KAM(R)/GRC/SOPD(G)/2019-20/07.

Amount

Roads Works

Dismantling of Structures (Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material,disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 metres) Brick Tiles work in cement morer

Excavation in Soil by Manual Means. (a)(Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto1000 metres.)

Removal of Unserviceable Soil with Disposal upto 1000 metres (Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead but excluding replacement by suitable soil which shall be paid separately as per clause 305

Cleaning and de-silting road side drains/cross drains etc. by mechanical means with adequate road safety measures by providing caution boards/safety ribbons/proper barricading where necessary/proper lighting if necessary etc. without damaging the foot paths/slabs/road surfaces etc.including immediate disposal of semi liquid/silt/garbage/floating materials/polythin etc. taken out from the drain/culverts etc. upto a lead of 20.00 km from the site within 24 hours as directed keeping the road surface /footpath etc. clean and as directed by the department. De-siltation work will have to be carried out as and when necessary as directed by the Engineer-in-charge.(Measurement shall be taken on inside of the drain wall)

R C C Drain with load bearing slab, RCC Culvert etc.

Providing stone brick soling in earthen shoulder with stone/ best quality jhama brick, sand packed and laid to true line and level and in panel after preparing the subgrade including earth work in excavation as directed including all labour and materials and if necessary dewatering, complete. (Bricks on flat soiling)

Plain/Reinforced cement concrete, in open foundation complete as per drawing and technical specification including steel shuttering formwork. PCC Grade M-15

Supplying, fitting and placing TMT IS:1786 (fe 500) bar reinforcement in substructure complete as per drawing and Technical Specifications (b) TMT IS 1786 (fe500D) Secondary produceer ISI approved

Plain/Reinforced cement concrete, in sub structure complete as per drawing and technical specification and steel shuttering formwork. With Concrete mixer , RCC Grade M 20

Providing weep holes in Brick masonry/Plain/Reinforced concrete abutment, wing wall/return wall with 100 mm dia AC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical specification.

Back filling behind abutment , wing wall and return wall complete as per Drawing and technical specification B. Sandy material

SWARAJ INFRA