Replacement of broken/crooked poles/lines from time to time in 11 KV/LT lines emanating from various 33/11 KV sub-stations under the jurisdiction of Sub-division-I/II and III, Modinagar under Electricity Distribution Division Modinagar.

Amount

Carrage of fallowings from ESC to JE state on kachcha pacaa road including loading and unloading at both ends requried for proper completion of work, distance about to 40kms.

S.T Pole 13 Mtr long.

S.T Pole 11 Mtr long.

P.C.C Pole 8.5 Mtr. Long

Carriage of All line Material from store to j.e store Sub station as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Carriage of fallowings from ESC. to pit site on kachcha pacaa road including loading and unloading chagres at both ends, rcquricd for proper completion of work, distance about to 40 Kms

S.T Pole 13 Mtr long.

S.T Pole 11 Mtr long.

P.C.C Pole 8.5 Mtr. Long

Carriage of All line Material from store center to j.e store Sub station as ACSR Weasel conductor, ABC conductor GI Wire, Earth Wire. M.S. Chanel, Angle, Stay & Earthig Rods, Barbed Wire. Disc Insulator etc.

Erection of Single support including complete 1 IT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Single support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Erection of Double pole support including complete HT fittings as per RESPO manual and as per direction of Engineer in charge including the cost of labour, T&P and carrier etc. required for proper completion of work.

Grouting of Double pole support shall be grouted with cement, sand and birck ballast/stone ballast in ratio 1:4:8 =30x3030 cms. including the cost of cement, sand, birck ballast/stone ballast, etc. as per actual size requirement, as per RESPO manual and as per direction of Engineer in charge including the cost of labour,

Laying, sagging. Stringing and binding and jumpering of ACSR Weasel conductor on newly erected pole as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

Laying, sagging. Stringing of 11 Kv XLPE cable 3*70 Square MM e as per RESPO manual and as per direction of supervising engineer. It includes the cost of labour, T&P, carrier etc. requried for proper completion of work.

Fixing of stay rod with stay wire in proper way with nozelling

Grounting of stay rods

resagging of loose and bad sag of L.T/H.T Line

Tightening of stay

Grounting of P.C.C/STP Pole Old

Change of broken/damaged/missing following items

Disc insulator

Pin insulator

Bolt & Nut off size.

Bended X-Arm/Angle/Channel

Ailment of PCC/STP Pole

L T/F/holding Clamps

Stay Clamps

Stay Insulators.

The folloing material is required to be supplied by the contractor.

Stay Insulators.

Stay Clamps

Holding Clamps.

L T Clamps.

L T Insulator

F Clamps.

Bolt & Nut off size.

Vivek Electricals

NEHA ENTERPRISES