Design, fabrication, installation, testing and commissioning of 140 ampere LT control panel with allied works at pumping station Garnai stage-0, providing and fitting of electro mechanical components such as main switches / MCCBs at various stage o

Amount

Providing and fitting of electro-mechanical components at various stages of Garnai. The scope of work covers fabrication, providing and fitting of angle iron board, fitted with ply board and then providing and fitting of 200 ampere main switch on the board. Providing, installation, testing and commissioning of 8000 GPH x 13 meter head mono bloc submersible to connect with the suction of 8000 GPH x 250 meter head pump to boost its suction. Job involves providing and fitting of pump, adapter / extension piece as per the delivery of the pump alongwith DOL starter, submersible cable with proper thimbling and insulation. Job also includes providing and fitting of 120mm2 aluminum cable single core from transformer to pole approximately 15 meters in length conforming to ISI standard with proper thimbling and insulation.

Fabrication and erection of CGI shed of dimension 14’x12’x10’ at pumping station Garnai stage-0. The job involves excavation / leveling of ground together with digging of pits on four corners with the help of JCB and manual labour. Laying of C.C 1:3:6 foundation block on four corners with embedment of angle iron in vertical position with suitable anchoring at bottom. Thereafter providing and positioning of angle iron around the entire perimeter to form a frame work. Covering / cladding CGI sheet on the same using hooks / fasteners and washers / rivets etc. to form side walls and roof alongwith proper cut outs for suction and delivery. Job also involves fabrication and fitting of MS sheet door for the enclosure complete with frame, hinges, lock etc. The job also includes laying of CC floor 14’x12’x50 mm inside the newly laid shed in ratio of 1:4:8 after / in coordination with the laying of foundation blocks. The complete job comprises of three no. sub-jobs i.e. (1.0,1.1,1.2) and shall be allotted on over all lowest basis. The complete job includes cost of material, machinery and equipment, unskilled and skilled labour charges covering handling, carriage, drilling, cutting, welding and other mechanical jobs, manual carriage & transportation charges, hire charges of tools and tackles etc.

GANPATI ELECTRICAL AND MECHANICAL WORKS

N B Engineering and Electric Works