Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹30.2 LAccepted-AOC | L-1 | Accepted-AOC Lowest Bidder | |
| 2 | L-2₹30.6 L+₹40,920.70 (1.36%)Rejected-Finance | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹32.2 L+₹2.0 L (6.63%)Rejected-Finance | L-3 | Rejected-Finance Other than lowest bidder | |
| 4 | L-4₹33.8 L+₹3.6 L (12.0%)Rejected-Finance | L-4 | Rejected-Finance Other than lowest bidder | |
| 5 | L-5₹35.3 L+₹5.1 L (16.8%)Rejected-Finance | L-5 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹99,800
Closing Date
9 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
REPAIRS TO FOOTPATH, KERB STONE, DRAIN, ROOF, SHAFT AND CHAJJA ALONG WITH CONNECTED ITEMS IN ZONE A AND ZONE B AT SUNJUWAN UNDER GE JAMMU
2022_MES_568776_1
GEJC-55/2022-23
Open Tender
Civil Works
Item Rate
240 days
AOR of GE Jammu
Please refer Tender Documents
9 documents required · 9 mandatory
₹500
GE Jammu
₹99,800
Yes
4 Feb 2023
13 Dec 2022
11 Jan 2023
13 Dec 2022
9 Jan 2023
27 Dec 2022
Amount
Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water and removing unserviceable material outside cantt area complete all as specified and directed by Engineer-in-Charge. Note: - Plaster work may be in patches upto triple storey.
Material and labour cutting channels, grooves / RCC walls of chajja / facia or rebates not exceeding 15 cm girth, with reinforcement and trimming surface complete all as specified and directed.
Material and labour rendering 20 mm thick (average) in cement mortar (1:4) on concrete surface such as chajjas, upward fascias and similar items including two or more dubbing coats with top layer of water proofing compound, surface finished even and fair without using extra cement upto height of three storeyed building with all necessary formwork, scaffolding, lifting arrangement for external surface complete all as specified and directed by Engineer-in-Charge.
Material and labour for applying one coat of 1.00mm thick wall care putty on wall and finished smooth the surfaces complete all as specified and directed (upto height of three storeyed building).
Material and labour for brick work with sub class 'B' bricks straight or curved on plan 6 metre mean radius built in cement mortar (1:4) complete all as specified and directed.
Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
Material and labour for rendering 15 mm thick in cement mortar (1:4), finished even and smooth without using extra cement (external plaster) with water proofing compound (upto height of three storeyed building) complete all as specified and directed. Note: - Water proofing compound shall be paid separately.
Material and labour for rendering 5 mm thick in cement mortar (1:3) on fair faces of concrete surface of ceiling, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Material and labour for applying three coats of white wash on ceiling including preparation of newly plastered surface complete all as specified and directed.
Material and labour for applying two coats of wheather proof paint exterior grade (Apex Ultima) including all scaffolding arrangement up to four storeyed building complete all as specified and directed (upto height of three storeyed building).
Material and labour for applying two coats of cement based paint including preparation of new plastered surface complete all as specified and directed.
Material and labour for applying one coat of cement based paint including preparation of old plastered surface complete all as specified and directed.
Material and labour for preparation of old steel surfaces of any description not otherwise described over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.
Hacking out old broken glass of any thickness, size, quality or description from the wooden / steel frames glazing with putty or fixed with wooden beads complete all as specified and directed.
Supply and fixing 3mm thick ordinary glass sheet quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, including scaffolding to reach up to 4 storey building complete all as specified and directed.
Description all as per serial item No 15.00 here-in-before but frosted glass complete all as specified and directed.
Removing existing treatment from roof surfaces such as tiling, tarfelt, fungus moss, dust etc cleaning the RCC roof surface wire brushing complete all as specified and directed.
Material and labour for rendering 20 mm thick in cement mortar (1:4) on concrete surfaces (on roof slab) finished even and smooth without using extra cement, mixing liquid water proofing compound complete all as specified and directed. Note: - Liquid water proofing compound shall be measured and paid separately.
Cleaning and removing loose / dirt materials from the roof surfaces and applying bitumen primer @ 0.30 litre / Sqm, providing and laying 3mm thick APP modified water proofing membrane weighing not less than 3.5 kg / Sqm reinforced with non woven polyester mat weighing not less than 160 gm / Sqm, having softening point not less than 800 N / Sq cm, tearing strength of 180 N, with minimum of 10 cm side laps and 15 cm end laps, laying by application of torch complete all as specified and directed.
Material and labour for two coats of aluminium paint over APP membrane complete all as specified and directed.
Supply only integral water proofing compound complete all as specified and directed.
Taking down 15 mm bore galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Taking down 20 mm bore galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Supply and fixing 15 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and directed.
Supply and fixing 20 mm bore medium grade galvanized steel water tubing with all fittings fixed complete to walls and ceilings or laid on floors complete all as specified and directed.
Refixing old steel tubing and connections in new or old position of 15 mm bore of pipe (walls, ceiling or floor etc) complete all as specified and directed.
Complete removal of vegetations, roots and shrubs from wall and making good the wall with cement, brick work and plastering including all scaffolding up to 4 storey building complete all as specified and directed.
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.
Material and labour for 100 mm thick cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) complete all as specified and directed.
Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor / plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85 / 25 or 80 / 100 grade and three parts of sand (all by weight) complete all as specified and directed.
Material and labour for disconnecting existing tanks of capacity exceeding 500 litres but not exceeding 1000 litres, setting aside for repairs, cleaning etc and hoisting if required reconnecting and refixing in position after cleaning and removing all scale dirt etc from tanks complete all as directed at site and writing date of cleaning with synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Dismantling PVC water storage tanks of capacity upto 1000 litres complete all as specified and directed.
Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified in SSR Part - I.
Supply and fixing rotational moulded polyethylene water storage tank including plastic lid cover, double layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 litres including making connections, 20 mm dia ball valves high pressure PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gram) complete all as specified and directed in SSR Part - I.
Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed.
Supply and fixing in repair 110 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and directed.
Supply and fixing in repair 75 mm dia bore PVC (SWR) pipes single socketed in any length with solvent cement joints, fixed to wall complete all as specified and directed.
Supply and fixing in repairs PVC (SWR) bends of bore 110mm dia complete all as specified and directed.
Supply and fixing in repairs PVC (SWR) bends of bore 75 mm dia complete all as specified and directed.
Dismantling stone slabs laid dry and tiles of any description or thickness in floors, aprons etc. and rubbish off the premises complete all as specified and directed.
Material and labour 75 mm thick PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in floor as sub base complete all as specified and directed.
Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size / shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not be more than 5 mm), including making drainage opening wherever required complete all as specified and directed.
Material and labour for preparation of new surfaces of any description exceeding 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engr-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.
M/S RAVINDER SINGH
M/S VED PAUL MAHAJAN
M/S MANJIT SINGH AND SONS
M/S CHOUDHARY BUILDERS
ASHFAQ AHMED MANHAS
M/S TRIKUTA BUILDERS
M/S Shesh Paul Gupta
V K CONSTRUCTION CO
Bidder Name
M/S Shesh Paul Gupta
M/S VED PAUL MAHAJAN
M/S TRIKUTA BUILDERS
M/S RAVINDER SINGH
ASHFAQ AHMED MANHAS
M/S MANJIT SINGH AND SONS
M/S PRITHIVI RAJ AND SONS
M/S CHOUDHARY BUILDERS
V K CONSTRUCTION CO
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .