C/O VETENARY HOSPITAL BUILDING AT BIJHARI DISTRICT HAMIRUR H.P.

Amount

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m (one point five metre) in width or 10 sqm (ten square metre) on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, (one point five metre) (including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m.(Fifty metre) in ordinery rock including carriage of materials within all leads and lifts . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m,(one point five metre) including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm(twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m(fifty metre) Pipes, cables etc. exceeding 80 mm (eighty mllimetre ) dia. but not exceeding 300 mm (three hundred millimetre) dia including entire carriage of material in all leads and lifts disposed materials to be neatly leveled. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform Shelves (Cast in situ) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls Under 20 cm (twenty centimetre) wide . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Centering and shuttering including strutting, propping etc. and removal of form work for Columns, piers, abutments, pillars, posts and struts . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Centering and shuttering including strutting, propping etc. and removal of form work for Stairs, (excluding landings) except spiral staircase . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, (five centimetre to Twenty centimetre) in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Supplying, filling, spreading & leveling course sand of size range 1.5mm to 2mm (one point five millimetre to two millimetre ) to thickness in recharge pit, in the required thickness over graded layer for all leads & lifts, all complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 ( one cement : four coarse sand: Eight graded stone aggregate 40 mm (forty millimetre nominal size) all work up to plinth leve including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:5:10 (one cement : five coarse sand: ten graded stone aggregate 40 mm (forty millimetre nominal size) all work up to plinth level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying damp-proof course 40mm (forty millimetre) thick with cement concrete 1:2:4 (one cement : two coarse sand: four graded stone aggregate 12.5mm (twelve point five millimetre) nominal size )including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing & applying a coat of residual petroleum bitumen of grade of VG-10(ten) of approved quality using 1.7kg(one point seven kilogram) per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc, including setting in cement mortar 1:3 (one cement : three coarse sand) cost of required centering, shuttering but, excluding the cost of reinforcement, with 1:1.5:3 (one cement : one and half coarse sand) : three graded stone aggregate 20 mm(twenty millimetre) nominal size). including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying in position machine batched and machine mixed design mix M-25(M- twenty five ) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge . Cement content considered in this item is @ 330 kg/cum.(Three hundred thirty kilogram / cubic metre) Excess/ less cement used as per design mix is payable/recoverable separately).All works upto plinth levle. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying in position machine batched and machine mixed design mix M-25(M- twenty five ) grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge . Cement content considered in this item is @ 330 kg/cum.(Three hundred thirty kilogram / cubic metre) Excess/ less cement used as per design mix is payable/recoverable separately).All works above plinth level upto all floor level . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering design mix M-20 (M-twenty) 20 mm (twenty millimetre) nominal size) all work up to plinth leve including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 ( one cement : six coarse sand : twelve graded stone aggregate 20 mm(twenty milimetre) nominal size) upto plinth level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Coursed rubble masonry (second sort) with hard stone in foundation & plinth with Cement mortar 1:6 (one cement : six coarse sand) .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Mild steel and Medium Tensile steel bars Steel reinforcement(Tata Tiscon/sail make) for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in Cement mortar 1:6 (one cement : six coarse sand) in super structure above plinth level up to all floors level including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying half block masonry with factory made Precast concrete solid blocks of 100 mm (one hundred millimetre) thickness of grade M-10 (M-Ten )made of C&D waste from approved manufacturer in superstructure above plinth level up to floor V level in cement mortar 1:4 (one cement : four coarse sand) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing 18 mm(eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm (twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Area of slab over 0.50 sqm (zero point five zero square metre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing edge moulding to 18 mm(eighteen millimetre) thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge marble work including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing Garsa stone 12mm.(twelve millimetre) cladding on R.C.C. surface side as on faces of Arch masonry walls etc. on 12mm (twelve millimeter) thick cement plaster 1:3 ( one cement: three course sand) and jointed with cement slurry i/c scaffolding etc. complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 35 mm(thirty five millimetre) thick including ISI marked Stainless Steel butt hinges with necessary screws including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Extra for providing lipping with 2nd. Class teak wood battens 25 mm (twenty five milimetre) minimum depth on all edges of flush door shutters (over all area of door shutter to be measured) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing 18 mm (eighteen millimetre) thick, 150 mm (one hundred fifty millimetre) wide pelmet of coir veneer board ISI marked IS : 14842, including top cover of 6 mm(six millimetre) coir veneer board, nickle plated M.S. Pipe 20 mm (twenty millimetre) dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm(twenty five into three millimetre) M.S. Flat 10 cm(ten centimetre) long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm (one hundred millimetre into forty millimetre into forty millimetre) on both inner side of pelmet and rawl plugs 75 mm(seventy five millimetre) long etc. all complete complete as per direction of the Engineer-in-Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel windows by welding including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing 40x5 mm (forty into five millimetre) flat iron hold fast 40 cm(foty centimetre) long including fixing to frame with 10 mm(ten millimetre) diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm (thirty into ten into fifteen centimetre) 1:3:6 mix (one cement : three coarse sand : six graded stone aggregate 20mmTwenty millimetre) nominal size including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing 0.63mm (Zero point six three millimeter) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNV) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to tack coat of polyester of 5 (five) microns priming coating including fixing with preprinted iron J or L hooks, volts and nuts 6mm (six millimeter) diameter with preprinted limpet and rubber washers complete with all accessories as required as per direction of Engineer in charge. including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Providing and fixing ridges or hips 62 cm (sixty two centimeters) overall with 0.60mm (Zero point six zero millimeter) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (twenty) microns over 5 (five) microns primer coating plus back coat of polyster of 5 (five) microns over 5 (five) microns priming coating including fixing and prepainting iron J or L hooks, volts and nuts 6mm (six millimeter) diameter with prepainted limpt and bitumen washers complete with all accessories as required as per direction of Engineer in charge including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Providing valleys of 90 cm (ninety centimetre) wide overall in plain G.S. sheet fixed with polymer coated J, or L hooks, bolts and nuts 8 mm (eight millimetre ) dia G.I. limpet and bitumen washers complete 1.60 mm(one point six zero millimetre) thick with zinc coating not less than 350 gm/m² (three five zero grame/ m2) as per direction of Engineer in charge including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Providing and fixing 20cm (twenty centimetre) wde eaves board overall with 0.62mm (Zero point six two millimeter) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester organic coating of 20 (twenty) microns over 5 (five) microns primer coating to tack coat of polyester of 5 (five) microns priming coating including fixing with preprinted iron J or L hooks, volts and nuts 6mm (six millimeter) diameter with preprinted limpet and rubber washers complete with all accessories as required as per direction of Engineer in charge. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing 15 cm (fifteen centimetre) wide, 45 cm (forty five centimetre) overall semi circular plain G.S. sheet gutter with iron brackets 40x3mm( Forty into three millimetre) size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete 0.80 mm ( zero point eighty millimetre) thick with zinc coating not less than 275 gm/m²( Two hundred seventy five gram per square metre ) .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm(ten millimetre) gap for thermal expansion, (i) Single socketed pipes. 110 mm (one hundred ten millimetre ) diameter including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion.110 mm (one hundred ten millimetre) coupler .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion .bend 110 mm (one hundred ten millimetre) .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm (ten millimetre) gap for thermal expansion .Shoe 110 mm (one hundred ten millimetre) .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 ( one cement : four coarse sand) and making good the wall etc. complete 110mm (one hundred ten millimetre) dia of D-plast or vectutus make including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing weep holes in brick masonry / stone masonry /plain and reinforced concrete abutment , wing wall ,return wall ,retaining and breast wall with 110mm (one hundred ten millimetre) dia PVC pipe (D-plast)/ Finolex/ Supreme having working pressure not less than 4 kg per centimeter square (Four Kilogram per centimeter square ) extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification clause 614, 709, 1204.3.7 as per direction of Engineer-in- Charge including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government

Earth work in excavation for structure as per drwaing and technical specifications Clause 305 including setting ut, construction of shoring and bracing removal of stumps and other deleterious materials and disposal upto a lead of 50.00 metre(fifty metre) gressing of sides and bottoms and back filling in tranches with excavated sutitable materials ordinery soil upto 3.00 metre(three metre) depth. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing 19mm ( Nineteen millimeter) thick HDHMR water proof anti termite resistant board confirming box including shelves and shutters, the back side of cup board / cabinet of 8mm (eight millimetre) thick ply and cut portions of shelves shall be finished with 6mm(six milimetre) hard board edging, The shutters from all the sides shall be finished with 12mm(twelve millimetre) thick hard wood edging . The shutters from out side shall be finished with 4mm (four millimetre) thick vaneer ply of approved shade to match with paneling including stainless steel piano hinges and magnetic catcher with all ascessories as per direction of Engineer-in- Charge. including entire carriage of materials in all leads and lifts .The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm,(thirty five into thirty five into five millimetre) joints mitred and welded by angle iron 35x35x5 mm(thirty five into thirty five into five millimetre) or 35x 5 mm(thirty five into five millimetre) flat pieces to the existing Tiron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Supplying and stacking at site of work standard steel section door windows or clerestort window manufactured from ISMC channel made of Tata steel Jindal, Bhushan of standard section 75x40mm(seventy five into forty millimetre) with M.S flat 75x5mm(seventy five into five mllimetre) in combination including hinges, jambs, lock jamb,beed and if required angle threshold mild steel angle 50x25mm(fifty into twenty five millimetre) welded or rigidly fixed by mechanical means with split end tails to each jambs including steel butt hings 25mm (twenty five millimetre) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after per treatment of the surface as directed by Engineer-in- Charge .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing steel glazed windows shutter made of Tata steel Jindal, Bhushan of standard steel Z-section style of standard size with mesh bar of T-section 25x15x3mm as per drawing complete with fitting necessary screws and applying a priming coat of red led paint complete as per approved specification/ design for side hung windows .including entire carriage of material in all leads and lifts The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing steel glazed windows shutter made of Tata steel Jindal, Bhushan of standard steel Z-section style of standard size with mesh bar of T-section 25x15x3mm (twenty five into fifteen into three millimetre)as per drawing complete with fitting necessary screws and applying a priming coat of red led paint complete as per approved specification/ design for fixed windows glazing glass pane 4mm thick with glazing clips and special metal sash putty of approved quality including entire carriage of material in all leads and lifts The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing steel glazed windows shutter made of Tata steel Jindal, Bhushan of standard steel Z-section style of standard size with mesh bar of T-section 25x15x3mm (twenty five into fifteen into three millimetre)as per drawing complete with fitting necessary screws and applying a priming coat of red led paint complete as per approved specification/ design for wire gauge shutter including entire carriage of material in all leads and lifts The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing mild steel B.P sheet 1.66 mm to 2mm(one point six six millimetre to two milimetre)thick in eaves board/ facia/ soffits/ ceiling including cutting , fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in Charge (Base members od steel work shall be measured and paid separately including entire carriage of material in all leads and lifts. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government .

Providing and fixing mild steel tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying 6 mm (six millimetre) plaster in cement mortor 1:3(one cement isto three course sand) as per the direction of Engineer-In-Charge including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying 15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 (one cement : Six course sand) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying 15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:3 (one cement : three course sand) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Kota stone slab flooring over 20 mm( twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) 25 mm (twenty five millimetre )thick including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Kota stone slab flooring with rough sides upwards and laid over 20 mm( twenty millimetre) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement : four coarse sand) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Kota stone slabs 20 mm (twenty millimetre )thick in risers of steps, skirting, dado and pillars laid on 12 mm (twelve millimetre) (average) thick cement mortar 1:3 (one cement: Three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying rectified Glazed Ceramic floor tiles made of Kajaria/ Nitco first class quality of size 300x300 mm (three hundred into three hundred millimetre) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick Cement Mortar 1:4 (one Cement : four Course sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc. complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying rectified Glazed Ceramic floor tiles made of Kajaria/ Nitco first class quality or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except burgundy , bottle green, black of any size of approved by Engineer-in- Charge in skirting risers of steps and dados over 12 mm (twelve millimetre) thick Cement Mortar 1:3 (one Cement : three Course sand), jointing with grey cement slurry @ 3.3 kg/ (Three decimal three kilogramme) sqm including pointing the joints with white cement and matching pigments etc. complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and laying matt finished vitrified tile made of Kajaria/ Nitco first class quality of size 300x300 x 9.8mm(three hundred into three hundred into nine point eight millimetre) having with water absorption less than 0.5%(zero point five percent) and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm (twenty millimetre) thick base of cement mortar 1:4 ( one cement : four coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-inCharge.including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm (forty millimetre ) thick with 20 mm(twenty millimetre) nominal size stone aggregate including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 250×16mm( two hundred fifty into sixteen millimetre)including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete 300×16mm( three hundred into sixteen millimetre)including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10mm( two hundred fifty into ten millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125mm (one hundred twenty five millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 100mm (one hundred millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and applying white cement based putty of average thickness 1 mm, (one millimetre) of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Finishing walls with 100% (hundred percent ) Premium acrylic emulsion paint having VOC less than 50 gm/litre(fifty gram/ liter) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives . New work (Two or more coats applied @ 1.43 litre/ 10 sqm.(one point four three liter/ ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm(zero point nine zero liter/ ten square metre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

French spirit polishing two or more coats on new works including a coat of wood filler including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Constructing course rubble hammer dressed 'U' shape open surface drain with side wall 15x22 cms (Fifteen into Twenty Two centimeters) in cement mortars 1:6 (One cement : Six sand) and inside plastering with cement plaster 1:3 (One cement : Three sand) including earth work and laying 10cms (Ten centimeters) cement concrete 1:5:10 (One cement : Five sand : Ten graded crushed stone aggregate) 40mm (Forty millimeters) nominal size and 7.5 cm (Seven point five centimeters) cement concrete 1:2:4 (One cement : Two sand : Four graded stone aggregate 20mm (Twenty millimeters) nominal size and finished with a floating coat of neat cement complete . including carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government .

Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : Three coarse sand (zone - III) : six graded stone aggregate 20 mm(twenty millimetre) nominal size) over 75mm (seventy five millimetre) thick bed of dry brick ballast 40 mm(forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work exposed on wall 15 mm (fifteen millimetre) dia nominal bore including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work exposed on wall 32 mm (thirty two millimetre) dia nominal bore including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall 15 mm (fifteen millimetre) dia nominal bore including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing G.I. Pipes complete with G.I. fittings including trenching and refilling etc. External work. 20 mm (twenty millimetre) dia nominal bore including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing G.I. Pipes complete with G.I. fittings including trenching and refilling etc. External work. 15 mm (fifteen millimetre) dia nominal bore including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Fixing water metre and stop cock in G.I pipe line including cutting and threading the pipe and making long screws etc. complete cot of wter meter and stop cock to be paid separately. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing gun metal gate valve with C.I wheel of approved quality (screwed end.) 20mm(twenty millimetre) nominal dia. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing water closet squatting CAT No 20004 of Hindware or its equlvalent ( Indian type W.C pan) with 100mm(one hundred millimetre) sand cast iron Por S trap P.V.C flushing cistern SLEEKFRESS DUAL. FLUSH, , including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required White vitreous china Orissa pattern size 530x410mm( five hundred thirty into four hundred ten millimetre) of Hindware or Cera intergal type foot rest .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan cat No 20079) with seat and lid, white shade of Hindware/ Cera with seat and lid. low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid complete .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing water closet squatting pan (indian type.W.C pan) with long with S.S triangular plate to Eureopean type W.C of quality and make as approved by Engineer-n-Charge. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing wash basin white vitreous china wash basin No 1008 size 630x450x290mm ( six hundred thirty into four hundred fifty into two hundred ninety millimetre) including cutting holes and making good the same superior quality as per direction of Engineer-in-Charge. .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing soap dish stainless steel No 1531 of Juguar orequivalent complete in all respect. .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing C.P brass toilet paper holder including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm(five hundred ten into one thousand forty millimetre) bowl depth 250 mm (two hundred fifty millimetre ) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32 mm (thirty two millimetre) dia of Hindware or Cera .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing uplasticised PVC connection pipe with brass unions 45 cm (forty five centimetre) length 15 mm(fifteen millimetre) nominal bore Jal, Hindware or Finolex .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing 600x450 mm (six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 40mm (forty millimetre) nominal bore .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm(fifteen millimetre) nominal bore Jal, Hindware or Cera .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.(eifgt hundred ten grams) 15 mm(fifteen millimetre) nominal bore Jal, Hindware or Cera .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm(fifteen millimetre) nominal bore Jal, Hindware or Cera .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing C.P. brass mixer for kitchen sink with casted swinging CON-CHR-309 KNM JAQUAR OR EQUIT. complete in all respect .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 20mm (twenty millimetre) nominal bore .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) 15mm (fifteen millimetre) nominal bore .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing PTMT grating of approved quality and colour 100mm ( one millimetre) nominal dia .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government

Providing and fixing high pressure made of Paryware , Hindware , Cera/finolex of following dia PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size

Providing and fixing high pressure made of Paryware , Hindware , Cera/finolex of following dia PVC spigot and socket waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government 110mm ( one hundred ten millimetre ) nominal size

Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor etc. complete including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government 110x90mm ( one hundred ten into ninety millimetre ) nominal size

Providing and fixing PVC door bend with oval access dor, insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government 110mm ( one hundred ten millimetre ) nominal size

Providing and fixing PVC door bend with oval access dor, insertion rubber washer 3mm (three millimetre) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. including entire carriage of material within all leads and lifts and other incidentals The rates are inclusive of octroi, royality malkana ,toll tax, sale tax or other taxes imposed by the Government 150mm ( one hundred fifty millimetre ) nominal size

Providing and fixing plain bend of required degree 110 mm (one hundred ten millimetre) dia Sand cast iron S&S as per IS - 1729 including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing plain bend of required degree 160 mm (one hundred sixty millimetre) dia Sand cast iron S&S as per IS - 1729 including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm(fifteen millimetre) nominal bore Zindal/ Tata make .including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 25 to 40 mm (twenty five to forty millimetre) nominal bore including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : One & Half coarse sand (zone- III) : 3 graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : Eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 ( one cement : Two coarse sand : four graded stone aggregate 20 mm(twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard designInside size 120x90 cm (one hundred twenty into ninety centimetre) and 90 cm (ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilograme (weight of cover 58 kg (fifty eight kilograme) and weight of frame 58 kg) (fifty eight kilograme):With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Sintex make including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing PVC single equal plain branch with oval access door ISI marked , insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete 110mm (one hundred ten millimetre) including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing PVC collar 110 mm (one hundred ten millimetre) dia ISI marked including fixing with approved adhesive etc. complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing PVC collar 150 mm (one hundred fifty millimetre) dia ISI marked including fixing with approved adhesive etc. complete including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing PVC clamps ISI marked including fixing with approved design with steel screws and orwer plug etc. complete. including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Construction soak pit 1.20 x 1.20x1.20m(one point two zero into one point two zero into one point two zero metre) filled with brick bats including S.W drain pipe 100mm(one hundred millimetre) diametre and 1.20 m ( one point two zero metre) long complete as per standard design including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality L.D 2.5 Rectangular shape 600x450 mm(six hundred into four hundred fifty millimetre) internal dimensions . including entire carriage of material in all leads and lifts . The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government

Devender Kumar