Repair and Renovation works in Swamy sannathi, Ambal sannathi, Arthamandabham, Mahamandabham,Uba sannathi, Madappalli, Office room, Thirumathilwall, Thirumalapathi mandabam, Entrance Mottagopuram and Rajagopuram

Amount

Scaffolding charges for Vimanams and Gopurams with casurina posts coconut or palm trees wherever necessary for main, form work and providing with net lawn / PVC mesh coverings, providing ladder arrangements, country wood plank for working, inspection etc. complete, hire charges only for erection, maintenance and removing the same on completion of the work

Vimanam /Gopuram upto 15'-0" Height

Vimanam /Gopuram upto 25'-0" Height

Providing water jet washing in the granite portion by using appropriate equipements with all its accessories etc.from the granite surface and making it into original surface including cost and conveyance of hire charges for all tools and plants and final clearing etc complete.

Pointing the joints with Lime mortar 1:1.5 (One lime and One and half sand) including cost of special tiles such brush and watering,curing etc complete as per standard specification.

Brick masonry Lime Mortor1:2 (One lime and Two sand) using Country bricks including all varivargams, moulds, sthambams, mukapathrams, koodu, nasi and all ornamental brick work complete, all pancharams, agarais, karnakoodus, etc., forming core walls of Rajagopuram/ Vimanams complete including cost and conveyance of all materials including cement, all the labour charges including marking pathies shaping of the bricks, lifting of all the materials to required heights, curing and all extra for working in heights etc., complete 100 cft for vimanam / gopuram.

For Kalkaram Upto 15' ht

Scraping the decayed lime plaster from the surface of Vimanams and Gopurams, carefully including isolated bricks or brickwork without damaging the vari vargams, racking out the joints, cleaning the surface with water, includinng all working in heights, hire charges for special tooks, brushes complete superficial area including all folds - 100sft.

Vimanams / Gopurams upto 50' 0" height

Providing Vargapoochu over the corewalls of Vimanams / Gopurams, with Lime Mortor 1:1.5 (One lime and One and half sand) complete including shapping the mukhapathram, mahanasi, Koodu all ornamentals works to proper shape by embdding broken bricks of shaped/chiselled bricks, rough-plastering with L.M. 1:1.5 (One lime and One and half sand) and finishing withfinal ornamental plastering and nayam theervani including cost and conveyance of all materials, labour therefore, lifting of materials, all working in heights, curing with water etc, complete inculding all axtra for folding and inculuding clearing from the vimanams/gopurams 100sft superficial area.

For Kalkaram

Vimanam of ht. Up to 15' excluding Kalkaram

Clean removal of old Lime plaster and Replastering in with lime Mortor1:1.5 (One lime and One and half sand),12mm thick including cost and conveyance of all materials and all labour charges, curing etc,complete complying with standard specifications.

Clean removal of old Lime plaster

Plastering in with lime Mortor1:1.5

Thorough scrapping of old plastered surface for White Washing, Colour Washing & Distempering include cost of all materials for brushes etc , labour charges complete complying with standard specifications .

Painting with multicolour (Panchavarnam) good Emulsion paints complete for the Vinamans / Gopurams, inculding cost and conveyence of all materials, lobour charges inculding Artist painter, working in heights, lifting of material, cost of brushes etc, complete-which including all extra for foldings-100sft, superficial area.

Vimanam of ht. Up to 15' excluding Kalkaram

Vimanam of ht. Up to 25' excluding Kalkaram

Painting two coat with approved Water based Emulsion over the cement plastered wall surface, ceiling and other new surface including clearing preparing the surface curing in all floors including brushes etc., complete as per specification. -10 m 2

Clean removal of old paint from the surface of wooden door and Painting old wood work with two coats of enamel paint of approved quality and color over one coat of white primer in all floors the rates is to include cost of all materials, brushes scaffolding charges etc, complete complying with standard specifications.

Clean removal of old Paint from the wooden surface

Painting old wood works

Clean removal of old paint from the surface iron work and Repainting old iron works such as gate, steel doors windows ventilators with two coats of approved quality and color of synthetic enamel paint over Zinc chromite primer in all floor etc, complete complying with standard specifications.

Clean removal of old Paint from the Iron surface

Painting old Iron works

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable Powder coated MS duct with door arrangments on wall and ceiling with accessories with Module GI switch box on wall with wall with 6A one way module switch with module front plate with continuous earth wire connection by 14 SWG TC wire for Open MS duct Light point / fan point (for electronic regulator) (5 points / Coil) Higher End

Supply and fixing of 4' 20W LEB battern on wall or ceiling or existing duct with TW round blocks with copper leads from fittings to Terminals

Supply and fixing of 7W/9W LED for BH point.

Supply and fixing of 375 mm (15") sweep (Heavy duty) AC Exhaust fan complete without provision.

Supply and fixing of louvers shutters arrangements for 375mm (15") sweep (light duty) AC exhaust fan

Supply and fixing of 450mm 18" Wall Fan with Pillar Clamp 1½ x ¼ MS flat with bolt and nuts for fixing the Fan on pillar with necessary connection. (Higher end -like Almonard / equivalent)

Supply and fixing of 22W LED 6" Round Surface type fitting with necessary accessories and electrical connections complete. (Higher end like Orbit (ORSF 22W / Equivelent )

Supply and run of 5 core 2.5 sq.mm flexible copper wire with necessary accessories with electrical connections complete. (for Gopuram focus lights)

Supply and run of 35mm x 20mm powder coated duct with door arrangements complete with MS angle and bolt & nuts comple.

Supply and run of 35mm x 45mm powder coated duct with door arrangements complete with MS angle and bolt & nuts comple.

Supply and run of MS flat with nitrle rubber insulation for clamps of size 2' x 1' on pillar with suitable Bolt / nuts and painting of suitable colour.

Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling or in existing duct with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe in existing duct or on wall with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour

Supply and fixing of 2 nos.6A two module 5 pin socket , 2 nos. 6A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End (Set plug)

Supply and fixing of 1 no.6/16A two module socket, 1 no. 16A one module switch on suitable module surface mounting Box (Plastic) with module cover plate (plastic) on wall with connections. Higher End

Supply and fixing of 30W LED focus fitting complete on suitable MS angle with suitable MS clamp.(ORBIT / Eql)v(ORFL 30W)

Supply and fixing of 100W LED Focus / Flood light fitting complete with 1" dia GI pipe supports between the walls with suitable MS clamps, painting and electrical connections complete.

Supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

Supply and fixing of sintex box (SMC) with 1 no. 6-32A SP MCB, 16A bakelite connector on a hylem sheet ith inter onnections complete.(For street light lights / focus / flood lights)

Supply and Laying of 3½ x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 3½ x 25 sq.mm PVC LTUG armoured Alu cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3½ x 25 sqmm PVC armoured LTUG cable with earth connection.

Supply and providing cable end termination of 3½ x 25 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and clamping of 4 x 10 sq.mm PVC LTUG armoured Alu cable in on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 4 x 16 / 4 x 10 sqmm PVC armoured LTUG cable with earth connection.

Supply and Laying of 2 x 6 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.

Supply and clamping of 2 x 6 sq.mm PVC LTUG armoured Alu cable in on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 2 x 6 sq.mm. PVC LTUG armoured cable with earth connection

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 6 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming, 1 no. 63A TP MCB and 15 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End

Supply and fixing of 63A (500V) three phase meter box fabricated with 16 SWG CRCA Sheet comprising of with 3 nos. of 63A fuse units, 1 no. 63A 30 mA FP ELCB, provision for fixing TNEB meter with inter connections and with required accessories on wall complete.

Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry

Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection

Add GST 18%

LAKSHMI CONSTRUCTIONS (BID ID -1449014)