Supply Erection, and Commissioning of EB service Panel and Service Connection to 1 to 24 Individual Shops at New Thernilayam Vegetable Market in Pollachi Municipality

Service Connection Accessories L.T. 1100V PVC Aluminium Armoured Under Ground Cable With ISI Mark Supply and delivery of 3.5 core 185 sq.mm. PVC Armoured UG Cable

TANGEDCO Pole to Pillar Box

Supply and fixing of brass cable gland for 3-1/2 x 185 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 3-1/2 x 185 sq.mm. PVC LT UG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Cable Clamps 3.5 core 185 sq.mm. PVC Armoured UG Cable

TANGEDCO Pole to Pillar Box

Supply,delivery and fixing of one set of 3-phase aerial HRC (High Rupturing Capacity) fuses, 125 A rating, complete with fuse links, fuse bases mounted on a mild steel (MS) Fabricated base frame suitable for mounting on TANGEDCO distribution pole.

GI Pipes “B” Class 65 mm

TANGEDCO Pole to Service Panel 1

GI Elbow 65 mm

GI Coupling 65 mm

GI Union 65 mm

M.S.Clampset

Erection of 65 B-class GI pipe with necessary GI specials (bends, sockets, couplers, tees, etc.) including cutting, threading, jointing, clamping and fixing on pole/wall/trench for covering TANGEDCO service main cable as per IE norms, complete in all respects

Supply and fixing of 8 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB switch as incoming and 3 nos. 32A 3P MCB, 15 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only. Street Light and Borewell Pumpsets

Supply and laying of 4 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 metre layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good

Supply and fixing of brass cable gland for 4 x 16 sq.mm. PVC armoured LTUG cable with earth connection

Supply and providing cable end termination of 4 x 16 sq.mm. PVC LT UG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete

Supply and Delivery of TANGEDCO Wall-Mounting / Stand-Type Service Panel Construction: Fabricated from 16 SWG CRCA sheet, finely finished.Dust-proof design, complying with IE norms.Duly powder coated with Siemens Grey shade for corrosion resistance and aesthetic appearance. Service Connections: Single Phase: 8 Nos.Each equipped with:32A Fuse Carrier – 1 No,32A Neutral link – 1 No,2-Pole 20A RCCB – 1 No. with Cable Connection Flat. Additional Features: High-grade insulating (Higlam) sheet,Suitable bus bars, Suitable Earthings, Sealed bolt for each service connection.Panel to be fabricated strictly as per TANGEDCO norms.

Erection, testing, and commissioning of TANGEDCO service panel in compliance with IE norms.

Supply of Mild Steel (MS) 6-Way Outdoor Pillar Box with HRC fuses, fabricated and assembled as per TANGEDCO norms, using weather-resistant MS sheet with suitable powder coating for corrosion protection, provided with lockable doors and necessary busbars, insulators, and earthing arrangements for safe operation

Erection of Pillar Box Ms 6 Way With Hrc Fuse as per TANGEDCO norms with Sultable Bolt nuts and Insulation Materials

Supply and Run of 3 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 4 sq.mm copper wire with painting of suitable colour.

Supply and Delivery of Miniature Circuit Breakers 240 V / 415v 50hz- Ac Supply Suitable For Both Lighting And Motor Circuits - Higher End Double Pole 6A to 32A, 10KA

Erection of of Miniature Circuit Breakers 240 V / 415v 50hz- Ac Double Pole 6A to 32A, 10KA

Supply and Installation of Copper Plate Earthing – 40 mm Dia (Maintenance Free),With 10 SWG copper wire Double earthing connection up to Service Panel & Pillar Box

Dismantaling the existing PCC including all labour charges and clearing away from the site etc complete as per std specification

Removal of existing paver blocks for laying Service Main Cable, Required length and depth excavation for placing HDPE pipe, After pipe erection, refixing the removed paver blocks properly with compaction. Ensuring neat finishing and proper leveling of the pavement.