SPECIAL REPAIR TO ROOF OF BLDG NO P 314 P 321 P 309 OF SCC BHOPAL SPECIAL REPAIR TO FENCING NEAR P 109 AND CERTAIN MINOR WORKS AT SI LINES UNDER GE BHOPAL

Amount

Note :(i) Please refer Sch A/ BOQ Notes before quoting the tender for all phases/ items mentioned below. (ii) Amount of Schedule of credit shall be deducted offline

Taking up or down 15mm dia steel tubing and connection complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connection complete all as specified and directed.

S&F tubes 15mm dia, `medium grade' galvanised, with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F tubes 20mm dia, `medium grade' galvanised, with all fitting and fixed to walls and ceilings or laid in floors complete all as specified and directed.

S&F in repairs ball brass valves, high pressure, with polyethylene float and fly nut, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

S&F in repairs 15mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

S&F in repairs 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and directed.

Demolition of brick work or stone masonery built in cement mortar complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of bricks walls surface finished even and smooth without using extra cement including water proofing compound complete all as specified and directed. Note:- Water proofing compound measured and paid seperately.

M&L for 15mm thick rendering in CM 1:6 on fair face of brick walls/ concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster, terrazzo/cement dado, skirting etc of any description on brick/stone walls, concrete surfaces etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for cutting chases in stone concrete block or slab wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth complete all as specified and directed.

Cutting holes in brick walls exc half brick but not exc one brick in cement mortar or cement lime mortor for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hosting if required, reconneting and refixing in position capacity exc 500 and n exc 1000 ltr. including cleaning and removing all scale and dirt etc from tanks and from mouth of circulating pipes etc complete all as specified and directed.

M&L for refixing of serviciable GI tubing 20 mm dia and new connections including cleaning for refixing complete all as specified and directed.

M&L for refixing of serviciable GI tubing 15 mm dia and connections including cleaning for refixing complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to store complete all as specified and directed. (Note; Measured overall as fixed along the centre line over fitting and accessories)

S&F PVC(SWR) pipes 110 mm bore single socketed in any length with rubber rings joints fixed to walls/ laid in floors complete all as specified and directed.

S&F PVC(SWR) bend of bore 110 mm complete all as specified and directed.

S&F PVC(SWR) branch piece single (Y) equal or unequal bend of bore 110 mm complete all as specified and directed.

S&F PVC(SWR) junction single (single 'T') equal or unequal of bore 110 mm complete all as specified and directed.

S&F PVC(SWR) vent cowl of bore 110mm complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L for water proofing roof treatment to non accessible RCC roof with APP modified membrane with non woven polyster reinforced weight not less than 3.5 Kg/Sqm of thickness not less than 3 mm having thermal insulation with plain on upper side of membrane uniformly embedded during manufacturing process including silver paint to be applied after laying of membrane complete all as specified & directed and as per following sequence and specifications:-

(a) Complete removal of existing treatment including padding/plastering/PCC/Brickbat/ coba or any type water proofing treatment.

(b) Conducting ponding test for 72 hrs, after ponding test grouting is to be done at the leakage area. Note : Grouting shall be measured and paid seperately.

(c) After the surface is repaired with pressure grouting the slab will be tested for water tightness again for 72 hrs before processing further treatment.

(d) 10mm thick plaster in CM 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab. Note : WPC shall be measured and paid seperately.

(e) The surface of the roof, parapet and gutters, drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matters such as fungus, mass, dust etc. by wire brushing and dusting. For cast iron drain outlets the grow shall be cut around to tuck in the treatment as pipes, chimneys stacs etc and other similar situations to ease up about corners.

(f) Bituminous primer 85/25 blown type @1.2 Kg/sqm to be applied and prepared the surface till surface is properly impregnated.

(g) APP modified water proofing membrane as specified shall be laid on the primer surface by torch application method as per manufacturers instruction, the overlaps while torching shall be 100mm in both directions (longitudinal and transverse directions). All overlap joints shall be sealed thoroughly by thermofusing both the membrane layers and sealing it with the help of hot trowel. The overlap joints shall be made as monolithic layer.

(h) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SVR latex @ 200ml per bag of cement and cured well before laying the memebrane.

(j) Providing cement concrete as in padding of roof, parapets, roofkerbs, copings and the like complete. (Note : This item will be measured and paid separately under respective item of BOQ)

(k) 72 hrs testing of treatment for water tightness by ponding of water. Note:- Shifting of cable during running of work will be included in quoted rate.

M&L for grouting by pressure injection with cement slurry of 50kg cement mixed with pidicrete SM -225 gms of M/S pidilite industries ltd or Cobex 100 of M/S Fosroc Chemicals as per instruction complete all as specified and directed.

M&L for providing cement concrete type B0 1:2:4 ( using 12.5mm graded stone aggregate) as in for padding of roof, parapets, roofkerbs, copings and the like including weathering, slightly rounded for chamfered angles, filleting/beching and throating, complete all as specified and directed.

M&L for 10 mm thick rendering in CM 1:4 on fair faces of bricks walls/concrete surface finished even and smooth without using extra cement including water proofing compound complete all as specified and directed. Note : Water proofing compound measured and paid seperately

S&F of rotational moulded polyethylene water storage tanks of 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Dismantling water tanks of capacity n.exc. 1000 ltrs capacity complete all as specified and directed.

Taking down chowkats or frames exc 1.50 Sqm but n.exc 4 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame) complete all as specified and directed.

Taking down shutters of any descripition exc 1sqm n exc 2sqm each complete all as specified and directed.

Taking down shutters of any descripition n exc 1 sqm each complete all as specified and directed.

Demolition of concrete in ground floors and pavings (un-reinforced) nexc 15 cm thickness (below or above ground level) complete all as specified and directed.

S&F mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

M&L for providing cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, copings an levelling concrete etc slightly rounded or chamfered angles and throating complete all as specified and directed.

S&F 2nd class HW for plain, solid, straight chowkat and framed, rough/ framed rebated on the solid, rounded, or chamfer, put together with glue pinned at joint, complete all as specified and directed.

S&F for powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat, channel etc for fixing etc. complete all as specified and directed.

S&F of 4.8mm thick plain sheet glass ordinary quality nexc 0.50Sqm in each pane complete all as specified and directed.

All as per item No. 39.00 above but exc 0.50Sqm in each pane.

S&F of stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F of 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F of 75mm long size butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F in repairs door closer hydraulically regulated, designation No 3, universal type, of aluminium extruded section body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F of 150 mm long aluminium handles, cast type, anodised fixed to shutters complete all as specified and directed.

S&F of 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F of 300mm aluminium sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed.

S&F of 40 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type with decorative laminated on both sides and fixed to chowkats complete all as specified and directed.

S&F of 2nd class HW factory made 35 mm thick glazed and skelton shutter, open rebated and prepared to receive glass, gauges, etc ( with or without sash bars) , edges of framing plain, chamfered or rounded, fitted with cut and mitreated beads for securing glass, etc fixed to chowkats complete all as specified and directed.

S&F of 35mm thick 2nd class HW rail and style plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F in repairs 300mm ordinary MS rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection finished even & smooth using extra cement complete all as specified and directed.

M&L for preparation of new wooden surfaces of any decription and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation old wooden surfaces of any decription and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for 3mm thick wall care putty on wall/ceiling complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron surface of any description and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil emulsion distemper over one coat of white cement based putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of oil emulsion distemper over one coat of white cement based putty complete all as specified and directed.

M&L for machine pressed precast concrete inter locking paver block (Reflective type) in any shape and size confirming to IS-15658-2006 of 60 mm thickness M-35 grade with grey cement and pigment complete all as specified and directed.

M&L for dry clean sand filling under floor/pavement or in foundation including watering and consolidation complete all as specified and directed.

S&F in repairs decorative stainless steel mild steel powder coated 25mm dia, minimum thickness 1mm curtain rod with one set of powder coated side fixing brackets, rings and decorative knobs complete all as specified and directed.

Cutting grooves in concrete/brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove by using wire netting of galvanised steel wire with cement mortar 1:3 complete all as specified & directed. Note :- Galvanised steel wire netting shall be measured and paid separately.

S&F of galvanised steel wire of mesh in size 12mm, 1.40mm nominal dia of wire and fixed with tinned tacks or galvanised wire staples complete all as specified & directed.

M&L for ShaliCryl ® 215 single component, UV resistant, unique elastomeric, high build exterior water proofing coating based on a revolutionary acrylic polymer with quick-set capabilities to resist moisture attack complete all as specified & directed with and including following activities:-

(a) Surface Preparation :- Remove all loose and foreign materials, if any, by a wash with a jet of air / water. Repair structural defects before application of ShaliCryl® 215. Fill voids and undulation area with Polymer Mortar made out of ShaliSBR Latex, Water, Cement and Sand in the ratio of 1:1:5:12.5. Fill cracks up to 3 mm with PlastiSeal and cracks over 3 mm with PlastiSeal P after opening the crack to a “V” cut. In case of any poor plaster surface in existence (for old building), remove the same and corrected with new cement : sand in the ratio of 1:4 admixed with ShaliPlast LW+ @ 200 ml / bag of cement.

(b) Primer Application :- Apply ShaliPrime WB as Primer after dilution with potable water in the ratio 1:0.5 for a theoretical Coverage 8-10 m2 / L of the mix and allow it to dry for 3 – 4 hrs. post elimination of undulation, roughness of concrete, joint marks, Voids and any other surface correction.

(c) Application of Material • Apply first coat of ShaliCryl® 215 over the primed surface @ 160 ml / m2 . Add maximum of 10% potable water by volume for the first coat only, if required, to have brushable consistency only. • Allow the applied coating to dry 6 – 8 hrs of application. • Apply second coat of ShaliCryl® 215 without dilution over dried first coat @ 140 ml / m2 and allow it to dry. • Do not undertake any further work over the coated area within 72 hrs of final coat. • A coat of 100 micron of ShaliCryl TC 100 will improve water / dust repellent property.

M&L for joint free glazed ceramic coloured tiles in vertical surfaces 450x350x7mm thick set and jointed in cement slurry over and including 10mm thick backcoat rendering in CM of 1:4 complete all as specifed and directed.

M&L for Non skid ceramic coloured tiles 7-8 mm thick (square / rectangular) area of each tile exc 0.11 sqm but not exc 0.18 sqm, in floor etc set and jointed in white or colour cement to match the surface of the tile complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 8-10 mm thick (square/ recangular) polished, area of each tiles exceeding, 0.42 sqm but not exceeding 1.00 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for 25mm thick PCC type B-1 1:2:4 (20mm graded stone aggregate) as in sub base of floor finished even & rough complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer for laying floor finish in CM 1:4 complete all as specified & directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F of 40 mm thick flush shutters, solid core construction, with block board core and ply wood face panels, commercial type with decorative laminated on both sides complete and fixed to chowkats all as specified and directed.

S&F of wash basin mixutre, centre hole, mixing hot & cold water, fancy type, cast copper alloy, chromium plated with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe etc for 15mm bore and fixed in repairs complete all as specified and directed. Cat No: 5001B Make: Jaquar or equivalent as approved by GE

S&F in repair brass cromium plated wall mixer for mixing hot and cold water screwed down for iron pipe of 15mm bore and fixed complete all as specified and directed.

S&F of handshower (health faucet) with 8mm dia, 1 meter long flexible tube and wall hook and fixed in repairs complete all as specified & directed. Cat No- 573 Make: Jaquar or equivalent as approved by GE.

S&F of chromium plated grating doom 100 mm dia with waste hole complete all as specified and directed.

S&F of PVC connection 15mm size with PTMT nuts of length 750 mm fixing complete all as specified and directed.

S&F of 15 mm bore stopcock cast copper alloy, screwed down high pressure chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F of 15 mm bore bib taps fancy type cast copper alloy, screwed down high pressure chromium plated screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs of vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F of PVC low level flushing cistern of 10 litres capacity with all internal fittings incl flush pipe and fixing to supply pipe complete all as specified and directed.

S&F of wash hand basin, vitreous china (flat back or angle back type) of size 550mm x 400mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F of PVC flexible waste pipe 32 mm dia with socket for steel sink upto floor level and length not less than 0.60 M complete all as specified and directed.

M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement of 75mm bore complete all as specified and direcetd.

S&F for PVC (SWR) pipes 75 mm bore single socketed in any length with rubber rings joints laid in floors/fixed to walls complete all as specified and directed.

S&F for PVC(SWR) bend of bore 75 mm complete all as specified and directed.

S&F for PVC(SWR) branch piece single (Y) equal or unequal bend of bore 75 mm complete all as specified and directed.

S&F for PVC(SWR) junction single (single 'T') equal or unequal of the following bore 75 mm complete all as specified and directed.

S&F for PVC(SWR) vent cowl of bore 75mm complete all as specified & directed.

M&L for water proofing treatment for sunken surfaces of slab in following sequence complete all as specified and directed:- (a) Slope erection providing PCC 1:1.5:3 using 12.5 graded stone aggregate, average thickness 25mm, mixed graded stone aggregate, average thicknss 25mm, mixed with integral water proofing compound "DITCHTMENT DM" manufactured by Dr. Fixit Pdiproof LW+ of M/s Pidilite Industries or STP No 01 (Liqud) of M/s STP Ltd as approved by GE, in propotions as suggested by manufacturer. (b) Applying evenly a priming coat of bituminous primer conforming to IS : 3384 @ 0.7 Kg per sqm on prepared surfaces. (c) Applying evenly a coat of hot blown bitumen of grade 85/25 @ 1.5 kg/sqm on the primed surfaces. (d) Laying of 150 micron thick black polyethylene film on the surface with 10mm overlaps sealed and bounded the surface. (e) Applying evenly a coat of hot blown bitumen of grade 85/25 @ 1.5 kg/sqm on the surface. (f) Conduct of 48 hrs testing of treatment for water tightness by ponding of water.

S&F for pre-painted galvalume aluminium zinc coating GI based corrrugated steel sheet 0.50 mm thick of any color having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self-tapping screws on angle iron frame of each side complete all as specified & directed.

All as per item No. 91.00 but plain sheet.

S&F of mild steel rolled section/tubular sections in purlins, cross, beam, rafter,posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-W (Gde E-250) quality-B complete all as specified and directed.

M&L for providing textured exterior emulsion paint of required shade over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.

M&L for providing and fixing stainless steel (Gde 304) railing made of hollow tubes, channels, plates etc., incl welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts including fixing the railing with necessary accessories and stainless steel botls etc., of required size on the top of the floor or the size of waist slab with suitable arrangement complete all as specified and directed.

M&L for 20-22 mm thick machine cut kota stone slab flooring with Kota stone not less then 550mm X 550mm size, laid over cement screed of 15mm thick in CM 1:4 laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbings & mirror polioshing in to match existing complete all as specified and directed.

S&F of 12 mm thick toughen glass as in doors, partitions or other similar works in approved shape and design with necessary steel fittings and fixtures including 300 mm long one stainless steel handles fixed in both sides of door shutter, locks fixed with wall /ceiling/ floors, floor springs etc complete all as specified and directed. Make : Steel fittings and fixtures shall be Ebco/Hettich Saint Gobain

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground (posts embedded in concrete, brick work, masonry work, etc.) complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Excavation in post holes each not exc 0.50 cum getting out, in soft rock complete all as specified and directed.

All as per item No. 100.00 above but in soft/loose soil.

M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete or in boundary pillars and posts etc complete all as specified and directed.

M&L for mild steel section in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including, bolting or riveting, etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only of chain link MS galvanised fencing any mesh size and any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply only of chain link mild steel galvanised fencing PVC coated any mesh size and any type of standards, rails, straining bolts, etc. complete all as specified and directed.

S&F of 10 to 15mm dia mild steel screw bolts (machine made) with square or hexagonal heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and hexagonal or square nuts, length of bolt exc 5cm but n.exc 10cm long fixed completed all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length and bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for preparation of new steel surfaces of any description n exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for brick work with fly ash modular bricks in CM 1:6 straight or curved on plan to any radius complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of cement based paint complete all as specified and directed.

S&F in repair galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and including provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material (soil) not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Surface excavation not exc 30 cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide and n exc 1.5 m in depth beyond; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes etc n exc 10 sqm on plan and not 1.5 m depth and getting out hard/dense soil complete all as specified & directed.

M&L for PCC 1:4:8 (using 40 mm graded stone agg) type D2 as in foundation and sub base etc complete all as specified and directed.

M&L for filling moorum/red bajri in floors or paving, laid in layers n exc 15 cm thick, spread, levelled and blinded with earth and rammed including watering complete all as specified and directed.

M&L for hard core of broken stone or boulders of gauge n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick wateed and rammed to a true surface complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 using modular bricks complete all as specified and directed.

M&L for 40mm thick plain cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in DPC and similar work complete all as specified and directed

S&F in repairs vitreous china urinal half stall type, white with union for discharge pipe including waste pipe and urinal spreader of 15mm dia pipe and fixed complete all as specified and directed.

M&L for granite 18-20 mm thick (of any colour/type) work (table rubbed and polished) in steps, jambs, pillars, window cills cooking plateform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite including grinding, moulding and polishing complete all as specified and directed.

S&F of PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube suppling & fixing in opening as per specification & drawing complete all as specified and directed.

S&F of 100mm size stainless steel hinges and fixed to frames complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30 mm thick (style), consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet stip of 20 mm width and plain colour PVC sheets for top raill, lock rail & bottom rail on eitgher side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame complete all as specified and directed.

S&F of PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F of PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

S&F of 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 sqm in each pane complete all as specified and directed.

S&F of 15 mm stop valves, cast copper alloy, chromium plated screwed down high pressure, with capstan head, scrwed both ends for iron pipe or for unions and fixing complete all as specified and directed.

M&L for concrete bed of PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) for 150 mm dia drain pipes including bedding & hunching complete after pipes are laid, jointed and tested complete as specified and directed.

S&F of RCC NP-2 pipe laid in trenches and jointed in CM 1:1 including testing of 150 mm bore pipe grade ‘A’ complete all as specified and directed.

M&L for cutting/filling into existing manholes for connecting new sewage line 150 mm bore including making good to disturbed benching and haunching, plaster etc and forming new branch channel ( ½ round of ¾ section) if required in cement concrete 1:2:4 type B1 and smooth finished, reforming benching as required and as directed for internal dia fo pipe complete allas specified and directed. (Each Man hole shall be measured under this item )

M&L for RCC (nominal mix) 1:11/2:3 type B-1 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. (Note : Reinforcement shall be measured and paid separately)

M&L for formwork to side and soffits of beams, lintels etc for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for TMT bars 8 mm dia, cut to length and bent to shape required, including cranking, bending spirally for hooping for side wall columns, hooking ends and binding with and including mild steel wire (annealed) not less 0.9 mm dia as in stirrups, spacers, binders etc complete all as specified and directed.

S&F of sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exe 0.06 Sqm but n exc 0.11 Sqm as in floors etc; set and jointed in cement slurry and pointed with white or coloured cement to match complete all as specified and directed.

M&L for marble work 18-20 mm thick (Makrana white) (table rubbed and polished/ moulding) as in steps, jambs, pillars, window cills, cooking platforms and like over 15mm screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed.

M&L for Endura joint free colour tiles 8 to 10 mm thick (square/rectangular) area of each tiles not exceeding 0.11 sqm as in floors etc; set and jointed in neat cement slurry and pointed in white or coloured cement to match shade of tiles complete all as specified and directed. Make Johnson endura or equivalent make as approved by GE.

S&F in repair to stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed to frames complete all as specified and directed.

Dismantling asbestos cement (Corrugated, semi corrugated, etc) sheets including ridges in roof covering complete all as specified and directed.

Dismantling timber in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section in unframed work complete all as specified and directed.

S&F of mild steel work in tubular trusses including special shaped washer etc. using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St-240 complete all as specified and directed.

S&F of 5mm thick looking mirror of approved quality with wooden back and edge, complete polished and fixed in repairs complete all as specified and directed.

S&F of 20 mm dia ball valve PTMT, high pressure with polythene float and fly nut, screwed for iron pipe with epoxy coated aluminium rod complete all as specified and directed.

S&F of 18mm plywood grade BWR, type BB fixed with screws to timber frame work complete all as specified and directed.

S&F of 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturers instructions complete all as specified and directed.

S&F to aluminium (extruded section body) door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

M&L for Cabinet hinges soft close functioning of SS 8 crank complete all as specified and directed.

S&F of 105mm x 60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. made out of 1.25mm thick mild steel sheet complete all as specified and directed.

S&F of 125mm x 60 mm pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate, etc. made out of 1.25mm thick mild steel sheet complete all as specified and directed.

S&F of Soap dish holder complete all as specified and directed. Make Jaquar Cat No 1131N or equivalent as approved by GE

S&F of Towel ring complete all as specified and directed. Make Jaquar Cat No 1121N or equivalent as approved by GE

S&F of bib cock two way with flange, cast copper alloy, fancy type, chromium plated screwed down for iron pipe 15mm bore and fixed in repairs complete all as specified and directed. Cat No: 5041 Make : Jaquar or equivalent as approved by GE

S&F of Towel rack 24 inches long with hanger, chromium plated & fixed complete all as specified and directed. Cat No 35781 Make: Jaquar or equivalent as approved by GE

S&F of Toilet paper holder chromium plated recessed type & fixed complete all as specified and directed. Cat No 35751 Make: Jaquar or equivalent as approved by GE.

S&F of PVC connection 15mm size with PTMT nuts of length 600 mm fixing complete all as specified and directed.

S&F in repairs 15mm wall mixture, cast copper alloy, chromium plated with provision for bath telephone shower and overhead shower complete all as specified and directed. Make. Prayag or Jaquar or equivalent as approved by GE.

S&F of glass shelf assembly consisting of 8 mm thick sheet glass shelf with CP brackets guard and railing 500 mm size complete all as specified and directed.

S&F of corner glass shelf assembly consisting of 8 mm thick sheet glass shelf with CP brackets guard and railing 300 mm size complete all as specified and directed.

S&F of overhead square shower with rubit cleaning system 150mmx150mm, brass chromium plated complete all as specified and directed. Make :- JAQUAR( Cat No OHS -354495) or equivalent as approved by GE

S&F in repairs stainless steel sink, 1.00mm thick for kitchen, with plug, washers and wastes/coupling, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm with bowl size 410mmx 330mmx 160mm fixed complete all as specified and directed.

S&F of tubular towel rail chromium plated 20 mm dia D type 60 cm long between flanges complete all as specified and directed.

S&F of butt hinges 100mm long, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F of 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

M&L for 15 mm thick rendering in CM 1:3 on fair face of brick/concrete surface in ceiling complete all as specified and directed.

S&F in repairs 15 mm pillar taps cast copper alloy, with capstain head chromium plated screw down high pressure, with or without lettered HOT or Cold with long shanks and fly-nuts screwed for iron pipes and fixed incl necessary small fittings complete all as specified and directed.

S&F in repairs plastic water closet seat cover, any colour except black, closed pattern with flat bottom, and mild steel chromium plated for aluminised hinging device complete all as specified and directed.

S&F in repairs glass shelf (with bracket) 22 inch long chromium plated and fixed complete all as specified and directed.

M&L for preparation of new plastered surface wall and applying 1st quality acrylic distemper (ready mixed) with two or more coats on new work having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour applied as per manufacturer's specification complete all as specified and directed.

M&L for preparation of new plastered surface wall and applying finishing coat with acrylic smooth exterior emulsion paint of required shade of two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.

M&L for formwork to chajjas, troughs and similar items including edges for rough finished flat surfaces complete all as specified and directed.

M&L for grouting of permanent bonding of strutural damage/crack, porosity of concrete to attend leakage/seepage with pressure grouting with 15mm bore GI pipe nozzle under the pressure of 5 kg/sqcm using cement based grout, treatment to be made as per manufacturer instructions complete all as specified and directed.

Dismantling wall and ceiling boards of any description fixed in any position, any thickness including cover fillets complete all as specified and directed.

S&F of galvanised cold rolled steel section in framed work of 600x600mm grid size 24x38x0.60mm Tee (bottom precoated) and 24x24x0.50mm thick wall angle galvanised cold rolled steel section incl expansions fasteners as in ceiling complete all as specified and directed. (Make : Gabson or equivalent as approved by GE)

S&F of 6mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600x600mm grid complete all as specified and directed. (Note: Frame work for ceiling shall be measured and paid separately)

M&L for preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for removal of old decorated wall surfaces and applying two coats of exterior acrylic emulsion weather coat paint, white or tinted including preparation over and including one coat of white cement based putty (where it is required) complete all as specified and directed. [Make:- Apex Paint of M/s Asian Paints or equivalent in M/s Berger or M/s ICI as approved by GE]

Deduct Schedule of credit (calculation will be done off line) Rs. 76401.00

M/s VIKAS TRADERS

R K Sales

Jyoti enterprises

Samaksh Enterprises

Vee kay construction

RAJPATI CONSTRUCTION