GE/S(U)-26/2021-22 WELCOME MAINT FOR NCSR 2 COY NCSR CMDC 10 EW BN 1 EW BDE 135 (I) FD WKSP 9 R AND O HELIPAD COLONY NSOI SPORTS COMPLEX 250 TRANSIT CAMP BIKRAM PARK TARAMOUNT CP COLONY COMD CAMP OF HQ NC UNDER AGE B/R-II GE (SOUTH) UDHAMPUR

Amount

Preparation of plastered or unplastered old decorated wall surfaces and applying one coat of white wash complete all as specified and directed.

Preparation of plastered or unplastered old decorated wall surfaces and applying two coat of white wash complete all as specified and directed.

Preparation of old wall surfaces with washing, rubbing down and stopping of distempered wall surfaces and applying one coat of OBD, white/ coloured complete all as specified and directed.

All as per ser item No 1 above but one coat of white wash on ceiling surfaces complete all as specified and directed.

Preparation of old decorative surface of wall and applying one coat of plastic emulsion paint white/coloured complete all as specified and directed.

Preparation of old decorative surface of wall and applying two coat of plastic emulsion paint white/coloured complete all as specified and directed.

Applying one coat of cement base paint on old external wall surface up to G+2 floor height, including preparation of surfaces complete all as specified and directed.

Preparation of old painted wooden surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Complete removal of existing treatment (using removal machine) including preparing surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX or equivalent) over a coat of wall care putty up to G+2 floor height etc complete all as specified and directed.

Preparing surfaces of wall and applying one coats of weather proof exterior emulsion paint (APEX or equivalent) up to G+2 floor height etc complete all as specified and directed.

Preparation of old decoarated wall surface and applying one coat of wall care putty (Make: Birla or equivalent) up to G+2 floor height complete all as specified and directed.

Preparation of old decoarated ceiling surface and applying one coat of wall care putty (Make: Birla or equivalent) up to G+2 floor height complete all as specified and directed.

Preparation of old surfaces of any description over 10 cm in width of grith and applying two coat of varnishing complete all as specified and directed.

French polishing on wooden surface of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old decorative surface complete all as specified and directed.

Preparation of surface and applying textured painting (granular or impression type), any colour and any position complete all as specified and directed by Engineer-in-Charge.

Grinding and polishing (of any type) including pointing old marble surface/ kota stone of any description with white cement with admixture of pigmant to match with marble shad complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets complete all as specified and directed.

Providing false ceiling GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flages of 20 to 30 mm and web of 27 mm fixed to surrounding wall using screws at 452 mm C/C channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm C/c with GI cleat and steel expansion or suitable hanging from soffits\trusses\ bracking supporting hanger compressing of GI wire complete all as sepcified and directed by Engr-in-Charge.

4 mm thick 600 x 600 mm size asbestos cement plain E-boards designer ceiling (Make: Everest of equvalent), fixed to GI grid work with screws and applying new surfaces two coat of distempers and one coat of primers complete all as specified and directed.

10-12 mm thick gypsum boards seemess false ceiling as in ceiling plain, moisture resistant, including GI hanging wires & frames with intermediate, perimeter channel ceiling channel, along nuts and bolts connecting plates gypsum boards, dry wall screws soffits cleats, ceiling section, rowel plugs fixtures and screws and applying two coats of plastic emulsion paint over a coat primer on exposed surface complete all as specified and directed by Engr-in-Charge. Note : (a) Design of ceiling board as approved by Engr-in-Charge. (b) GI grid/hanging system shall be of the same make as of false ceiling manufacturer.

Demolition of cement concrete in ground floor and paving not exceeding 15 cm thickness below and above ground level complete all as specified and directed.

75 mm thick PCC 1:4:8 type D-2 (using 40 mm graded aggregate) as in sub base of floor etc. complete all as specified and directed.

25 mm thick PCC 1:2:4 type B-1 (using 20 mm graded aggregate) as in level course on floor etc. complete all as specified and directed.

15 mm thick screed bed in cement mortar 1:6 for laying floor finishes under floor complete all as specified and directed.

Non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Vitrified (Double Charge) tiles, area of each tile not exceeding 0.36 sqm, 10 mm thick (square or rectangular) of superior quality as in floor surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

All as per ser item No 27 above but in vertical surfaces such as skirting/ dado etc complete all as specified and directed.

Vitrified coloured heavy duty (Dura stone) 300 x 300 x 10 mm thick tiles as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing including rubbish off premises complete all as specified and directed.

Rendering 10 mm thick on fair faces of brick work or concrete surface in CM 1:4 on vertical surfaces/backing coat complete all as specified and directed.

Glazed ceramic coloured tiles of size 300 mm x 200 mm x 7 mm thick, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

Glazed ceramic coloured tiles of size 600 x 300 x 7-8 mm wall tiles set and jointed in neat cement and pointed in white/coloured cement to match with the colour of tile etc complete all as specified and directed.

20 mm thick granite (of any type) machine cut as in counter top and dado etc laid over cement backing coat and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grainding and polishing complete all as specified and directed by Engr-in-Charge.

50 mm thick PCC type C-1 1:3:6 (using 20 mm graded crushed stone aggregate) as in plinth protection laid in alternate pannels finished even and smooth without using extra cement complete all as specified and directed.

Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water built in cement mortar complete all as specified and directed.

Rendering 15 mm thick in CM 1:6 on fair faces of brick/concrete surface finished even and smooth without using extra cement complete all as specified and directed.

Rendering 5 mm thick in CM 1:3 on fair faces of concrete as in ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Preparation of new plaster surface of walls and applying two coats of oil bound distempers over one coat of primer and two coat of wall care putty complete all as specified and directed by Engr-in-Charge.

Preparation of new plastered or un- plastered surfaces and applying three coats of white wash on ceiling, chajja complete all as specified and directed.

Taking down frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 Sqm Each including iron mangery complete all as specified and directed.

PVC moulded door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing complete all as specified and directed.

Butt hinges, 100 mm size extruded aluminium alloy with galvanised mild steel hinge pin, anodised complete all as specified and directed.

150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

150 mm length aluminium handles fabricated type anodised complete all as specified and directed.

Steel window (box type) factory made with side hung shutters including pintol hinges, steel handles, steel peg stay and all locking arrangement complete with glazing bars dovetailed or welded including one shop coat of red oxide primer complete all as specified and directed. Note : i) The window shall be fabricated as per Drg No CEUZ/TD/ 1269/2008 Sheet 1/3 to 3/3 ii) MS fillets, glazing, wire gauge shall be measured and paid separately.

All as per ser item No 47 aobve but wire gauge shutters complete all as specified and directed.

Framed work such as grill, gratings, etc with ends of bars shouldered and/or riveted or forged in to spikes, framed guard bars, barred iron doors ladders framed balusters and similar work confirming to Fe 290 Gde E-165 complete all as specified and directed.

Steel Ventilators with top hung/side hung shutter including hinges steel peg stay, complete all as specified and directed.

Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and directed.

Sheet glass 3 mm thick ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in Each pane complete all as specified and directed.

Sheet glass 3 mm thick figured glass, pin headed type and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in Each pane complete all as specified and directed.

Galvanised mild steel wire cloth 0.56 mm nominal dia of wire and awerage width of aperture 1.18 mm and fixed with tinned tacks in repair complete all as specified and directed.

Taking down frames with shutters (without taking off shutters from the frame) area exceeding 1.5 Sqm but not exceeding 4 Sqm Each including iron mangery complete all as specified and directed.

Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each complete all as specified and directed.

105 x 60 mm pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer complete all as specified and directed.

125 x 60 mm pressed steel frames for doors with one or more rebate including necessary fixing lugs, hinges lock strike plate etc complete as specified including a coat of shop coat zinc chrome primer complete all as specified and directed.

Factory made 35 mm thick 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete all as specified and directed by Engr-in-Charge.

35 mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass/gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass and gauge etc. complete all as specified and directed.

Preparation of new wooden surfaces of any description, not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of primers complete all as specified and directed.

100 mm size mild steel butt hinges medium weight cold rolled complete all as specified and directed.

300 mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

300 mm ordinary rat rail rod pattern spring including roller and roller plate complete all as specified and directed.

Floor door stoper (140 mm length) of aluminium alloy body complete all as specified and directed.

Door closer hydraulically regulated, designation no 2 universal type suitable for door shutter of 701 to 850 mm in width and of weight between 36 to 60 kg Aluminium (extruded section) body in repair complete all as specified and directed.

Prelaminated particle board of 18/19 mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc complete all as specified and as directed.

2nd class HW plain fillets squre, rectangular or triangular in section clean sawn, secured with nails or brads exceeding 3 sqcm but not exceeding 6 sqcm complete all as specified and directed.

Hasp & staple 100 mm size aluminium anodised fixed with screws complete all as specified and directed.

Continous (Piano) hinges, mild steel, bright finished or electrogalvanised width of flaps in 30 mm complete all as specified and directed.

40 mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and directed.

18/19 mm thick block board, grade 2 quality, interior grade, commercial type fixed with screws to timber frame work/ iron frame work (Termite treated/water proof) in repair complete all as specified and directed. Make : Green Ply/Kit ply.

0.9 mm thick decorative choice of lamination type-1 of surface finish, colour and pattern as approved adhesive as per manufacturers instructions complete all as specified and directed.

Stain less steel catcher of superior quality as in repair complete all as specified and directed by Engr-in-Charge.

50 mm stain less steel pivoted type hinges of superior quality in repair complete all as specified and directed by Engr-in-Charge.

75 mm long aluminium alloy handles, fabricated type, anodised (ISI Marked) in repair all as approved and complete all as specified and directed by Engr-in-Charge.

Drawer side channel of std size and including of rooler for moving drawer, mild steel bright finish, or electro galavanised width of flap 30 mm & Length 60 mm in repair complete all as specified and directed.

Stainless steel multi-purpose basket in wooden drawer/partitions for storing rations of various types made of 4 mm dia stainless steel rods, fixed in side partitions etc fixed in repair complete all as specified and directed for modular kitchen.

Stainless steel luddle-craddle hanging stand for cutlery in repair complete all as specified and directed by Engr-in-Charge for modular kitchen.

Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm in repair complete all as specified and directed.

1.00 mm thick stainless steel double bowl Sinks with plugs, washers and wastes, including fixing contilever brackets and connecting union to pipe in repair (size of bowl 410 mm x 330 mm x 160 mm) complete all as specified and directed.

Water closet wall mounted pattern coloured of size 535 x 380 x 400 mm in repair as approved and complete all as specified and directed by Engr-in-Charge . Make : CERA Cat Part No (S1041109 P trap), Seat cover B1510108 Clair seat cover.

WHB coloured 550 mm x 480 mm with Pedestal in repair as approved and complete all as specified and directed by Engr-in-Charge. Make :CERA Cat Part No (S2040115 & S2090111).

15 mm bore centre hole basin mixer with round spout with 450 mm long copper pipes and brass nuts with out Pop up in repair complete all as specified and directed. Make: Jaquar, Cat Part No CON 167KNB and equvalent in CERA.

15 mm bore long body Bib tap in repair complete all as specified and directed. Make : Jaquar Cat Part No CON-037KN and equvalent in CERA.

15 mm bore Bib tap in repair complete all as specified and directed. Make : Jaquar Cat Part No CON 107KN and equvalent in CERA.

15 mm bore angular stop cock with wall flange in repair complete all as specified and directed. Make: Jaquar Cat Part No CON-059KN and equvalent in CERA.

Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe in repair complete all as specified and directed. Make : CERA Cat Part No F8030103 and equvalent .

Chromium plated toilet paper holder in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equvalent in CERA.

Glass shelf with chromium plated guard rails in repair complete all as specified and directed. Make : Jaquar, Cat Part No ACN-1171N and equivalent in CERA.

600 mm long brass chromium plated towel rail fancy type in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN-1111NM and equvalent in CERA.

Soap dish in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1131N and equvalent in CERA.

Towel rack in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1181FN and equvalent in CERA.

Double Coat hook in repair complete all as specified and directed. Make : Jaquar Cat Part No ACN 1161N and equvalent in CERA.

Rotational moulded polyethylene water storage tanks 500 ltrs (cylindlerical verrtical with closed top) hoisted and fixed in position in repair complete all as specified and directed in SSR part I inclding dismantaling of existing damaged water tanks.

Rotational moulded polyethylene water storage tanks 1000 ltrs (cylindlerical verrtical with closed top) hoisted and fixed in position in repair complete all as specified and directed in SSR part I inclding dismantaling of existing damaged water tanks.

PTMT ball valves 20 mm dia high pressure with epoxy coated aluminium rod and high denscity plastic ball screwed for iron pipes and fixed to iron pipes complete all as specified and directed.

Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore in repair complete all as specified and directed.

Steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 15 mm bore.including taking down old pipe complete all as specified and directed.

Steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20 mm bore.including taking down old pipe complete all as specified and directed.

40 mm waste coupling of PTMT (half or full threaded) (Minimum weight 60 gms) in repair complete all as specified and directed.

40 mm dia PVC waste pipe for sink and wash hand basin of pressure rating 10 kgf/Sqm in repair complete all as specified and directed.

PVC (SWR) Floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement including removing old trap and making good in repair complete all as specified and directed by Engr-in-Charge.

PVC connection 15 mm dia and 45 cm long with two Nos of PTMT checknuts and washers in repair complete all as specified and directed.

PVC bathroom cabinet 450 x 600 mm size with door fitted with looking mirror in repair as per sample approved and complete all as specified and directed by Engr-in-Charge.

Vitreous china squatting pan, Orrisa pattern of size 580 mm x 440 mm white with integral foot rests excluding flushihng cistern and flush pipe in repair complete all as specified and directed.

Vitreous china ware wash down water closet pan, (pedestal pattern) coloured including connection to drain and to flushing pipe, anti syphonage pipe etc. in repair complete all as specified and directed.

WHB vitreous china (flat back or angle back type) any size, including cutting for pinning in ends size 550 x 400 mm including brackets, 32 mm CP waste fittings coupling, connection pipe 450 mm long and 15 mm dia CP piller taps fancy type in repair complete all as specified and directed.

10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle in repair complete all as specified and directed.

Plastic water closet seat cover, black or white closed pattern, solid type with flat bottom and cover and mild steel chromium plated hinging device (Make CERA or equivalent) any type of EWC in repair complete all as specified and directed.

Pillar tap cast copper alloy with capstan head, chromium plated screwed down high presure with or with out lettered fixed with iron pipe of dia 15 mm in repair complete all as specified and directed.

Stop valves cast copper alloy chromium plated with long shank (concealed), screwed both ends for iron pipe 15 mm bore in repair complete all as specified and directed.

Bib taps cast copper alloy with crutch or butter fly handle screwed for iron pipe of dia 15 mm fixed in repair complete all as specified and directed.

20 mm dia powder coated tubular curtain rail with brackets in repair complete all as specified and directed by Engr-in-Charge.

125 mm dia brass chromium plated shower rose with swivel joints in repair complete all as specified and directed.

1 mm thick stainless steel plate rack of size 900 x 750 mm of approved make and quality in repair complete all as specified and directed by Engr-in-Charge.

khajuria builders

VISHWANATH AND SONS

M/S ASHOK KUMAR PACHIALA

RAMAN CONSTRUCTION CO

SODHI TRADING CORPORATION