Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.4 LAccepted-Finance | L1 | Accepted-Finance ADMITTED | |
| 2 | L2₹52.4 L+₹9.0 L (20.8%)Accepted-Finance | L2 | Accepted-Finance ADMITTED | |
| 3 | Not Admitted-Fee/PreQual/Technical | - | Not Admitted-Fee/PreQual/Technical Others-NOT FULFILLING THE ELIGIBILITY CRITERIA AS PER TENDER |
Tender Value
₹41.5 L
EMD Value
₹83,000
Closing Date
20 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE
GE (I) CAMPBELL BAY, ARMY LAND, CAMPBELL BAY, GREAT NICOBAR-744302
SPL REPAIR TO ELECTRICAL OFFICE (S30) BLDG, HELO HANGAR (S58) BLDG AT INS KARDIP, KAMORTA UNDER GE(I) CAMPBELL BAY
2024_MES_639448_1
8122/E8
Open Tender
Civil Works
Item Rate
180 days
CAMPBELL BAY
PLEASE REFER TENDER DOCUMENT AND NIT
8 documents required · 8 mandatory
₹500
GE (I) CAMPBELL BAY
₹83,000
Yes
29 May 2024
24 Feb 2024
22 Mar 2024
24 Feb 2024
20 Mar 2024
4 Mar 2024
Amount
B/R PORTION Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and as directed.
S & F pre-painted corrugated galvalume (55% Aluminium + 43.5% Zinc+ 1.5% Silicon) steel sheets as in roofing /wall cladding, 0.50mm thick (total coated thickness), conforming to AS-1397/ASTM A-792 and having yield strength minimum 550 MPa fixed with self drilling metal coated screw of appropriate size, self taping bolts and fixed as per manufacturers instructions complete all as specified and directed. (Note: The sheet shall be laid with one corrugation side lap and one end lap minimum 150mm all as per manufacturers instructions alongwith wind ties).
S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.
S & F for mild steel screw bolts 16 to 20 mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other or serewed both ends to be fited with washer and one hexagonal or square nut exc 22.5 and n.exc 30cm long complete all as specified and as directed.
Taking down roof trusses, coupled rafters etc, for renewal of any defective members of clear span upto 4m (timber renewed to be measured separately and reassembling) all as specified and as directed.
S & F rolled mild steel work for roof trusses (framed), trussed, purlins, crane grantries, rail and fastenings and heavy bracket framing (beam, tee, angle, channel, or flat section ) including bracket, etc conforming to Fe 290 (Gde-E-165) quality complete all as specified and as directed.
M & L for preparation of new or previously untreated steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.
M & L for painting on new steel surfaces n.exc, 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and as directed.
Taking down of cement plaster of any description or thickness /chipping of cement concrete in any situation from brick or concrete surface including raking out of joints, hacking for key scrubbing down with water to receive new plaster complete all as specified and as directed.
M & L for rendering 15mm thick plaster in two coats (10mm thick backing coat + 5mm thick finishing coat with WPC) on fair faces of brick work or concrete surfaces finished even and smooth (without using extra cement) on walls in CM 1:4 complete all as specified and as directed.
M & L for preparing new plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed.
M & L for rendering 10mm thick in CM (1:6) on fair faces of solid block or concrete surfaces and finishing fair and even without using extra cement complete all as specified and as directed.
M & L for preparing new plastered surfaces of wall and applying two coats of OBD over primer on decorated wall surfaces of any description, complete all as specified and as directed.
Taking down chowkats or frame with shutters (without taking off shutters from the frame), n.exc 1.5 Sqm each complete all as specified and as directed.
Taking down chowkats or frame with shutters (without taking off shutters from the frame), exc 1.5 Sqm but n.exc 4.0 Sqm each complete all as specified and as directed.
Taking down shutters of any description n.exc 1 Sqm each complete all as specified and as directed.
Taking down shutters of any description exc 1 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed.
S & F for second class HW plain, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.
S & F 35mm thick, second class HW plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial veneers ; supplied and fitted to chowkat complete all as specified and as directed.
S & F second class HW, 35mm thick glazed and skeleton shutters, open rebated and rebated for windows/ ventilators and prepared to receive glass or gauge etc., without sash bars, edges of framing plain chamfered or rounded, fitted with cut and mitred beads for screwing glass / gauge etc., sizes of members of shutters as specified in SSR Part-I, Section 8 clause 8.24 (a) complete all as specified and as directed.
S & F stainless steel butt hinges 100mm long, medium weight cold rolled, fixed to timber frame work of doors complete all as specified and as directed.
S & F stainless steel butt hinges 75mm long, medium weight cold rolled, fixed to timber frame work of doors complete all as specified and as directed.
S & F extruded aluminium alloy handles 150mm, fabricated type, anodized complete all as specified and as directed.
S & F extruded aluminium alloy handles 100mm, fabricated type, anodized complete all as specified and as directed.
S & F aluminium anodized barrel tower bolt of extruded section length of bolt 150mm complete all as specified and as directed.
S & F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples all as specified and as directed.
Hacking out old broken unserviceable glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new one complete all as specified and as directed.
S & F 3mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 Sqm in each pane complete all as specified and as directed.
M & L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (ordinary tint) over one coat of pink primer complete all as specified and directed.
Demolition of precast cement concrete block walling as in manhole, septic tank and drains etc built in cement mortor including all quoins, arches pillars etc but excluding ashlar facings dressed stone etc all as specified and as directed.
M & L for precast cement concrete (1:3:6) type C-1 (using 20 mm graded stone aggregate) block masonry with solid blocks, exc 10 cm in width and set in CM (1:4) complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not hacking), removing serviceable tiles away from site and rubbish off the premises complete all as specified and as directed.
M & L for non skid coloured ceramic tiles 300mm x 300mm x 7 to 8mm thick in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed or bedding layer of mortar in cement plaster (1:4) for laying finishes all as specified and as directed.
Demolition of cement concrete (un-reinforced) in ground floors and pavings exc 15 cm thickness above ground floors complete all as specified and as directed.
M & L for providing 75 mm thick plain cement concrete (1:2:4), type B-2 (using 40mm graded stone aggregate) as in plinth protection complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., all as specified and as directed.
M & L for providing 50mm thick cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in flooring complete all as specified and as directed.
M & L for coloured chequered cement concrete tiles 30cm x 30cm x 25mm thick, set in floors etc laid over and including 20mm thick screed bed in CM (1:6) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.
M & L for cement concrete (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in flooring and rounded or chamfered on edges complete all as specified and as directed.
M & L for dividing strip 22mm width of strip, plastic dividing strip, 1.5mm thick complete all as specified and as directed.
M & L for RCC (Design Mix M20) (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.
M & L for use and waste of timber as in form work to sides of concrete foundations, footings, bases of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter all as specified and as directed.
M & L for mild steel TMT bars 10mm dia and over cut to length bent to shape required for fixing including cranking bending spirally for hooping ends and binding with and including mild steel wire (ammended) not less than 0.9mm dia all as specified and as directed.
Description all as per Item No 43 above but 6 to 8 mm dia and over upto and including 10mm dia in stirrups, spacers and binders all as specified and as directed.
Dismantling of wall panelling /ceiling (fibre, pulp, insulation etc) of any description of any thickness including cover fillets complete all as specified and as directed.
S & F anodised aluminium snap grid frame (with minimum 15 micron uniform anodic coating) size of 605 x 605mm consisting of Tee/Angle section, size 40 x 40 x 2mm of approved make conforming to IS-733 in frames of false ceiling including aluminium cleats with necessary CP brass /stainless steel shunk screws, aluminium perimeter angles fixed to wall /wooden frame at centre to centre and fixing frame to level adjusting anchors 8mm dia GI wire with hook in Tee members at 1.5m centre to centre fixed to steel trussed roof complete all as specified and as directed.
S & F perforated particle board/ tiles 12mm thick for insulation and accoustic purpose, 600 x 600mm size fixed in ceiling on snap grid with fixing clips etc., complete all as specified and as directed.
M & L for preparing new plastered surfaces of wall and applying two coats of anti fungal interior surface of column acrylic emulsion on wall surfaces of any description complete all as specified and as directed.
M & L for preparing new plastered surfaces of wall and applying two coats of anti fungal exterior acrylic emulsion on wall surfaces of any description complete all as specified and as directed.
Demolition of concrete of any description and in any position not other wise specifically provided for reinforced concrete complete all as specified and as directed.
M & L for precast RCC (1:2:4) type B-1, (using 20mm graded stone aggregate) as in cover slabs, manholes, covers and similar article including necessary form work complete set in CM (1:4) all as specified and as directed.
M & L for hardcore of guage n.exc 63mm, deposited, spread and levelled in layers n.exc 15cm thick watered and rolled/rammed to a true surface all as specified and as directed.
E/M PORTION Taking down old unserviceable point wiring, (light, fan, socket or power) complete including fittings & fixtures such as switch, ceiling rose, pendants, regulator, socket, etc., and making good the disturbed surface of wall, floors, ceiling etc to match with the existing including touch up of paint/white wash complete all as specified and as directed.
M & L for point wiring casing capping on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 Sqmm (nominal area) multi stranded copper conductor cable drawn through in and including non metallic medium grade rigid PVC casing capping heavy grade accessories, ISI marked, suitable size including all accessories, surface on walls by driling using machine and making good the disturbed surface, with and including suitable boxes, switch plates of suitable make and 1.5 Sq mm copper earth continuity wire connected to earth dolly for One light point controlled by one switch complete all as specified and as directed.
Description all as per Item No 54 above but One Fan point controlled by one switch complete all as specified and as directed.
Description all as per Item No 54 above but One socket 5 Amps on same board complete all as specified and as directed.
Description all as per Item No 54 above but One socket 5 Amps on independent board complete all as specified and as directed.
Description all as per item No 54 above but with 4 Sqmm cable for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and as directed.
S & F switch piano, flush type single pole, one way 5 Amps complete all as specified and as directed.
S & F socket outlet 2 in 1, 3 pin 5 Amps complete all as specified and as directed.
S & F switch socket combination outlet 2 in 1, 3 pin 5 Amps flush type complete all as specified and as directed.
S & F switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed.
S & F stepped type electronic fan regulator flush type complete all as specified and as directed.
S & F Ceiling rose PVC/ polycarbonate insulated body with three terminals complete all as specified and as directed.
S & F wall mounted LED 18/20 watts with out put of 1800 lumens, box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver connector block etc., complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts including removal of old existing unserviceable tube light fitting complete all as specified and as directed.
S & F energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opal diffuser pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb and removal of old existing unserviceable tube light fitting complete all as specified and as directed.
Taking down the Celing fans of any model, size & sweep carefully from its original position and dismantling motor and over hauling complete by cleaning all dust / grease with kerosene or petrol, & replacement of unserviceable bearings, bushes, split pins, nut and bolts and applying new grease for bearings, reassembling the motor and fixing the blades, preparation old surfaces of fan of any sweep & model and painting the with synthetic enamelled paint by spraying including filling cavities and testing and refixing the same complete as directed by Engr in Charge.
Note: (i) Any Parts required for replacement shall be measured and paid seperately under appropriate item as ''Supply only'' (s) of this schedule. However labour element involved in replacement is included in unit rate quoted against this Item. (ii) Any unforeseen minor repair and minor parts like Rubber bush, MS Clamps, split pins, base frames, nuts, bolts etc that are covered under this item and required to complete the repair work / smooth functioning of Fan Motor shall be deemed to be included with the unit rate .Transportation of Stator / Rotor parts for machining & rewinding, shaft / bushing for machining , welding , turning at lathe shop at Port Blair are also deemed to be included with unit rate. (iii) Rewinding of stator / rotor of motor, any machine work which where involved shall be measured and paid separetely against relevant item of this schedule.
Supply only following spares of ceiling / exhaust fan of any model, size & sweep to incorporate against each Item of Schedule 'A' here-in-above complete all as specifed & directed (a) Supply only ball bearing suitable for Ceiling fan upto 1400 mm sweep complete all as specified and as directed.
(b) M & L for rewinding the motor of ceiling Fan upto 1400 mm sweep by unscrewing without damaging any parts, rewinding the same with fine quality of super enamelled copper winding wire of suitable size & capacity including varnishing, drying etc, and refixing the stator and rotor perfectly to rotate smoothly and connection alongwith fixing of suitable fan capacitor complete including taking out burned unserviceable copper winding wire all as specified and as directed. Note for item Nos 65 & 66 : Rates for incorporation of new fan capacitor of suitable capacities for smooth runinng of fans are deemed to be inclusive in the quoted rates
M & L for submain wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2 x 4.0 Sqmm drawn into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 4.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire and removal of old existing unserviceable wiring complete all as specified and as directed.
S & F in replacement sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including refixing / fixing of incoming & outgoing MCBs and making smooth the wall surfaces and removal of old existing unserviceable MCB DB complete all as specified and as directed.
S & F MCBs of following rating and taking out MCBs of any rating complete for the following : (a) MCB SP 6 to 32 Amps 240V ,"C" Series, with breaking capacity 10 KA complete all as specified and as directed.
Description all as per Item No 69 above but : (b) MCB DP 32 Amps 240V, "C" Series, with breaking capacity 10 KA complete all as specified and as directed.
Dismantling and taking out old unserviceable earthing and M & L for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6mm burried earth pit not less than 2.25m depth below normal ground level with to edge of the plate vertically to depth of not less than 1.5 m below ground level connected to & including Galvanised earth wire 4 Sqmm by mean of GI bolts & nuts etc., with provision of charcoal and salt etc; all as per electrical plate No-3 of SSR-2020 with and including RCC cover and MS angle iron frame, watering with GI pipe 20 mm dia (medium grade) & MS funnel, concrete pit including excavation and earthwork and testing on completion etc., complete all as specified and as directed by Engr-in-Charge. Note : (i) Refilling of the earth pit shall be carried out with black cotton soil. (ii) GI wire 4.0mm dia & GI protection pipe upto 7.5 m length will be measured under this item. (iii) On testing after completion, if the desired earth resistance is not obtained the earthing will be redone to the entire satisfaction of Engr-in-Charge at no extra cost
Taking down serviceable point wiring, carefully (light, fan, socket or power) complete including fittings & fixtures etc., and making good the disturbed surface of wall, floors, ceiling etc to match with the existing including touch up of paint /white wash all as specified and as directed.
Taking down serviceable fittings carefully (light, fan, switch, socket, ceiling rose, fan regulator etc) complete including fittings & fixtures etc., and making good the disturbed surface of wall, floors, ceiling etc to match with the existing including touch up of paint/white wash all as specified and as directed.
Labour only for re-fixing point wiring on walls and surface on ceiling and drawn through in and including stove enamelled steel conduit complete with above material as per Item No 71 with all accessories for One light point controlled by one switch complete all as specified and as directed.
Fixing only switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and as directed.
Fixing only flame proof light complete with above material as per Item No 72 complete all as specified and as directed.
Fixing only sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including refixing / fixing of incoming & outgoing MCBs and making smooth the wall surfaces complete all as specified and as directed.
S & F fire proof metal sheet boxes for cable entry with terminal and fixing MCB Box 8 way of suitable size on wall with MS clamps, nut bolts, washers and glands with and including suitable MCB Box and suitable for cable all as specified and as directed .
Taking down serviceable MCB DBs, MCBs carefully complete including all accessories etc., and making good the disturbed surface of wall, floors, ceiling etc to match with the existing including touch up of paint/white wash complete all as specified and as directed.
Fixing only MCB SP 6 to 32 Amps 240V , "C" Series, with breaking capacity 10 KA complete all as specified and as directed.
Fixing only MCB DP upto 40 Amps 240V, "C" Series, with breaking capacity 10 KA complete all as specified and as directed.
M/S Sudhir Kumar Gupta
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .