by compressed air if applicable; cutting / rebeveling (as required), pre-commissioning and providing commissioning assistance to Commissioning Contractor / Agency for process piping and commissioning of non-process piping if applicable; clean-up and restoration of site, preparation of as built drawings, documents and project records; transportation of surplus free issue materials to Owner's designated place(s); completing all works in all respects as per the AFC drawings, specifications, standards and other provisions of Contract and instruction of Engineer-in-Charge. Note :- a) Installation of equipment shall be done by bidder as per directions, supervision and guidance of equipment manufacturer Engineer. Bidder shall inform at least 15 days before to owner for mobilizing of Vendor Engineer to site. Commissioning shall be done in presence <(>&<)> guidance of equipment manufacturer Engineer. b) All butt welded fittings end shall generally match with connecting pipe wall thickness. However, in case of misalignment, contractor shall have to do end preparation accordingly without any extra cost. c) All couplings, nipples, plugs for nipple etc. as required shall be supplied and installed by contractor without any extra cost. d) All Gaskets <(>&<)> Nut-Bolts of adequate quantity shall be supplied and installed without any extra cost. e) All items fittings, flanges, valves, pipes below 2" shall be supplied <(>&<)> installed by the contractor under this item, Contractor to quote accordingly. f) Any branch connection taken from mainline shall be considered under this SOR item only. No extra cost shall be paid for the above items.Installation of above ground Carbon Steel Process Piping as per details given below: Size-4 Inch, Thk/Sch-STD, Material-ASTM A106 Gr B (CHARPY), BE, Seamless ,Dimension Std.-B 36.10. Please refer SOR and tender docs for detailed s.

PIPING SIZE- 2 INCH — "FABRICATION, WELDING, ERECTION, INSTALLATION AND TESTING OF PIPING Receiving and taking over of all Owner supplied materials from Owner's designated place(s) of issue, transportation including loading, unloading, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s) / work site(s) / work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials (except those specified subsequently in SOR), equipment, consumables as defined in Contractor's scope of supply and their transportation to the work site(s); performing all above ground/buried piping fabrication works including cutting, edge preparation (inclusive of grinding the edges of pipes, fittings, flanges etc. to match with the matching edges of uneven / different thickness wherever required), fit up, bending, pre- heating wherever required, welding, threading etc.; erection of pipes of all types and thickness over sleepers, overhead on racks and at all elevations; hook-up with equipment nozzles; all types of inline and online instruments such as pressure / thermal safety valves (other than those covered separately), fittings of all sizes i.e., elbows, reducers, tees, 'o' lets, flanges, blind flanges, spectacle blinds, tapping's for pressure gauges, thermowells, hoses and hose couplings of all sizes, if applicable, vents and drains required for process and hydrotesting purposes etc. including fixing of all types of gaskets (including gaskets for RTJ flanges), bolts, studs and nuts of all sizes; carrying out non-destructive testing (excluding radiography covered subsequently in SOR) such as magnetic particle/ liquid penetration etc. as required; hook-up with existing piping / pipeline installed by others as per drawings wherever required; cleaning and flushing by water / compressed air, carrying out hydrostatic test, pneumatic test, valve functional test and any other type of testing as specified, de-pressurising, dewatering, drying by compressed air if applicable; cutting / rebeveling (as required), pre-commissioning and providing commissioning assistance to Commissioning Contractor / Agency for process piping and commissioning of non-process piping if applicable; clean-up and restoration of site, preparation of as built drawings, documents and project records; transportation of surplus free issue materials to Owner's designated place(s); completing all works in all respects as per the AFC drawings, specifications, standards and other provisions of Contract and instruction of Engineer-in-Charge.Note :-a) Installation of equipment shall be done by bidder as per directions, supervision and guidance of equipment manufacturer Engineer. Bidder shall inform at least 15 days before to owner for mobilizing of Vendor Engineer to site. Commissioning shall be done in presence & guidance of equipment manufacturer Engineer.b) All butt welded fittings end shall generally match with connecting pipe wall thickness. However, in case of misalignment, contractor shall have to do end preparation accordingly without any extra cost.c) All couplings, nipples, plugs for nipple etc. as required shall be supplied and installed by contractor without any extra cost.d) All Gaskets & Nut-Bolts of adequate quantity shall be supplied and installed without any extra cost.e) All items fittings, flanges, valves, pipes below 2"" shall be supplied & installed by the contractor under this item, Contractor to quote accordingly.f) Any branch connection taken from mainline shall be considered under this SOR item only.No extra cost shall be paid for the above items.Installation of above ground Carbon Steel Process Piping as per details given below: Size-2 Inch, Thk/Sch-XS, Material-ASTM A106 Gr B (CHARPY), BE, Seamless,Dimension Std.-B 36.10Please Refer SOR and Tender documents for detailed ."

Installation of 4" Valve — "INSTALLATION OF VALVESReceiving and taking over of all Owner supplied materials, equipment's from Owner's designated place(s) of issue, Packing, loading , unloading, Unpacking, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials, equipment, consumables as defined in Contractor's scope of supply and its transportation to the work site(s);installation of valves, flow meters, strainers, equipment's including fixing of gaskets, bolts, studs, nuts wherever required, levelling, aligning, installation and assembly of accessories including accessories for actuators including making electrical connections for such actuators, if any, by bolting/ threading or welding of pipes at all elevations, testing, completing all works in all respects as per drawings, specification, other provisions of Contract and directions of the Engineer-in-Charge.Note:a.) All items fittings, flanges, valves, pipes below 2"" shall be supplied & installed by the contractor under this item, Contractor to quote accordingly. b.) All bolts, nuts, gaskets of all size shall be supplied & installed by the contractor under this item, Contractor to quote accordingly. c.) Contractor works includes all work including tie in with exisitng terminal inside Station and with pipeline Installation of above ground Flanged Valves (Ball / Plug / Check / Gate / Globe) as per details given below:Size-4 Inch, Rating-300#Please Refer SOR and Tender documents for detailed ."

Installation of a 2" Valve — "INSTALLATION OF VALVESReceiving and taking over of all Owner supplied materials, equipment's from Owner's designated place(s) of issue, Packing, loading , unloading, Unpacking, handling from Owner's designated place(s) of issue to Contractor's own stock yard(s)/ work site(s)/ work shop(s) including arranging all necessary intermediate storage area(s) thereof, as required; supply of all materials, equipment, consumables as defined in Contractor's scope of supply and its transportation to the work site(s);installation of valves, flow meters, strainers, equipment's including fixing of gaskets, bolts, studs, nuts wherever required, levelling, aligning, installation and assembly of accessories including accessories for actuators including making electrical connections for such actuators, if any, by bolting/ threading or welding of pipes at all elevations, testing, completing all works in all respects as per drawings, specification, other provisions of Contract and directions of the Engineer-in-Charge.Note:a.) All items fittings, flanges, valves, pipes below 2"" shall be supplied & installed by the contractor under this item, Contractor to quote accordingly. b.) All bolts, nuts, gaskets of all size shall be supplied & installed by the contractor under this item, Contractor to quote accordingly. c.) Contractor works includes all work including tie in with exisitng terminal inside Station and with pipeline Installation of above ground Flanged Valves (Ball / Plug / Check / Gate / Globe) as per details given below:Size-2 Inch, Rating-300#Please Refer SOR and Tender documents for detailed ."

Supply of WNRF 4 inch — Supply including procurement and transportation to worksite(s)/workshop(s) including loading, unloading and handling for the following materials to be supplied by Contractor as per the requirement of PMS, specifications, data-sheets, standards, instructions of Owner/ Engineer-in-Charge and other provisions of Contract.FLANGESSupply of Weld Neck Raised Face (WNRF) Flanges as per details below:Size-4 Inch, 300#, Thk/Sch-STD, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.- ASME B16.5Please Refer SOR and Tender documents for detailed .

Supply of WNRF 2 inch — Supply including procurement and transportation to worksite(s)/workshop(s) including loading, unloading and handling for the following materials to be supplied by Contractor as per the requirement of PMS, specifications, data-sheets, standards, instructions of Owner/ Engineer-in-Charge and other provisions of Contract.FLANGESSupply of Weld Neck Raised Face (WNRF) Flanges as per details below:Size-2 Inch, 300#, Thk/Sch-XS, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.- ASME B16.5Please Refer SOR and Tender documents for detailed .

Supply of WNRF 4 inch with JS — Supply including procurement and transportation to worksite(s)/workshop(s) including loading, unloading and handling for the following materials to be supplied by Contractor as per the requirement of PMS, specifications, data-sheets, standards, instructions of Owner/ Engineer-in-Charge and other provisions of Contract.FLANGESSupply of Weld Neck Raised Face (WNRF) Flanges as per details below:Size-2 Inch, 300#, Thk/Sch-XS, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.- ASME B16.5,with JS HolesPlease Refer SOR and Tender documents for detailed .

Supply of Blind Flanges 4 Inch — Supply of Blind Flanges as per details below:Size-4 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5Please Refer SOR and Tender documents for detailed .

Supply of Blind Flanges 2 Inch — Supply of Blind Flanges as per details below:Size-2 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, RF/125AARH, Dimension Std.-ASME B16.5Please Refer SOR and Tender documents for detailed .

Supply of Spacer and Blind /Fig — Supply of Spacer and Blind /Fig 8/ Spectacle Blinds per details given below:Size-2 Inch, 300#, Material-ASTM A105 (CHARPY), Face/Finish-300, FF/125AARH, Dimension Std.-ASME B16.48Please Refer SOR and Tender documents for detailed .