WBSIDCL/48 Elec of 2025-26 Sl 2

Horizontal type multistage, centrifugal, split casing pump of cast iron body and bronze impeller with SS shaft, to ensure minimum pressure of 3.5 Kg/Sqcm at the highest and farthest outlet at a flow 2850 LPM & 100 m head confirming to IS-1520 with mechanical seals, safety relief valve, pressure gauges on delivery and suction side, drain and bypass arrangement for testing of pump complete in all respect.

Heat Exchanger cooled diesel engine developing required BHP at 1500 RPM for the pump, flexible coupling & coupling guard with the pump & common bed plate for mounting of engine & pump shall confirming to relevant BS/IS standard with auto starting mehanism. The common base frame shall be held by bolts grouted in the concrete including foundation bolts, washers as required, vibration damping arrangement by cushy foot & engine panel with battery charger provided by engine manufacturer, connection to engine starting panel, lead acid batteries of 12V/24V, 180AH with casing, lugs, stand & terminations to diesel engine, charger complete in all respect.

Exhaust pipe of required length (discharge to leave above roof level as per standard) with 50mm thick glasswool pipe section, covered with aluminum cladding, residential silencer muffler, instruments & protection-stop selenoid for auto stop in the event of fault with auto indications, day oil tank of 200 ltrs with first charge of diesel fabricated out of 4mm MS sheet with inlet/ outlet ON/OFF valves, level indicator, drain pipe, 15mm dia MS fuel line complete as reqd. Common bed plate of fabricated MS channel/ ISMB with vibration isolator. The base frame shall be held by bolts grouted in the suitable cement concrete foundation duly plastered including foundation bolts, washers as required

Make: Kirloskar Model: Pump Set DSM 125/40(MOC:43) Coupled With 127 HP 1500 RPM RC Engine along with Accessories (BASE FRAME COUPLING COUPLING GUARD FOUNDATION NUTS SBOLTS) Head-100 Meters Discharge-2850LPM

Pump and Engine should be 5 (five) years warranty including Factory fitted certificate.

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :(TATA/ JINDAL or equiv as appd by EIC)

200 mm dia

150 mm dia

100 mm dia

80 mm dia

50 mm dia

25 mm dia

Supplying, fixing, testing and commissioning of C.I. butterfly valve of PN 1.6 rating duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : (Make Kartar/Koley or equiv as appd by EIC)

Providing, installation, testing and commissioning of Dual plate non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : (Make Kartar or equiv as appd by EIC)

150 mm Dia

Supply, Fabrication, Fixing and fitting of angle iron frame fabricated from MS angle including MS base plate for supporting the Exhaust System of the Diesel Engine & installaion of battery & Battery charger as required with all necessary welding & fabrication. the structure shall be proper welding as per instruction of E.I.C including painting as directed by E.I.C

Providing of Cu armoured control cable including laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. (Make - Polycab or equ as appd by EIC)

12C X 1.5 sq mm

3C X 1.5 sq mm