REPAIR MAINT TO JOINERY AND CERTAIN OTHER WORKS AT OTM ACCN UNDER ZONE B AT MIL STN GAYA

Amount

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each.

Taking down chowkat or frame with shutter (without taking off shutters from the frames) area exceeding 1.5 Sq mtr but not exceeding 4 Sq mtr each

Taking down Shutter of any description area exc. 1 sqm and not exc . 2 sqm each

S&F aluminum frame powder coated for doors, windows, ventilators with one or more rebates including jointing cleat for fixing etc. complete all as specified and directed.

S&F anodised aluminium door shutter with powder coating (minimum thickness of powder coating 50 micron) aluminium sections weighing not less than 1.0 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, anodised aluminium hinges, snap beading, screws,etc complete all as specified

S&F any colour, aluminum window and ventilator shutters, powder coated sliding/side hung type with sash bars, aluminium section weighing not less than 0.55 Kg/ Sqm including necessary jointing cleats, glazing clips, ruber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

S&F anodised aluminium grills (anodised transparent or dyed to required shade according to IS:1868 with anodic coating grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre, including cuttung the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all as per requirement and direction of Engineer-in-Charge.

S & F 100 mm long mortice latch with two levers (vertical type), mild steel body complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples or screw complete all as specified and directed.

S&F Sheet glass 5.5 mm thickness, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane

M&L 6 mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination fixed with screws/beading to timber/aluminium frame work or as required on site including fixing arrangement complete all as specified

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.

S&F Solid PVC factory made Door shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as pere specification and drawing.

S & F aluminium handles, cast type, D shape anodised of size 150mm.

S&F 100 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed.

S & F 200 mm long aluminium anodised barrel tower bolt of extruded section complete.

S&F in repair aluminium (die cast body) door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg complete all as specified as directed.

S & F in repair 20mm bore cut to length as required stainless steel decorative draphery rods with brackets and decorative finails as required colour complete all as specified and directed.

Hacking out old broken glass(any thickness, size, quality or description) from wooden/steel frames, glazed with putty or fixed with beads.

S&F 4mm thick sheet glass, pin head type and glazing with oil putty in a square n exc 0.5 Sq m in each pane (to be fixed upto four storey of bldgs)

S&F 4mm thick figured glass, pin head type and glazing with oil putty in a square n exc 0.5 Sq m in each pane (to be fixed upto four storey of bldgs)

S&F in repair galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples or screw complete all as specified and directed.

Dismantling of wall and ceiling boards, any thickness including cover fillets complete.

M & L for anodised aluminium snap grid frame work of size 600mm X 600mm for false ceiling incl hanging to plastered surfaces/iron framework using suspenders et complete all as specified and as directed.

S&F 4mm thick HSPC non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling.

S&F in repairs4mm thick HSPC non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws as in ceiling.

S & F sandwiched hollow PVC wall Lining/panelling consisting of 5mm thick Plain designer colour PVC sheet but single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on wall/PVC frame etc complete all as per specified and directed.

Refixing repair work of existing defective aluminium door, window, ventileter with and incuding necessary fitting with and including making good as per site requirment as directed by Engr-in-charge.

S&F Powder coated aluminium frame/shutters for doors, windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Note : (i) Glazing and wire mesh shall be measured and paid separetely. (ii) Item shall be paid as per weight of aluminium section. (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arrangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

S & F in repair only rubber beading for repairing of existing door shutter

S & F of taper clips, tee, angles and other items for aluminium door complete.

S & F in repair double legged door stopper of aluminium alloy body with rubber all as specified and directed.

S & F in repair Steel locking bolts with mild steel electro galvanised plate and bright bolt not less than 10mm dia 100mm size complete all as specified and directed.

S & F radiant door bottom sealing strip guard for doors complete all as all as specified and directed.

M/s Vinay Kumar (BID ID -3385183)

MS HARI MOHAN GUPTA (BID ID -3376629)

M/S V D ASSOCIATES (BID ID -3376640)