Construction of MP hall in JNV at Moradabad (Uttar Pradesh)

NAME OF WORK :- Construction of MP Hall at JNV, Moradabad (UP)

Sl. Estimated cost (in Rs)

No. Details of work

DSR-2021 DSR-2022 N.S

1 Main Building-MP Hall

4 Fire Fightining work ₹ 6,46,898.08 ₹ 2,72,329.00

6 Sound System ₹ 12,00,000.00

A GRAND TOTAL ₹ 3,48,17,533.00

A GRAND TOTAL ₹ 3,48,17,533.00

2 Development Work

2 Internal CC Road ₹ 6,54,409.62

3 External water supply ₹ 33,222.36 ₹ 40,000.00

4 Drainage System ₹ 2,41,322.23

5 External Sewerage line ₹ 3,64,529.48

6 External Electrification

(i) Supply & laying of cable ₹ 15,563.65 ₹ 35,231.06

(ii) External lights ₹ 70,537.32

(iii) Earthing & miscellaneous items ₹ 67,131.02 ₹ 16,000.00

GRAND TOTAL ₹ 18,92,467.00

GRAND TOTAL ₹ 18,92,467.00

Grand Total (A+B) ₹ 3,67,10,000.00

Grand Total (A+B) ₹ 3,67,10,000.00

Digitally signed by

CHANDRESH KUMAR

BILL OF QUANTITY FOR CIVIL WORKS

[ MULTIPURPOSE HALL]

DESCRIPTION OF ITEM

DSR- DSR NS AMOUNT DSR AMOUNT

S.N. QUANTITY UNIT

2021 Rates(Rs) Rates(Rs) ITEM(Rs) [M.R. ITEM](Rs)

Earth work in excavation by mechanical means (Hydraulic

excavator) / manual means in foundation trenches or drains (not

exceeding 1.5 m in width or 10 sqm on plan), including dressing

of sides and ramming of bottoms, lift upto 1.5 m, including

getting out the excavated soil and disposal of surplus excavated

soil as directed, within a lead of 50 m.

Filling available excavated earth (excluding rock) in trenches,

plinth, sides of foundations etc. in layers not exceeding 20cm in

depth,consolidating each deposited layer by ramming and

watering, lead upto 50 m and lift upto 1.5 m.

Supplying and filling in plinth with sand under floors, including

3 2.27 watering, ramming,consolidating and dressing complete. 201.090 CUM 2233.77 4,49,189.43

Excavating, supplying and filling of local earth (including royalty)

by mechanical transport upto a lead of 5km also including

4 2.25a ramming and watering of the earth in layers not exceeding 20 605.880 CUM 381.03 2,30,858.01

cm in trenches, plinth, sides of foundation etc. complete.

Anti termite treatment

Supplying chemical emulsion in sealed containers including

delivery as specified.

2.34.1 Chlorpyriphos emulsifiable concentrate of 20% 50.000 Litre 251.59 12,579.70

Diluting and injecting chemical emulsion for POST-

2.35 CONSTRUCTIONAL anti-termite treatment (excluding the cost of

chemical emulsion) :

Along external wall where the apron is not provided using

chemical emulsion @ 7.5 litres / sqm of the vertical surface of

6 2.35.1.1 the substructure to a depth of 300mm including excavation 98.032 Metre 33.38 3,272.76

channel along the wall & rodding etc. complete: With

Chlorpyriphos/ Lindane E.C. 20% with 1% concentration

Treatment of soil under existing floors using chemical emulsion

@ one litre per hole, 300 mm apart including drilling 12 mm

2.35.3 diameter holes and plugging with cement mortar 1 :2 (1 cement

: 2 Coarse sand) to match the existing floor:

With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

B Concrete Work

Providing and laying in position cement concrete of specified

grade excluding the cost of centering and shuttering - All work

8 4.1.10 up to plinth level 1:5:10 (1 Cement : 5 coarse sand (zone-III) 165.020 CUM 6253.83 10,32,007.16

natural sources : 10 graded stone aggregate 40 mm

nominal size derived from natural sources)

Providing and laying damp-proof course 40mm thick with

cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III)

9 4.10 derived from natural sources : 4 graded stone aggregate 61.230 SQM 383.30 23,469.65

12.5mm nominal size derived from natural sources)

Extra for providing and mixing water proofing material in cement

10 4.12 concrete work in doses by weight of cement as per 16.000 59.07 945.11

manufacturer's specification.

Providing & applying a coat of residual petroleum bitumen of

grade of VG-10 of approved quality using 1.7kg per square

11 4.13 metre on damp proof course after cleaning the surface with 61.230 SQM 117.67 7,205.12

brushes and finally with a piece of cloth lightly soaked in

Making plinth protection 50mm thick of cement concrete 1:3:6

(1 cement : 3 coarse sand (zone-III) derived from natural

sources : 6 graded stone

12 4.17 aggregate 20 mm nominal size derived from natural sources) 127.940 SQM 704.54 90,138.82

over 75mm thick bed of dry brick ballast 40 mm nominal size,

well rammed and consolidated and grouted with fine

sand,including necessary excavation,levelling & dressing &

finishing the top smooth.

Brick edging in full brick width and half brick depth including

excavation, refilling and disposal of surplus earth lead upto 50

With common burnt clay F.P.S. (non modular) bricks of class

designation 7.5

C Reinforced Cement Concrete

Centering and shuttering including strutting, propping etc. and

removal of form for all heights :

Foundations, footings, bases of columns, etc. for mass concrete.

Suspended floors, roofs, landings, balconies and access

(c) 5.9.5 Lintels, beams, plinth beams, girders, bressumers 1489.503 RM 628.78 9,36,567.30

(d) 5.9.6 Columns,Pillars, Piers, Abutments, Posts and Struts. 776.079 SQM 831.26 6,45,120.88

Edges of slabs and breaks in floors and walls Under 20 cm wide.

Extra for additional height in centering, shuttering where ever

required with adequate bracing, propping etc., including cost of

de-shuttering and decentering at all levels, over a height of 3.5

15 5.11.1 m, for every additional height of 1 metre or part thereof (Plan 515.160 SQM 329.97 1,69,987.56

area to be measured).

Suspended floors, roofs, landing, beams and balconies (Plan

area to be measured)

CHANDRESH KUMAR

DESCRIPTION OF ITEM

DSR- DSR NS AMOUNT DSR AMOUNT

S.N. QUANTITY UNIT

2021 Rates(Rs) Rates(Rs) ITEM(Rs) [M.R. ITEM](Rs)

Steel reinforcement for R.C.C. work including straightening,

16 5.22.6 cutting, bending, placing in position and binding all complete 19198.230 KG 92.66 17,78,916.57

upto plinth level. Thermo-Mechanically Treated bars of grade

Fe-500D or more.

Steel reinforcement for R.C.C. work including straightening,

17 5.22.A.6 cutting, bending, placing in position and binding all complete 30960.900 KG 92.66 28,68,850.83

above plinth level. Thermo-Mechanically Treated bars of grade

Fe-500 D or more.

Add for plaster drip course/ groove in plastered surface or

moulding to R.C.C. projections.

Providing and laying in position ready mixed or site batched

design mix cement concrete for reinforced cement concrete

work; using coarse aggregate and fine aggregate derived from

natural sources, Portland Pozzolana / Ordinary Portland

/Portland Slag cement, admixtures in

recommended proportions as per IS: 9103 to accelerate / retard

setting of concrete, to improve durability and workability without

impairing strength; including pumping of concrete to site of

19 5.33 laying, curing, carriage for all leads; but excluding the cost of

centering, shuttering, finishing and reinforcement as per

direction of the engineer-in-charge; for the following grades of

Note: Extra cement up to 10% of the minimum specified cement

content in design mix shall be payable separately. In case the

cement content in design mix is more than 110% of the specified

minimum cement content, the contractor shall have discretion to

either re-design the mix

cost of extralevel

plinth cement.

Concrete of M25 grade with minimum cement content of

Concrete of M30 grade with minimum cement content of

5.33.1.2 (iii) R.C.C. work in Columns 20.710 CUM 9121.71 1,88,910.52

(II) 5.33.2 All works above plinth level upto floor V level

Concrete of M25 grade with minimum cement content of

Concrete of M30 grade with minimum cement content of

5.33.2.2 (iii) R.C.C. work in Columns 54.324 CUM 10829.59 5,88,306.80

D Masonry Work

Half brick masonry with common burnt clay F.P.S. (non

6.13.2 modular) bricks of class designation 7.5 in superstructure above 171.570 Sqm 1052.24 1,80,532.15

plinth level up to floor V level.Cement mortar 1:4 (1 cement :4

Extra for providing and placing in position 2 Nos 6mm dia. M.S.

bars at every third course of half brick masonry.

Brick work with non modular fly ash bricks conforming to

6.34.2 IS:12894, class designation 10 average compressive strength in 313.620 CUM 7934.07 24,88,283.08

superstructure above plinth level up to floor V level in : Cement

mortar 1:6 (1 cement : 6 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks

23 6.1.2 of class designation 7.5 in foundation and plinth in: Cement 104.880 CUM 6881.83 7,21,766.75

mortar 1:6 (1 cement : 6 coarse sand)

E Cladding Work

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills , facias and similar locations of

required size, approved shade, colour and texture laid over 20

24 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand),

joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete at all

Providing edge moulding to 18mm thick marble stone counters,

25 Vanities etc. including machine polishing to edge to give high

gloss finish etc. complete as per design approved by Engineer-in-

Extra for fixing marble /granite stone over and above

26 8.4 corresponding basic item, in facia and drops of width upto 150 79.50 RM 491.52 39,075.76

mm with epoxy resin based adhesive including cleaning etc.

Extra for providing opening of required size & shape for wash

basins/ kitchen sink in kitchen platform, vanity counters and

27 8.5 similar location in marble/Granite/stone work including 8.00 EACH 835.29 6,682.30

necessary holes for pillar taps etc. including moulding, rubbing

and polishing of cut edges etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles

conforming to IS: 15622 (thickness to be specified by the

manufacturer), of approved make, in all colours, shades except

burgundy, bottle green, black of any size as approved by

28 8.31 Engineer-in-Charge, in skirting, risers of steps and dados, over 268.670 SQM 1099.16 2,95,311.49

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse

sand) and jointing with grey cement slurry @ 3.3kg per sqm,

including pointing in white cement mixed with pigment of

matching shade complete.

(Size-300x450 )

F Wood and PVC Work

CHANDRESH KUMAR

DESCRIPTION OF ITEM

DSR- DSR NS AMOUNT DSR AMOUNT

S.N. QUANTITY UNIT

2021 Rates(Rs) Rates(Rs) ITEM(Rs) [M.R. ITEM](Rs)

Providing and fixing panelling or panelling and glazing in panelled

panelled and glazed shutters for doors, windows and clerestory

29 9.7 windows (Area of opening for panel inserts excluding portion

inside grooves or rebates to be measured). Panelling for panelled

or panelled and glazed shutters 25 mm to 40 mm thick :

9.7.7 Float glass panes

5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door

Frames of cross-section 90 mm x 45 mm having single rebate of

32 mm x 15 mm to receive shutter of 30 mm thickness. The

laminate shall be moulded with fire resistant grade unsaturated

30 9.121 polyester resin and chopped mat. Door frame laminate shall be 76.050 RM 726.19 55,227.00

2mm thick and shall be filled with suitable wooden block in all

the three legs. The frame shall be covered with fiber glass from

all sides. M.S. stay shall be provided at the bottom to steady

30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door

shutter in different plain and wood finish made with fire

retardant grade unsaturated polyester resin, moulded to 3

mm thick FRP laminate all around, with suitable wooden

blocks inside at required places for fixing of fittings and

31 9.122.2 polyurethane foam (PUF)/Polystyrene foam to be used as 24.860 SQM 4096.80 1,01,846.47

filler material throughout the hollow panel, casted

monolithically with testing parameters of F.R.P. laminate

conforming to table - 3 of IS: 14856, complete as per direction

of Engineer-in-charge.

Providing and fixing factory made uPVC white colour casement/

Casement cum fixed glazed door comprising of uPVC multi-

chambered frame, sash and mullion (where ever required)

extruded profiles duly reinforced with 1.60 ± 0.2 mm thick

galvanized mild steel section made from roll forming process of

required length (shape & size according to uPVC profile), uPVC

extruded glazing beads of appropriate dimension, EPDM gasket,

zinc alloy (white powder coated) 3D hinges and one handle on

each side of panels along with zinc plated mild steel multi point

lockinghaving transmission gear, cylinder with keeps and one

side key, G.I fasteners 100 x 8 mm size for fixing frame to

finished wall and necessary stainless steel screws, etc. Profile of

frame & sash shall be mitred cut and fusion welded at all

32 9.147C corners, mullion (if required) shall be also fusion welded

including drilling of holes for fixing hardware's and drainage of

water etc. After fixing frame the gap between frame and

adjacent finished wall shall be filled with weather proof silicon

sealent over backer rod of required size and of approved quality,

all complete as per approved drawing & direction of Engineer-in-

Charge. (Single / double glass panes and silicon sealent shall be

paid separately). Variation in profile dimension

in higher side shall be accepted but no extra payment on this

account shall be made.

Note: For uPVC frame, sash and mullion extruded profiles minus

5% tolerance in dimension i.e. in depth & width of profile shall be

Casement door with top hung ventilator with 3D and S.S.

friction hinges (400 x 19 x 1.9 mm) made of (big series)

mm all having wall thickness of 2.3 ±. 0.2 mm and

single glazing bead / double glazing bead of appropriate

dimension.(Area of door upto 2.50 sqm)

Providing and fixing fire resistant door frame of section 50 x 60

mm on horizontal side & 35 x 60 mm on vertical sides having

built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating

not less than 120gm/m²) suitable for mounting 120 min Fire

Rated Glazed Door Shutters. The frame shall be filled with

Mineral wool Insulation having density min 96Kg/m³ . The frame

will have a provision of G.I. Anchor fastners 14 nos ( 5 each on

34 9.161 vertical style & 4 on horizontal style of size M10 x 80 ) suitable 42.60 RM 1851.19 78,860.84

for fixing in the opening along with Factory made Template for

SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire

rated glazed shutter . The frame shall be finished with a

approved fire resistant primer or Powder coating of not less than

30 micron in desired shade as per the directions of Engineer - in-

charge . (Cost of SS ball bearing hinges is excluded).

Providing and fixing 60 mm thick glazed fire resistant door

shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or

EN1634-1:1999,tested and certified as per laboratory approved

by Engineer-in-charge, with suitable mounting on door frame,

consisting of vertical styles, top rail & side rail 60 mm x 60 mm

wide and bottom rail of 110 mm x 60mm made out of 1.6mm

35 9.162 thick G.I. sheet (zinc coating not less than120gm/m²) duly filled 30.60 SQM 10062.99 3,07,927.39

mineral wool insulation having density min 96 kg/m³ and fixing

with necessary stainless steel ball bearing hinges of

size100x89x3mm of approved make, including applying a coat of

approved fire resistant primer or powder coating not less than

30 micron etc all complete as per direction of Engineer-in-charge

(panelling to be paid for seperately).

CHANDRESH KUMAR

DESCRIPTION OF ITEM

DSR- DSR NS AMOUNT DSR AMOUNT

S.N. QUANTITY UNIT

2021 Rates(Rs) Rates(Rs) ITEM(Rs) [M.R. ITEM](Rs)

Providing and fixing glazing in fire resistant door shutters, fixed

panels & partitions etc., with G.I. beading made out of 1.6 mm

thick G.I. sheet (zinc coating not less than 120 gm/m²) of size

20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75

mm from the edges and150 mm c/c , including applying a coat

of approved fire resistant primer/powder coating of not less than

30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm

size etc complete in all respect as per NBC 2016, IS 16231 (Part

3):2016 and as per direction of Engineer-incharge with glass of

required thickness having 120 minutes of fire resistance both

integrity & radiation control (EW120) and minimum 20minutes of

insulation (EI20). The manufacturer have to give test

report/certification of fire glass and the glass should have the

stamp showing the value of E, EW & EI. The glass shall be tested

in approved NABL accredited lab or by any other accreditation

body which operates in accordance with ISO/IEC 17011 and

accredits labs as per ISO/IEC 17025 for testing and calibration

scopes shall be eligible. The maximum glazing size shall not be

more than 1100x2200 mm (w x h) or 2.42 sqm.

Note: Rate of hardware items deemed to be include in above

items. All Hardware required as per approved shop drawing

should pass European certificate "CE" of conformity / UL with

required fire ratings.

Providing and fixing bright /matt finished Stainless Steel handles

37 9.165.1 of approved quality & make with necessary screws etc all 26.000 NOS 103.82 2,699.40

complete. (a) 125 mm.

Providing & fixing Stainless steel (grade SS-304 or higher)

38 M.R. sliding door bolt/aldrop of size 250x16mm on door shutter 13.000 NOS 719.00 9,347.00

including all accessories as per direction of E/I

Providing and fixing Stainless steel (grade SS-304 or higher)

39 tower bolt (barrel type) with necessary screws etc. complete all

work as per direction of E/I

Filling the gap in between aluminium frame & adjacent RCC/

Brick/ Stone work by providing weather silicon sealant over

40 21.8.1 backer rod of approved quality as per architectural drawings and 351.400 RM 88.11 30,962.80

direction of Engineer-in-charge complete.

Upto 5mm depth and 5 mm width

Steel work in built up tubular (round, square or rectangular

hollow tubes etc.) trusses etc., including cutting, hoisting, fixing

41 10.16.1 in position and applying a priming coat of approved steel primer, 2000.00 KG 160.10 3,20,203.08

including welding and bolted with special shaped washers etc.

Hot finished welded type tubes

Designing, Providing, installing and fixing factory finished

design pregalvanized high tensile steel joists manufactured from

42 26.62 G350 Z275 confirming to IS:277-1992, minimum coating of 50.00 KG 146.20 7,309.99

galvanizing 275 gm/sqm, minimum yield stress 35 MPa &

minimum tensile strength of 380 MPa placed 1.23 metre apart to

support the load of slab etc as per the design & directions of

Engineer-in-Charge.

Steel work welded in built up sections/ framed work, including

cutting, hoisting, fixing in position and applying a priming coat of

43 10.25.2 approved steel primer using structural steel etc. as required. 865.15 KG 147.08 1,27,244.91

In gratings, frames, guard bar, ladder, railings, brackets,

gates and similar works

Providing and fixing stainless steel ( Grade 304) railing made of

Hollow tubes, channels, plates etc., including welding, grinding,

buffing, polishing and making curvature (wherever required) and

fitting the same with necessary stainless steel nuts and bolts

44 10.28 complete, i/c fixing the railing with necessary accessories & 1274.570 KG 632.81 8,06,559.82

stainless steel dash fasteners , stainless steel bolts etc., of

required size, on the top of the floor or the side of waist slab

with suitable arrangement as per approval of Engineer-in-

Chequerred precast cement concrete tiles 22 mm thick in

footpath & courtyard, jointed with neat cement slurry mixed with

pigment to match the shade of tiles, including rubbing and

45 11.20.2 cleaning etc. complete, on 20 mm thick bed of cement mortar 96.050 SQM 1198.95 1,15,159.42

1:4 (1 cement: 4 coarse sand). Medium shade pigment using

50% white cement 50%

Marble stone flooring with 18 mm thick marble stone, as per

sample of marble approved by Engineer-in-charge, over 20 mm

46 11.23 (average) thick base of cement mortar 1:4 (1 cement : 4 coarse

sand) laid and jointed with grey cement slurry, including rubbing

and polishing complete with :

52 mm thick cement concrete flooring with concrete hardener

topping, under layer 40 mm thick cement concrete 1:2:4 (1

cement : 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) and top layer 12 mm thick cement hardener

consisting of mix 1:2 (1 cement hardener mix : 2 graded stone

47 11.4 aggregate 6 mm nominal size) by volume, hardening compound 731.250 SQM 884.64 6,46,893.82

mixed @ 2 litre per 50 kg of cement or as per manufacturer's

specifications. This includes cost of cement slurry, but excluding

the cost of nosing of steps etc. complete.

CHANDRESH KUMAR

DESCRIPTION OF ITEM

DSR- DSR NS AMOUNT DSR AMOUNT

S.N. QUANTITY UNIT

2021 Rates(Rs) Rates(Rs) ITEM(Rs) [M.R. ITEM](Rs)

Cement plaster skirting up to 30 cm height, with cement mortar

48 11.6 1:3 (1 cement : 3 coarse sand), finished with a floating coat of

Providing and fixing 1st quality ceramic glazed floor tiles

conforming to IS : 15622 (thickness to be specified by the

manufacturer ) of approved make in all colours, shades except

burgundy, bottle green, black of any size as approved by

49 11.37A Engineer-in-Charge in skirting, risers of steps and dados over 12 110.800 SQM 970.01 1,07,477.64

mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand)

and jointing with grey cement slurry @ 3.3kg per sqm including

pointing in white cement mixed with pigment of matching shade

Providing and laying vitrified floor tiles in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS: 15622, of

50 11.41.2 approved make, in all colours and shades, laid on 20mm thick 97.220 SQM 1464.22 1,42,351.58

cement mortar 1:4 (1 cement : 4 coarse sand), jointing with

grey cement slurry @ 3.3kg/sqm including grouting the joints

with white cement and matching pigments etc., complete. (a)

Size of Tile 600x600 mm

Providing and laying Vitrified tiles in floor in different sizes

(thickness to be specified by the manufacturer) with water

absorption less than 0.08% and conforming to IS:15622, of

approved brand & manufacturer, in all colours and shade, laid

on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand)

jointing with grey cement slurry @3.3 kg/sqm including grouting

51 11.41A the joints with white cement and matching pigments etc. The

tiles must be cut with the zero chipping diamond cutter only.

Laying of tiles will be done with the notch trowel, plier, wedge,

clips of required thickness, leveling system and rubber mallet for

placing the tiles gently and easily.

11.41A.1 Double charge vitrified tile polished finish of size

Providing and laying Vitrified tiles in different sizes (thickness to

be specified by manufacturer), with water absorption less than

0.08 % and onforming to I.S. 15622, of approved make, in all

52 11.46.2 colours & shade, in skirting, riser of steps, over 12 mm thick bed 13.290 SQM 1515.75 20,144.25

of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with

grey cement slurry @ 3.3kg/sqm including grouting the joint

with white cement & matching pigments etc. complete. Size of

Tile 600x600 mm

Providing and laying flamed finish Granite stone flooring in

required design and patterns, in linear as well as curvilinear

portions of the building all complete as per the architectural

drawings with 18 mm thick stone slab over 20 mm (average)

thick base of cement mortar 1:4 (1 cement : 4coarse sand) laid

53 11.55.1 and jointed with cement slurry and pointing with white cement 40.39 SQM 2676.87 1,08,118.73

slurry admixed with pigment of matching shade including

rubbing, curing and polishing etc. all complete as specified and

as directed by the Engineer-in-Charge :Flamed finish granite

stone slab Jet Black, Cherry Red, Elite

Brown, Cat Eye or equivalent.

Providing and laying Polished Granite stone flooring in required

design and patterns, in linear as well as curvilinear portions of

the building all complete as per the architectural drawings with

18 mm thick stone slab over 20 mm (average) thick base of

cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed

54 11.56.1 with cement slurry and pointing with white cement slurry 65.07 SQM 4040.06 2,62,886.54

admixed with pigment of matching shade including rubbing,

curing and polishing etc. all complete as specified and as

directed by the Engineer-in-Charge.

Polished Granite stone slab colour of Black, Cherry/Ruby Red or

Providing and laying C.C. pavement of mix M-25 with ready

mixed concrete from batching plant. The ready mixed concrete

shall be laid and finished with screed board vibrator , vacuum

dewatering process and finally finished by floating, brooming

with wire brush etc. complete as per specifications and directions

55 16.75 of Engineer-incharge. 40.17 CUM 8555.51 3,43,674.84

(The panel shuttering work shall be paid for separately).

(Note:- Cement content considered in this item is @ 330

Excess/less cement used as per design mix is payable/

recoverable separately).

Providing and fixing false ceiling at all height including providing

and fixing of frame work made of special sections, power

pressed from M.S. sheets and galvanized with zinc coating of

120 gms/sqm (both side inclusive) as per IS : 277 and consisting

of angle cleats of size 25 mm wide x 1.6 mm thick with flanges

of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long

56 with 6mm dia bolts, other flange

of cleat fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size and other end

of angle hanger fixed with intermediate G.I. channels 45x15x0.9

mm running at the spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick bottom wedge of 80 mm

with tapered flanges of 26 mm each having lips of 10.5 mm, at

450 mm centre to centre, shall be fixed in a direction

perpendicular to G.I. intermediate channel

CHANDRESH KUMAR

DESCRIPTION OF ITEM

DSR- DSR NS AMOUNT DSR AMOUNT

S.N. QUANTITY UNIT

2021 Rates(Rs) Rates(Rs) ITEM(Rs) [M.R. ITEM](Rs)

with connecting clips made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing perimeter channels

0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm

long, the perimeter of ceiling fixed to wall/partition with the help

of rawl plugs at 450 mm centre, with 25mm long dry wall screws

@ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of

size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing

to a flush finish of tapered and square edges of the board with

recommended jointing

compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two

coats of primer suitable for board, all as per manufacturer's

specification and also including the cost of making openings for

light fittings, grills, diffusers, cutouts made with frame of

perimeter channels suitably fixed, all complete as per drawings,

specification and direction of

the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board

12.45.1 conforming to IS: 2095- (Part I) :2011 (Board with BIS 345.62 SQM 1184.43 4,09,367.78

certification marks)

Providing and fixing tiled false ceiling of specified materials of

size 595x595 mm in true horizontal level, suspended on inter

metal grid of hot dipped galvanized steel sections ( galvanized @

120 grams/ sqm, both side inclusive) consisting of main "T"

with suitably spaced joints to get required length and of size

24x38 mm made from 0.30 mm thick (minimum) sheet, spaced

at 1200 mm center to center and cross "T" of size 24x25 mm

made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced

between main "T" at 600 mm center to center to form a grid of

1200x600 mm and secondary cross "T" of length 600 mm and

size 24x25 mm made of 0.30 mm thick (minimum) sheet to be

interlocked at middle of the 1200x600 mm panel to form grids of

57 600x600 mm and wall angle of size 24x24x0.3 mm and laying

false ceiling tiles of approved texture in the grid including,

required cutting/making, opening for services like diffusers,

grills, light fittings, fixtures, smoke detectors etc. Main "T"

runners to be suspended from ceiling using GI slotted cleats of

size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and

50 mm long dash fasteners, 4 mm GI adjustable rods with

galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced

at 1200 mm center to center along main T, bottom exposed

width of 24 mm of all T-sections shall be pre-painted with

polyester paint, all complete for

all heights as per specifications, drawings and as directed by

Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles

of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made

12.52.1 of G I sheet having galvanizing of 100 gms/sqm (both sides 65.58 SQM 1645.15 1,07,888.89

inclusive) and electro statically polyester powder coated of

thickness 60 microns

(minimum), including factory painted after bending.

12mm cement plaster in single coat on fair side of single or half

brick wall for exterior plastering up to floor two level including

58 13.4.2 internal rounded angles chamfers, and/or rounded angles not 1289.660 SQM 304.23 3,92,358.77

exceeding 80mm in girth and finished even and smooth no extra

for mixing any additive. 1:6 (1 cement: 6 coarse sand)

15 mm cement plaster on the rough side of single or half brick

wall of mix : 1:6 (1 cement: 6 coarse sand)

60 13.16.1 6 mm cement plaster on celling (a) 1:3(1 cement:3 fine sand) 805.820 SQM 261.55 2,10,760.14

Finishing walls with textured exterior paint of required shade:

61 13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over 1289.660 SQM 253.23 3,26,576.86

and including priming coat of exterior primer applied @

Finishing walls with 100% Premium acrylic emulsion paint having

VOC less than 50 gm/litre and UV resistance as per IS

62 13.48A 15489:2004, Alkali & fungal resistance, dirt resistance exterior

paint of required shade (Company Depot Tinted) with silicon

New work (Two or more coats applied @ 1.43 litre/ 10 sqm.

13.48A.1 Over and including priming coat of exterior primer applied @ 105.914 SQM 159.64 16,907.65

0.90 litre/10 sqm.

63 13.50 Applying priming coat:

With ready mixed red oxide zink chromate primer of approved

13.50.3 brand and manufacture on steel galvanised iron/steel works. 905.990 SQM 57.36 51,970.93

Wall painting with acrylic emulsion paint of approved brand and

manufacture to give an even shade :

13.60.1 Two or more coats on new work. 3173.670 SQM 142.48 4,52,181.34

Painting with synthetic enamel paint of approved brand and

manufacture to give an even shade:

13.61.1 Two or more coats on new work. 905.990 SQM 135.86 1,23,091.51

Providing and applying white cement based putty of average

66 13.80 thickness 1 mm, of approved brand and manufacturer, over the 4463.330 SQM 128.01 5,71,345.89

plastered wall surface to prepare the surface even and smooth

K ALUMINIUM WORK

CHANDRESH KUMAR

DESCRIPTION OF ITEM

DSR- DSR NS AMOUNT DSR AMOUNT

S.N. QUANTITY UNIT

2021 Rates(Rs) Rates(Rs) ITEM(Rs) [M.R. ITEM](Rs)

Providing and fixing aluminium work for doors, windows,

ventilators and partitions with extruded built up standard tubular

sections/ appropriate Z sections and other sections of approved

make conforming to IS: 733 and IS: 1285, fixing with dash

fasteners of required dia and size, including necessary filling up

the gaps at junctions, i.e. at top, bottom and sides with

67 21.1 required EPDM rubber/neoprene gasket etc. Aluminium sections

shall be smooth, rust free,straight, mitred and jointed

mechanically wherever required includingcleat angle, Aluminium

snap beading for glazing / paneling, C.P.brass / stainless steel

screws, all complete as per architecturaldrawings and the

directions of Engineer-in-charge. (Glazing, panelingand dash

fasteners to be paid for separately) :

21.1.1 For fixed portion

Anodised aluminium (anodised transparent or dyed to required

21.1.1.1 shade according to IS: 1868, Minimum anodic coating of grade 277.440 KG 448.52 1,24,437.96

For shutters of doors, windows & ventilators including

providing and fixing hinges/ pivots and making provision

21.1.2 for fixing of fittings wherever required including the cost

of EPDM rubber / neoprene gasket required (Fittings

shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required

shade according to IS: 1868, Minimum anodic coating of grade

Providing and fixing glazing in aluminium door, window,

ventilator shutters and partitions etc. with EPDM rubber /

68 21.3 neoprene gasket etc. complete as per the architectural drawings

and the directions of engineer-in-charge . (Cost of aluminium

snap beading shall be paid in basic item):

With float glass panes of 8 mm thickness (weight not

L Water Proofing

Providing and laying in situ seven course water proofing

treatmentwith APP (Atactic poly-propylene) modified Polymeric

memberane over roof consisting of first coat of bitumen primer

@ 0.40 litre per sqm, 2nd, 4th & 6th courses of bonding material

@ 1.20 Kg/sqm, which shall consist of blown type bitumen of

grade 85/25 conforming to IS : 702, 3rd and 5th layers of

roofing membrane APP modified Polymeric membrane 1.5 mm

thick of 2.25 Kg/sqm weight consisting of five layers

69 14.86 prefabricated with centre core as 20 micron HMHDPE film 58.000 SQM 635.65 36,867.80

sandwiched on both sides with polymeric mix and the polymeric

mix is protected on both side with 20 micron HMHDPE film. 7th,

the top most layer shall be finished with brick tiles of class

designation 10 grouted with cement mortar 1:3 (1cement : 3

fine sand) mixed with 2% integral water proofing compound by

weight of cement over a 12 mm layer of cement mortar 1:3 (1

cement : 3 fine sand) and finished neat (item of laying brick tiles

shall be paid for separately).

Providing and laying brick tiles over mumty roofs, grouted with

cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of

70 integral water proofing compound by weight of cement, over 12

mm layer of cement mortar 1:3 (1 cement : 3 fine sand) and

With common burnt clay F.P.S. (non modular) brick tiles

of class designation 10

M Roof Sheeting

Providing and Fixing High Quality SELF SUPPORTING Roof

system with 1.3 mm thick Colour coated galvalume Sheet, all

work shall be executed as per technical specification and WITH

71 MR PROPER DRAINAGE SYSTEM AS per direction of E/I 782.17 SQM 3256.00 25,46,732.50

Note: Approval of Shop drawing has to be taken from EIC before

Providing wood work in frames of false ceiling, partitions etc.

72 9.3 sawn and fixed in position with necessary stainless steel screws

9.3.2 Kiln seasoned and chemically treated hollock wood 0.183 Cum 66492.48 12,168.12

Providing and fixing cup board shutters 25 mm thick, with Pre-

laminated flat pressed three layer particle board or graded wood

particle board IS: 12823 marked, exterior grade (Grade l Type

ll), having one side decorative lamination and other side

balancing lamination, including IInd class teak wood lipping of 25

mm wide x12 mm thick with necessary screws and bright

finished stainless steel piano hinges, complete as per direction of

the Engineer-in-Charge

Providing and fixing Pre-laminated medium density fibre board

IS: 14587:1998 marked, with one side decorative lamination

other side balancing lamination Grade-I (exterior grade) in

74 9.157 shelves with screws and fittings wherever required, edges to be

sealed with PVC edge bending tape 2.00 mm thick of approved

brand (fittings to be paid separately).

Pre-laminated with decorative lamination one side and other side

9.157.1 balancing lamination exterior Grade - I MDF Board 18 mm thick 20.000 Sqm 1303.03 26,060.69

confirming to IS:14587

Providing and fixing magnetic catcher of approved quality in

75 9.114 cupboard / ward robe shutters, including fixing with necessary

screws etc. complete.

9.114.2 Double strip (horizontal type) 26.000 Each 35.30 917.72

CHANDRESH KUMAR

DESCRIPTION OF ITEM

DSR- DSR NS AMOUNT DSR AMOUNT

S.N. QUANTITY UNIT

2021 Rates(Rs) Rates(Rs) ITEM(Rs) [M.R. ITEM](Rs)

Providing and fixing 18 mm thick gang saw cut, mirror polished,

premoulded and prepolished, machine cut for kitchen platforms,

vanity counters, window sills, facias and similar locations of

required size, approved shade, colour and texture laid over 20

76 8.2 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand),

joints treated with white cement, mixed with matching pigment,

epoxy touch ups, including rubbing, curing, moulding and

polishing to edges to give high gloss finish etc. complete at all

8.2.2 Granite of any colou and shade

8.2.2.2 Area of slab over 0.5 sqm 9.594 Sqm 4573.95 43,882.51

Providing & Fixing decorative high pressure laminated sheet of

plain /wood grain in gloss / matt/ suede finish with high density

77 9.127.1 protective surface layer and reverse side of adhesive bonding 27.956 Sqm 789.66 22,075.60

quality conforming to IS : 2046 Type S, including cost of

adhesive of approved quality 1 mm thick

Providing and fixing wooden moulded beading to door and

78 9.40.2.2 windowframes with iron screws, plugs and priming coat on

unexposed surfaceetc. complete :

Kiln seasoned and chemically treated hollock wood 50x20mm 87.400 meter 189.20 16,535.80

Providing and fixing special quality chromium plated brass

79 9.90.2 cupboard locks with six levers of approved quality including 13.000 Each 295.91 3,846.88

necessary screws etc. complete. Size 50mm

Providing and fixing chromium plated brass handles with

necessary screws etc. complete: 100mm

Providing & fixing at all heights, levels and locations Mill finish

Aluminium alloy roofing sheets of alloy IS designation 31500,

temper Hx8 conforming to IS 737 and dimensions as per IS code

2676 with characteristics of good formability and corrosion

resistance. The profile sheets shall be fixed to truss members in

81 12.64 slope or required pitch or curvature with Hex cap headed self

drilling/tapping Stainless steel screws M6, 50

mm long with 3 mm EPDM seal washer etc. all inclusive of

labour, scaffolding, T&P and sundries etc. complete as per

directions of the Engineer-In-Charge. (Cost of truss/frame work

shall be paid separately).

0.56mm Aluminium profile with center to center pitch of 175

mm, depth of 46mm, top crest width of 41mm, bottom valley 25.000 Sqm 1241.54 31,038.41

width of 80mm, overall profile width of 1144mm, cover width

Providing and fixing of Pre-coated colour or mill finish

Aluminium Roofing Accessories in 0.71 mm thickness ,Alloy

31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO

82 12.66 designation)] For color, coating shall be 5-7 microns epoxy

primer on both sides of the sheet and polyester top coat 15-18

microns, using self drilling/tapping SS screws of size 6 x 50mm

with 3mm thick EPDM seal and SS plain washer complete

Precoated/mill finish aluminium Flashings/ Aprons

12.66.3 Precoated/mill finish aluminium North light curves 32.000 meter 1004.17 32,133.59

Providing and laying integral cement based water proofing

83 22.7 treatmentincluding preparation of surface as required for

treatment of roofs,balconies, terraces etc consisting of following

Applying a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with water proofing compound conforming to

a IS. 2645 and approved by Engineer-in-charge over the RCC slab

including adjoining walls upto 300 mm height including cleaning

the surface before treatment.

Laying brick bats with mortar using broken bricks/brick bats 25

mm to 115 mm size with 50% of cement mortar 1:5 (1 cement :

5 coarse sand) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineerin- charge

over 20 mm thick layer of cement mortar of mix 1:5 (1 cement

:5 coarse sand ) admixed with water proofing compound

conforming to IS : 2645 and approved by Engineerin- charge to

required slope and treating similarly the adjoining

walls upto 300 mm height including rounding of junctions of

walls and slabs.

After two days of proper curing applying a second coat of

cement slurry using 2.75 kg/ sqm of cement admixed with water

c proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge.

Finishing the surface with 20 mm thick jointless cement mortar

of mix 1:4 (1 cement :4 coarse sand) admixed with water

proofing compound conforming to IS : 2645 and approved by

Engineer-in-charge including laying glass fibre cloth of approved

quality in top layer of plaster and finally finishing the surface

with trowel with neat cement slurry and making pattern of

300x300 mm square 3 mm deep.

The whole terrace so finished shall be flooded with water for a

minimum period of two weeks for curing and for final test.“All

e above operations to be done in order and as directed and

specified by the Engineer-in-Charge :

With average thickness of 120 mm and minimum

thickness at khurra as 65 mm.

Providing and fixing M.S. grills of required pattern in frames of

windows etc. with M.S. flats, square or round bars etc. including

84 9.48 priming coat with approved steel primer all complete.

9.48.1 Fixed to steel windows by welding 48.000 kg 187.08 8,979.74

CHANDRESH KUMAR

DESCRIPTION OF ITEM

DSR- DSR NS AMOUNT DSR AMOUNT

S.N. QUANTITY UNIT

2021 Rates(Rs) Rates(Rs) ITEM(Rs) [M.R. ITEM](Rs)

Providing and fixing carbon steel galvanised ( minimum coating

5 micron) dash fastener of 10 mm dia double threaded 6.8 grade

(yield strength 480 N/mm2), counter sunk head, comprising of

85 10.27 10 mm dia polyamide

PA 6 grade sleeve, including drilling of hole in frame , concrete/

masonry, etc. as per direction of Engineer-in-charge.

Line marking for sports with latest marking equipment as per

requirement of NVS in MP Hall, all complete 1 Job 1,00,000.00 1,00,000.00

Providing and fixing circular/ Hexagonal cast iron or M.S. sheet

box for ceiling fan clamp, of internal dia 140 mm, 73 mm height,

top lid of 1.5 mm thick M.S. sheet with its top surface hacked for

87 10.18 proper bonding, top lid shall be screwed into the cast iron/ M.S. 1,914.20

sheet box by means of 3.3 mm dia round headed screws, one

lock at the corners. Clamp shall be made of 12 mm dia M.S. bar

bent to shape as per standard drawing.

CIVIL WORK FINAL AMOUNT 2,70,06,659.00 26,66,999.00

CHANDRESH KUMAR

SUMMARY SHEET FOR PLUMBING WORKS INTERNAL &

SL No. DSR 2021 NS

I INTERNAL Works

A Sub head-I: SANITARY FIXTURES & FITTINGS 3,26,312.11 70,944.00

B SUB HEAD-II- SOIL , WASTE VENT AND RAIN WATER PIPE 49,454.32 1,67,219.10

C SUB HEAD- III - INTERNAL WATER SUPPLY 1,96,020.36 16,854.00

II EXTERNAL WORKS

A SUB HEAD- IV EXTERNAL SEWARAGE LINE 3,64,529.48 -

B SUB HEAD-V -EXTERNAL WATER SUPPLY 33,222.36 40,000.00

Digitally signed by

CHANDRESH KUMAR

BOQ FOR INTERNAL & EXTERNAL PLUMBING WORKS

DSR Rates(Rs) Amount(Rs)

S.N 2021/NSI Description QTY Unit

ITEM CODE DSR NS DSR 2021 NS AMOUNT

A. SUB HEAD -I : SANITARY FIXTURES & FITTINGS

Providing and Fixing white viterous china pedestal type

water closet ( European type WC Pan ) with seat and lid ,

10 litre low level White pvc flushing cistern , including flush

pipe with manually controlled device ( handle lever ) ,

Conforming to IS : 7231 with all fittings and fixtures

complete including cutting and making good the walls and

floors wherever required . WC Pan with ISI marked white

solid plastic seat and lid . 13 Each 5,726.60 74,445.82

Providing and fixing wash basin with C.I. brackets, 15 mm

C.P. brass pillar taps, 32 mm C.P. brass waste of standard

2 DSR -17.7 pattern, including painting of fittings and brackets, cutting

and making good the walls wherever require :

White Vitreous China Wash basin size 630x450 mm with a

pair of 15 mm C.P. brass pillar tap 7 Each 2,351.39 16,459.76

Providing and fixing 600x450 mm beveled edge mirror of

superior glass ( of approved quality ) complete with 6 mm

thick hard board ground fixed to wooden cleats with C.P

brass screws and washers complete . 7 Each 1,458.54 10,209.75

Providing and fixing white vitreous china flat back half stall

urinal of size 580x380x350 mm with white PVC automatic

flushing cistern, with fittings, standard size C.P. brass flush

4 17.5 pipe, spreaders with unions and clamps (all in C.P. brass)

with waste fitting as per IS : 2556, C.I. trap with outlet

grating and other couplings in C.P. brass, including painting

of fittings and cutting and making good the walls and floors

wherever required :

4.1 17.5.3 Range of three half stall urinals with 10 litre P.V.C.

automatic flushing cistern 3 Each 19,169.24 57,507.72

Providing and fixing stone slab with table rubbed, edges

rounded and polished, of size 75x50 cm deep and 1.8 cm

thick, fixed in urinal partitions by cutting a chase of

appropriate width with chase cutter and embedding the

5 DSR -8.10 stone in the chase with epoxy grout or with cement

concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone

aggregate 6 mm nominal size) as per direction of Engineer-

in-charge and finished smooth.

5.1 8.10.2 Granite Stone of approved shade 3 Sqm 3,661.82 10,985.46

Providing & fixing C.P. brass bib cock of approved quality

conforming to IS :8931.

Providing and fixing CP Brass 32mm size bottle trap of

7 17.22A approved quality & make and as per the direction of

engineer in charge. 10 Each 916.01 9,160.10

Providing and fixing C.P. brass angle valve for basin mixer

8 DSR -18.53 and geyser points of approved quality conforming to

Providing and fixing unplasticised P.V.C. connection pipe

9 DSR -18.21 with PTMT Nuts, collar and bush of approved quality and

9.1 18.21.2.1 15 mm nominal bore with 45cm length 44 Each 88.06 3,874.68

Providing and fixing CP Brass extension nipple ( size 15mm x 50 mm ) of approved make and quality as per direction of engineer - in - charge .

Providing & fixing of Waste pipe for Wash basins & Sinks

11 DSR -17.28 including pvc waste fittings complete.

11.1 17.28.2 Flexible Pipe

Providing and placing on terrace (at all floor levels)

polyethylene water storage tank, ISI : 12701 marked, with

12 DSR -18.48 cover and suitable locking arrangement and making

necessary holes for inlet, outlet and overflow pipes but

without fittings and the base support for tank.

Providing and fixing PTMT grating of approved quality and

Fixing, testing and commissioning health faucet in PVC

Flexible tube with wall hook,(spray unit, flexible hose and

NS-1 will be supplied) a)mone number PVC Flexible tube of 1.5m

length fitted with wall flange: b) hand operated spray

14.00 unit(instant type) 9 Each 1,885.00 16,965.00

Digitally signed by

BOQ FOR INTERNAL & EXTERNAL PLUMBING WORKS

DSR Rates(Rs) Amount(Rs)

S.N 2021/NSI Description QTY Unit

ITEM CODE DSR NS DSR 2021 NS AMOUNT

Providing and fixing vertical or horizontal storage type hot

water heater electrical operated fixed to wall with anchor

bolts & nuts, 15mm CP brass angle stop cock and 15mm CP

15.00 NS-2 brass non-return valve complete including making

connections with 15mm dia CP connecting pipes on inlet

and outlet, suitable length of power cable and 15 amps plug

a) 15 Litre Capacity 3 Each 12,081.00 36,243.00

16 17.34 Providing and fixing toilet paper holder :

Providing and fixing PTMT liquid soap container 109 mm

wide, 125 mm high and 112 mm distance from wall of

17 17.71 standard shape with bracket of the same materials with

snap fittings of approved quality and colour, weighing not

less than 105 gms. 5 Each 151.21 756.06

Providing and fixing CP brass long boby bib cock of

18 18.51 approved quality conforming to IS standards and weighing

not less than 690gms

18.51.1 15mm nominal bore 6 Each 732.19 4,393.13

Providing & Fixing of Grab bar size 600X600 mm pipe O.D

thiickness 2.5 mm of non slipping grip as per standard

specification of use in disabled toilet complete with brackets 1 each 17,736.00 17,736.00

TOTAL AMOUNT SUB-HEAD-I 3,26,312.11 70,944.00

TOTAL AMOUNT SUB-HEAD-I 3,26,312.11 70,944.00

SUB HEAD-II- SOIL , WASTE VENT AND RAIN WATER

Making khurras 45x45 cm with average minimum thickness

of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4

graded stone aggregate of 20 mm nominal size) over P.V.C.

1 DSR -12.22 sheet 1 mx1 mx400 micron, finished 12 mm cement plaster

1:3 (1 cement:3 coarse sand) and a coat of neat cement

rounding the edges and making and finishing the outlet

complete 4 Each 275.55 1,102.21

Providing and Fixing on wall unplasticised Rigid PVC Rain

water pipes conforming to IS : 13592 Type A , including

2 DSR -12.41 jointing with seal ring conforming to IS : 5382 , leaving 10

mm gap for thermal expansion

2.1 12.41.2 Single Socketed pipes 110 mm diameter 82 Metre 330.49 27,099.95

Providing and Fixing to the inlet mouth of rain water pipe

3 DSR -12.44 cast iron grating 15 cm diameter and weighing not less

than 440 grams .

Providing and Fixing 100 mm diameter and 60 cm long rain

4 DSR -12.37 water spout in cement mortar 1:4 ( 1 Cement : 4 Fine Sand

4.1 12.37.1 Stone Ware Spout 4 Each 146.87 587.49

Providing and Fixing on wall face Rigid Unplasticised UPVC

moulded fittings / accessories for unplasticised Rigid PVC

5 DSR -12.42 Rain water pipes conforming to IS : 13592 Type A including

jointing with seal ring conforming to IS : 5382 leaving 10

mm gap for thermal expansion .

12.42.1 Coupler

12.42.2 Single Push Fit Coupler

12.42.3 Single Tee with door

12.42.4 Single Tee without door

12.42.5 Bend 87.5 degree

12.42.6 Shoe ( Plain )

Providing and Fixing unplasticised PVC pipe clips of

approved design to unplasticised - PVC rain water pipes by

means of 50x50x50 mm hard wood plugs , screwed with

6 DSR -12.43 MS screws of required length , including cutting brick work

with fixing in cement mortar 1:4 ( 1 Cement : 4 Coarse

Sand ) and making good the wall etc . complete

Digitally signed by

BOQ FOR INTERNAL & EXTERNAL PLUMBING WORKS

DSR Rates(Rs) Amount(Rs)

S.N 2021/NSI Description QTY Unit

ITEM CODE DSR NS DSR 2021 NS AMOUNT

Providing and fixing uPVC 6 Kg/cm2 Soil , Waste & RWP

pipes (IS: 13592 Class B) including all fittings (plain or

door) e.g. bends, junction, cowls, offsets, access pieces,

jointing with rubber ring/solvent cement joints including

cutting chase or holes in walls and floors and making good

wherever required.

Providing & fixing in position upvc P"or S" trap of self

cleaning design of following sizes for the embedded areas

Making proper connection with chemical sealent joint ,

8 NS-2 cutting chase / hole in floors /slabs and bringing the same

in proper condition in cement concrete 1:2:4 mix complete

as required. including cost of cutting and making good the

walls and floors where required.

8.1 a) 110 mm inlet and 110 mm outlet 9 Each 734.00 6,606.00

Providing & fixing in position upvc floor drain including cost

9 NS-3 of cutting and making good the walls and floors wherever

9.1 a) 110 mm inlet and outlet 8 Each 451.00 3,608.00

Providing and fixing uPVC waste pipes for WB , SINK ,

URINAL , FD (IS: 4985 ) 6 Kg / Sqcm including all fittings

(plain or door) e.g. bends, junction, cowls, offsets, access

10 NS-4 pieces, jointing with rubber ring/solvent cement joints

including cutting chase or holes in walls and floors and

making good wherever required.

Providing and fixing Cast bronze chrome plated grating with

11 ring and Stainless steel anti cockroach basket and two SS

screw including fixing to the floor with cement mortar.

Providing and fixing UPVC inlet fitting with maximum 3

inlets 32,40 or 50 mm size fabricated from 110 mm dia

12 NS-6 UPVC pipes and fixed to upvc sockets,fixed to upvc trap

with chemical sealent joint and set in cement concrete as

per standard drawing complete. 1 Each 4682 4,682.00

Providing and fixing upvc cleanout plug( Ceiling or Floor)

with suitable insert keys for opening, male threaded joint

with upvc socket fixed to uPVC pipe complete in all

13.1 a) 110 mm diameter Pipe 2 Each 538.00 1,076.00

b) 75mm dia pipe 2 Each 495.00 990.00

TOTAL OF SUB-HEAD-II

C. SUB HEAD- III - INTERNAL WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

fixing the pipe with clamps at 1.00 m spacing. This includes

1 DSR -18.8 jointing of pipes & fittings with one step CPVC solvent

cement and the cost of cutting chases and making good the

same including testing of joints complete as per direction

of Engineer in Charge.

Concealed work, including cutting chases and making good

1.1 18.8.1 15 mm nominal outer dia Pipes 90 Metre 455.96 41,036.74

1.2 18.8.2 20 mm nominal outer dia Pipes 69 Metre 531.00 36,639.12

1.3 18.8.3 25 mm nominal outer dia Pipes 50 Metre 647.07 32,353.64

1.4 18.8.4 32 mm nominal outer dia Pipes 25 Metre 736.68 18,417.10

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)

pipes, having thermal stability for hot & cold water supply,

including all CPVC plain & brass threaded fittings, including

2 DSR -18.7 fixing the pipe with clamps at 1.00 m spacing. This includes

jointing of pipes & fittings with one step CPVC solvent

cement and testing of joints complete as per direction of

Engineer in Charge.

Internal work - Exposed on wall

2.1 18.7.3 25mm nominal bore 15 Metre 421.70 6,325.51

2.2 18.7.4 32 mm nominal bore 14 Metre 517.77 7,248.81

2.3 18.7.5 40mm nominal bore 15 Metre 696.99 10,454.92

2.4 18.7.6 50mm nominal bore 17 Metre 958.13 16,288.19

3 18.16 Providing and fixing brass stop cock of approved quality :

4 18.17 Providing and fixing gun metal gate valve with CI

4.2 18.17.1A 20mm Nominal Bore 2 each 477.26 954.51

Digitally signed by

BOQ FOR INTERNAL & EXTERNAL PLUMBING WORKS

DSR Rates(Rs) Amount(Rs)

S.N 2021/NSI Description QTY Unit

ITEM CODE DSR NS DSR 2021 NS AMOUNT

Supplying ficing testing and commissioning of butterfly

valve of PN 1.6 rating with bronze/gunmetal seat duly ISI

marked complete with nuts bolts washers gaskets

conforming to IS 13095 of following sizes as required:-

Providing and fixing Thermoflex or Careflex thermal

insulation tubing, a elastomeric flexible material having

6 NS-9 hermetic blister closed cell structure of expanded synthetic

rubber over pipes of following nominal bores and thickness

including all required accessories complete as per

9 mm thick ( Pipes in Chases)

6.1 a) For 15 mm dia Pipe 15 Metre 92.00 1,380.00

6.2 b) For 20 mm dia Pipe 10 Metre 101.00 1,010.00

Providing and Fixing full way lever operated forged brass

ball valve of brass body with forged brass hard

7 NS-10 chromeplated steel ball tasted to a pressure not less than

15 kg/sqcm with threaded / flanged joints complete with

nuts, bolts, gaskets, washers etc.

7.1 a) 15mm dia nominal bore 1 Each 250.00 250.00

7.2 b) 20mm dia nominal bore 1 Each 340.00 340.00

7.3 c) 25mm dia nominal bore 1 Each 512.00 512.00

7.4 d) 32mm dia nominal bore 1 Each 774.00 774.00

7.5 e) 40 mm dia nominal bore 1 Each 1,195.00 1,195.00

Providing, fixing, testing and commissioning of motorised

butterfly valve of following dia for filling of overhead water

tank complete with high and low level control switches to

control tanks. The level controllers shall be installed in

8 NS-11 overhead tanks. The level switch will close the valve when

water level is high in overhead tank and open the valve

when overhead water tank level is low. The system should

be complete in all respects with accessories 220 V AC / 24 V

DC, IP67 electrical water level control unit, copper control

8.1 a) 40mm dia normal bore 1 Each 11,393.00 11,393.00

Providing and fixing CP Brass Single lever telephonic wall

9 17.22B mixer of quality & make as approved by Engineer in charge.

(a) 15mm Nominal Dia 2 each 6,324.63 12,649.26

Providing and fixing C.P. brass shower rose with 15 or 20

10 18.22.1 mm inlet

Providing and fixing C.P. brass stop cock (concealed) of

11 18.52 standard design and of approved make conforming to

18.52.1 15mm nominal bore 2 each 614.72 1,229.44

TOTAL OF SUB HEAD - III

SUB HEAD- IV EXTERNAL SEWARAGE LINE

Excavating trenches of required width for pipes, cables, etc

including excavation for sockets, anddressing of sides,

ramming of bottoms, depth up to 1.5 m, including getting

out the excavated soil, and then returning the soil as

1 2.1 required, in layers not exceeding 20 cm in depth, including

consolidating each deposited layer by ramming, watering,

etc. and disposing of surplus excavated soil as

directed,within a lead of 50 m :

1.1 2.10.1 All kinds of soil

Pipes, cables etc. exceeding 80 mm dia but not exceeding

Providing and fixing square-mouth S.W. gully trap class

SP-1 complete with C.I. grating brick masonry chamber

2 19.4.1.1 with water tight C.I. cover with frame of 300x300 mm size

(inside) the weight of cover to be not less than 4.50 kg and

frame to be not less than 2.70 kg as per standard design:

100x100 mm size P type. With common burnt clay F.P.S. 5 EACH 2,535.94 12,679.70

Constructing brick masonry manhole in cement mortar 1:4

( 1 cement : 4 coarse sand ) with R.C.C. top slab with

1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone

aggregate 20 mm nominal size), foundation concrete 1:4:8

mix (1 cement : 4 coarse sand : 8 graded stone aggregate

40 mm nominal size), inside plastering 12 mm thick with

3 19.7 cement mortar 1:3 (1 cement : 3 coarse sand) finished with

floating coat of neat cement and making channels in

cement concrete 1:2:4 (1 cement : 2 coarse sand : 4

graded stone aggregate 20 mm nominal size) finished with

a floating coat of neat cement complete as per standard

Inside size 90x80 cm and 45 cm deep including C.I. cover

with frame (light duty) 455x610 mm internal

3.1 19.7.1 dimensions,total weight of cover and frame to be not less

than 38 kg (weight of cover 23 kg and weight of frame 15

Digitally signed by

BOQ FOR INTERNAL & EXTERNAL PLUMBING WORKS

DSR Rates(Rs) Amount(Rs)

S.N 2021/NSI Description QTY Unit

ITEM CODE DSR NS DSR 2021 NS AMOUNT

With common burnt clay F.P.S.(non modular) bricks of class

3.1.1 19.7.1.1 designation 7.5

Constructing brick masonry road gully chamber 45x45x77.5

4 19.28 cm with bricks in cement mortar 1:4 (1 cement : 4 coarse

sand ) with precast R.C.C. vertical grating complete as per

standard design :

with common burnt clay F.P.S.(non module) brick of class

designation 7.5 10 EACH 6,468.35 64,683.50

Providing, laying and jointing glazed stoneware pipes class

5 SP-1 with stiff mixture of cement mortar in the proportion

of 1:1 (1 cement : 1 fine sand) including testing of joints

etc. complete :

Providing and laying cement concrete 1:5:10 (1 cement : 5

coarse sand : 10 graded stone aggregate 40 mm nominal

size) all-round S.W. pipes including bed concrete as per

standard design :

Providing orange colour safety foot rest of minimum 6 mm

thick plastic encapsulated as per IS : 10910, on 12 mm dia

steel bar conforming to IS: 1786, having minimum cross

section as 23 mmx25 mm and over all minimum length 263

mm and width as 165 mm with minimum 112 mm space

between protruded legs having 2 mm tread on top surface

by ribbing or chequering besides necessary and adequate

7 19.16 anchoring projections on tail length on 138 mm as per

standard drawing and suitable to with stand the bend test

and chemical resistance test as per specifications and

having manufacture's permanent identification mark to be

visible even after fixing, including fixing in manholes with

30x20x15 cm cement concrete block 1:3:6 (1 cement : 3

coarse sand : 6 graded stone aggregate 20 mm nominal

size) complete as per design.

Making connection of drain or sewer line with existing

manhole including breaking into and making good the walls,

floors with cement concrete 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm nominal size)

8 19.21 cement plastered on both sides with cement mortar 1:3 (1

cement : 3 coarse sand), finished with a floating coat of

neat cement and making necessary channels for the drain

etc. complete :

8.1 19.21.1 For pipes 100 to 250 mm diameter 1 EACH

Constructing brick masonry circular type manhole 0.91 m

internal ia at bottom and 0.56m dia at top in cement

mortar 1:4 (1 cement : 4 coarse sand), inside cement

plaster 12 mm thick with cement mortar 1:3 (1 cement : 3

coarse sand) finished with a floating coat of neat cement,

foundation concrete 1:3:6 mix (1 cement : 3 coarse sand :

6 graded stone aggregate 40 mm nominal size), and

necessary channel in cement concrete 1:2:4 (1 cement : 2

coarse sand : 4 graded stone aggregate 20 mm nominal

size) finished with a floating coat of neat cement, all

complete as per standard design :

0.91 m deep with SFRC cover and frame (heavy duty, HD-

20 grade designation) 560 mm internal diameter

to I.S. 12592, total weight of cover and frame to be not

less than 182 kg., fixed in cement concrete 1:2:4 (1 cement

: 2 coarse sand : 4 graded stone aggregate 20 mm

nominal size) including centering, shuttering all complete.

(Excavation, foot rests and 12mm thick cement plaster at

9.1.1 19.9.1.1 With common burnt clay F.P.S. (non modular) 1 EACH 12,285.60 12,285.60

TOTAL OF SUB HEAD - IV 3,64,529.48 -

SUB HEAD- V EXTERNAL WATER SUPPLY

Supplying, installing, testing and commissioning vertical on

line multi stage centrifugal pumping set with mechanical

seal, C.I. volute and SS impeller & SS shaft connected to a

TEFC induction motor of suitable HP for 415 volts, 3 phase,

50 cycles A.C. supply with 150 mm dia pressure gauge with

SS/gunmetal isolation cock, vibration eliminating pads,

base plate wiring upto panel and equipment for water level

1 MR controller to start and stop the pump automatically at

predecided levels of the water in the tank with provision of

protection for dry run etc. complete in all respect (The shop

drawing or the pumps along with its characteristics curves,

model and technical data etc. are to be submitted for

approval before purchase of pump).

Domestic water pumps (Treated water transfer pump to

Capacity 50 lpm

Providing and fixing G.I. pipes complete with G.I.

fittings and clamps, i/c cutting and making good the

Internal work - Exposed on wall

Digitally signed by

BOQ FOR INTERNAL & EXTERNAL PLUMBING WORKS

DSR Rates(Rs) Amount(Rs)

S.N 2021/NSI Description QTY Unit

ITEM CODE DSR NS DSR 2021 NS AMOUNT

Providing and fixing G.I. pipes complete with G.I.

3 18.12 fittings including trenching and refilling etc.

3.1 18.12.6 50mm dia Nominal Bore 15 RMT 676.17 10,142.52

TOTAL OF SUB HEAD - IV 33,222.36 40,000.00

Digitally signed by

SUMMARY SHEET FOR FIRE FIGHTING WORKS

SUB HEAD DESCRIPTION AMOUNT DSR AMOUNT NSI

A SUB HEAD - A : PUMPS & EQUIPMENTS 1,42,992.69 -

SUB HEAD - B : PIPING HYDRANT & ACCESSORIES

Digitally signed by

CHANDRESH KUMAR

BOQ OF FIRE FIGHTING

MP HALL Rates(Rs) AMOUNT(Rs)

S.No DSR 2022 E Description of items UNIT

&M WORKS QTY DSR NSI DSR NSI

A. SUB HEAD - A : PUMPS & EQUIPMENTS

18.4 Supplying , Installation , Testing and

Commissioning of Electric Driven Terrace Pump

Suitable for Automatic operation and Consisting of

Following Complete in all Respect as Required (

Terrace Fire Pump )

a) Horizontal Type Multistage , Centrifugal Pump of

Cast Iron Body and Bronze Impeller with Stainless

Steel Shaft Mechanical Seal Conforming to IS :

Suitable HP Squirrel cage Induction motor , TEFC ,

synchronous speed 1500 RPM , Suitable for

operation on 415 Volts 3 Phase 50 Hz AC Supply

with IP 68 protection for enclosure Horizontal Foot

Mounted type with class F insulation Conforming to

IS : 325 with Energy Efficiency class IE-3

c) MS Fabricated Common Base Plate Coupling ,

Coupling Guard Foundation bolts etc as Required

d) Suitable Cement Concrete Foundation duly Plastered

with anti vibration Pads

The Head of the Pump is Selected in a manner so as

to give a minimum 3.5 kg/sqcm pressure at the

highest / farthest point

18.20 Supplying and Fixing Air Vessel made of 450 mm

dia 8 mm thick ms sheet 2000 mm in height with air

release valve on top and flanged connection to riser

2 drain arrangement with 25 mm dia gunmetal wheel

valve with required accessories pressure gauge and

painting with synthetic enamel paint of approved

shade as required 2 Set 18856.63 37,713.27

TOTAL CARRIED TO SUMMARY SHEET FOR SUB

B. PIPING, HYDRANT , AND ACCESSORIES

18.7 Providing Laying Testing and Commissioning of C

class Heavy duty MS Pipe Conforming to IS : 1239

/ 3589 including Fittings like elbows , tees , flanges

, tapers , nuts , bolts , gaskets etc in ground

1 including welding excavation and Providing cement

concrete blocks as supports anticorrosive treatment

with coaltar / asphalts tape as per IS :10221

refilling the trench etc of following sizes complete as

18.11 Supplying Fixing Testing and Commissioning of

butterfly valve of PN 1.6 Rating with Bronze

2 Gunmetal Sheet duly ISI marked complete with

nuts , bolts , washers , gaskets conforming to IS :

13095 of following sizes as required .

18.14 Providing Installation Testing and Commissioning of

3 Non Return Valve of following sizes conforming to

IS : 5312 complete with rubber gasket , GI Bolts ,

18.15 Providing Installation Testing and Commissioning of

Stainless Steel Y Strainer fabricated out of 1.6 mm

thick stainless steel , Grade 304 , Sheet with 3 mm

dia holes with stainless steel flange .

18.9 Supplying and Fixing Single Headed Internal

Hydrant Valve with instantaneous gunmetal material

5 coupling of 63 mm dia with cast iron wheel ISI

marked conforming to IS : 5290 ( Type A ) with

blank Gunmetal material cap and chain as required .

5.1 18.9.1 Single Headed Gunmetal Material 3 Set 7902.75 23,708.26

18.13 Supplying and Fixing orifice plate made out of 6 mm

thick stainless steel ( Grade 304 ) with orifice of

required size to be fitted between flange and

6 landing valve of external and internal hydrants to

reduce pressure at the outlet to the level of 3.5 kg /

sqcm complete as required .

18.16 Supplying and Fixing 63 mm dia 15 m Long RRL

7 Hose pipe with 63 mm dia male and female coupling

duly bound with GI wire , rivet etc . Conforming to

7.1 18.16.1 Gunmetal Material 3 Set 5376.68 16,130.05

CHANDRESH KUMAR

BOQ OF FIRE FIGHTING

MP HALL Rates(Rs) AMOUNT(Rs)

S.No DSR 2022 E Description of items UNIT

&M WORKS QTY DSR NSI DSR NSI

18.17 Supplying and Fixing First aid hose reel with MS

Construction Spray painted in Post office red

conforming to IS : 884 complete with the following

20 mm nominal internal dia water hose

thermoplastic ( Textile Reinforced ) Type - 2 as per

20 mm nominal internal dia gunmetal globe valve

Drum and Brackets for fixing the equipments on

Connections from Riser with 25 mm dia stop

gunmetal valve and MS Pipe and socket

18.18 Supplying and Fixing 63 mm dia Gunmetal Short

Branch Pipe with 20 mm nominal internal diameter

9 size nozzle conforming to IS : 903 suitable for

instantaneous connection to interconnect hose pipe

coupling as required .

9.1 18.18.1 Gunmetal Material 6 Set 2497.13 14,982.78

18.22 Providing and Fixing of Pressure Switch in MS Pipe

Line including connection etc as required 1 Each 1597.91 1,597.91

NS-1 Providing and fixing of Fire Hose Cabinet size not

less than 2.1 x 1.2 x 0.90 mtr made out of M.S.

sheet not less than 1.5 mm thick having central

opening and 4 mm thick glazed glass doors (Two

nos.) suitably marked on the outside 'with the

11 letters "FIRE HOSE" including necessary locking

arrangement and painting in PO red colour suitable

to accommodate, internal hydrant valve, 2 nos 15

mtr long Hose pipe, branch pipe, nozzle and fire

man's axe. It shall be fixed inside the FHC Cabinet

Complete as required .

NS-2 Providing and fixing weather proof Fire Hose

Cabinet of size not less than 0.75 x 0.6 x 0.25 mtr

made out of M.S. sheet not less than 1.5 mm thick

having central opening and 4 mm thick glazed glass

doors (Two nos.) suitably marked on the outside

'with the letters "FIRE HOSE" including necessary

locking arrangement and painting in PO red colour

suitable to accommodate, external yard hydrant

valve, 2 nos 15 mtr long Hose pipe, branch pipe,

nozzle and fire man's axe. It shall be mounted on

boundary wall complete as required.

NS-3 Providing & fixing Controlled Percolating (CP) Hose

ISI marked (IS:8423) 63 mm dia x 15 m long

complete with instantaneous type Stainless steel 63

mm dia ISI marked Male & Female couplings

13 (IS:903) bound and riveted to hose pipe with

copper rivets and 1.5 mm copper wire.brusting

pressure not less than 22 Kg/Sqcm. ( Two nos.

for each hydrant-valve)

NS-4 Providing and fixing standard firemans axe with

heavy rubber handle. 3 Each 1467.00 4,401.00

NS-5 Providing and fixing dial type pressure gauge with

15 isolation cock and copper pipe on main header Dial

diameter 100 mm celebration 0-16 / sq. cm.

NS-6 Providing and fixing Fire Extinguishers (CO2 type

16 powder ) 4 Kg Capacity complete with all

accessories as per manufacturers

specifications. 1 Each 5647.00 5,647.00

NS-7 Providing and fixing Fire Extinguishers (A, B, C type

17 powder ) 5 Kg Capacity complete with all

accessories as per manufacturers

specifications. 14 Each 4518.00 63,252.00

TOTAL CARRIED TO SUMMARY SHEET FOR SUB

CHANDRESH KUMAR

COST SUMMARY FOR ELECTRICAL WORKS

SL No. DSR 2021 NS

I INTERNAL Works

A SUBHEAD - I - CIRCUIT CUM POINT WIRING 11,19,198.67 59,965.14

B SUBHEAD - II - FITTINGS & FIXTURES 27,385.74 5,64,160.52

C SUBHEAD - III - MAIN BOARDS - 1,90,800.00

SUBHEAD - IV - DISTRIBUTION BOARDS 90,394.84 -

II EXTERNAL WORKS

A SUBHEAD - V - EARTHING 67,131.02 16,000.00

B SUBHEAD - VI - SUPPLYING & LAYING OF CABLE 15,563.65 35,231.06

SUB HEAD -VII :EXTERNAL LIGHT 70,537.32

Digitally signed by

CHANDRESH KUMAR

BOQ OF ELECTRICAL WORKS

Rates(Rs) Amount(RS)

S.No. Item No. Description of items Unit

Qty DSR NS DSR-2022 NS

SUBHEAD - I - CIRCUIT CUM POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell

point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable in surface / recessed medium class PVC

1 DSR 1.10 conduit, with modular switch, modular plate, suitable GI box

and earthing the point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable etc. as required.

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point ( without

Independent switch etc.) with 1.5 sq. mm FRLS PVC

2 DSR-1.55 insulated copper conductor single core cable in surface/

recessed PVC conduit, and earthing the point with 1.5

sq. mm FRLS PVC insulated copper conductor single core

cable etc as required. (Switch Control Secondary

Wiring for light point/ fan point/ exhaust fan point/ call

bell point with 1.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed steel

3 DSR-1.3 conduit, with modular switch, modular plate, suitable

GI box and earthing the point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable etc. as

required. (Switch Control Primary Points)

Wiring for group controlled (looped) light point/fan

point/exhaust fan point/ call bell point (without

Independent switch etc.) with 1.5 sq. mm FRLS PVC

4 DSR-1.54 insulated copper conductor single core cable in surface/

recessed steel conduit, and earthing the point with 1.5

sq. mm FRLS PVC insulated copper conductor single core

cable etc as required. (Switch Control Secondary

MCB CONTROL LIGHT POINTS

Wiring for light point/ fan point/ exhaust fan point/ call

bell point with 2.5 sq.mm FRLS PVC insulated copper

conductor single core cable in surface / recessed steel

5 NSI-1 conduit, with modular switch, modular plate, suitable

GI box and earthing the point with 2.5 sq.mm FRLS PVC

insulated copper conductor single core cable etc. as

required. (Switch Control Primary Points)

5.1 NSI-1.1 Primary point controlled by one MCB. Point 12 1,535.50 18,426.00

Same as item above but Secondary point. i.e. Points to be

5.2 NSI-1.2 looped with Primary point with 2.5 sqmm wire and Point Point

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC

insulated copper conductor single core cable in surface/

6 DSR 1.5 recessed steel conduit alongwith 1 No. 4 sq. mm FRLS PVC Metre

insulated copper conductor single core cable for loop

earthing as required. 350 447.54 1,56,639.05

Wiring for circuit/ submain wiring alongwith earth wire with

7 DSR 1.7 the following sizes of FRLS PVC insulated copper conductor,

single core cable in surface/ recessed steel conduit as

7.1 DSR 1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 50 337.98 16,899.03

7.3 DSR 1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 100 608.78 60,877.86

7.4 DSR 1.7.5 2 x 10 sq. mm + 1 x 6 sq.mm earth wire Metre 150 733.84 1,10,076.27

7.6 DSR 1.7.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 60 1,700.24 1,02,014.35

Supplying and fixing suitable size GI box with modular plate

cover in front on surface or in recess, including providing

8 DSR 1.31 and Each

fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular

switch, connections etc. as required.

Supply and Wiring for 250 volts single phase and neutral 2

Nos 6 amps socket outlate with control by 1 No switched

with 2.5 sq.mm PVC insulated copper conductor 1100

volts grade stranded flexible FRLS wires in concealed or

surface mounted 25 mm dia 2mm thick PVC conduit

9 NSI-2 including providing and fixing of 6 amps 3 pin switch socket Each

outlet of aprpoved make and design in 2 mm thick GI box

with grid plate and earthing of third pin of the socket with

2.5 Sq. mm PVC insulated copper conductor stranded

flexible FRLS wire.(maximum four no. of switches socket

shall be connected on one circuit)

Supplying and fixing suitable size GI box with modular plate

cover in front on surface or in recess, including providing

10 DSR 1.32 and Each

fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16

modular switch, connections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing

11 DSR-1.33 junction box/ wooden block including connections etc. as Each

CHANDRESH KUMAR

Rates(Rs) Amount(RS)

S.No. Item No. Description of items Unit

Qty DSR NS DSR-2022 NS

Supplying & fixing suitable size GI box wih modular plate

and cover in front on surface or in recess i/c providing and

12 DSR-1.57 fixing 25 amp modular socket outlet and 25 Amps modular Each

SP MCB, “C” curve including connection, painting etc. as

required. (AC's & Gysers) 2 751.41 1,502.83

Supplying and fixing following modular switch/ socket on the

existing modular plate & switch box including connections

13 DSR 1.24 but

excluding modular plate etc. as required.

DSR 1.24.6 Telephone socket outlet Nos 4 152.97 611.88

Supplying and fixing following size/ modules, GI box

14 DSR 1.27 modular base & cover plate for modular switches in recess

DSR 1.27.1 1 or 2 Module (75mmX75mm) Nos 4 308.01 1,232.03

Supplying and fixing following size/ modules, GI box

15 DSR 1.24 modular base & cover plate for modular switches in recess

15.1 DSR 1.24.4 3 pin , 5/6 amps socket outlet Each 2 126.10 252.19

Supplying and fixing following size/ modules, GI box

16 DSR 1.27 modular base & cover plate for modular switches in recess

Supplying and fixing of following sizes of medium class PVC

conduit along with accessories in surface/recess including

cutting the wall and making good the same in case of

17 DSR 1.21 recessed

conduit as required.

Supplying and drawing following pair 0.5 mm dia FRLS PVC

18 1.18 insulated annealed copper conductor, unarmored telephone

cable in the existing surface/ recessed steel/ PVC conduit as

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - I

SUBHEAD - II - FITTINGS & FIXTURES

Supply, Installation, Testing and Commissioning of 9 W Bulk

Supply, Installation, Testing and Commissioning of 5W

Mirror Light. 2 1,077.79 2,155.58

Supply, Installation, Testing and Commissioning of 18W

3 NSI-3 Recessed/Surface Mounted LED circular Downlighter. Each

Supply, Installation, Testing and Commissioning of 20W

Wall/Surface mouted 4 ft. LED 15 1,975.94 29,639.10

Supply, Installation, Testing and Commissioning of 65W

Surface mounted LED Bay light. 10 6,107.46 61,074.60

Supply, Installation, Testing and Commissioning of 12W

Recessed mounted LED circular Downlighter (Cat no-Bajaj

Lighting BGSLO SLEEK SURFACE 12W WH RD or equivalent

as specified in the approved list of make) 37 1,167.60 43,201.20

Supply, Installation, Testing and Commissioning of 150W

7 NSI-7 highway with 150LPW Ceiling mounted LED Light Fixtures Each

Supply, Installation, Testing and Commissioning of 250W

8 NSI-8 Highway with 130LPW ceiling mounted LED Light Fixtures Each 16

Supply, Installation, Testing and Commissioning of 1200 mm

sweep, BEE 5 star rated, ceiling fan with Brush Less Direct

Current (BLDC) Motor, class of insulation: B, 3 nos. blades,

30 cm long down rod, 2 nos. canopies, shackle kit, safety

rope, copper winding, Power Factor not less than 0.9,

Service Value (CM/M/W) minimum 6.00, Air delivery

9 DSR 19.1 minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374- Each

2019), THD less than 10%, remote or electronic regulator

unit for speed control and all remaining accessories including

safety pin, nut bolts, washers, temperature rise=75 degree

C (max.), insulation resistance more than 2 mega ohm,

suitable for 230 V, 50 Hz, single phase AC Supply, earthing

etc. complete as required.

Supplying and fixing two module stepped type electronic fan

regulator on the existing modular plate switch box including

10 DSR 1.25 Each

connections but excluding modular plate etc. as required.

Installation, testing and commissioning of ceiling fan,

11 DSR 1.44 including wiring the down rods of standard length (upto 30 Each

cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor,

single core cable etc. as required. 8 220.15 1,761.22

12 NSI-9 Supply of 300 mm dia heavy duty Domestic Exhaust Fan Each

CHANDRESH KUMAR

Rates(Rs) Amount(RS)

S.No. Item No. Description of items Unit

Qty DSR NS DSR-2022 NS

13 NSI-10 Supply of Heavy Duty 450mm Heavy Duty Wall fan Each 3 6,900.00 20,700.00

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - II

SUBHEAD - III - MAIN BOARDS

Supplying, installing, testing & commissioning of following

type compartmentalised wall mounted / floor mounted

cubicle board made from 2mm thick CRCA sheet dust &

vermin proof duly phosphatized & powder coated inclusive of

suitable size 4 strip Al. Busbar complete with interconnection

providing Lugs, inter-earthing, painting etc. i/c providing &

fixing below noted accessories:

Receiving,unloading,storing, handling, installation, testing

and commissioning of following MV Switchboards complete

as required and as per site condition and dimension of all

panels shall be carried out as per the attachad sld

1 NSI-1 MAIN LT PANEL ( FOR BUILDING ) Set 1 1,50,800.00 1,50,800.00

2 NSI-2 FIRE FIGHTING PANEL Set 1 40,000.00 40,000.00

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - III

SUBHEAD - IV - DISTRIBUTION BOARDS

Supplying and fixing following way, single pole and neutral,

sheet steel, MCB distribution board, 240 V, on surface/

1 DSR 2.3 recess, complete with tinned copper bus bar, neutral bus

bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator)

1.2 DSR 2.3.2 8 way, Double door Each 1 2,659.40 2,659.40

1.3 DSR 2.3.3 12 way, Double door Each 2 2,392.74 4,785.48

Supplying and fixing following way, three pole and neutral,

sheet steel, MCB distribution board, 415 volts, on surface/

recess complete with tinned copper busbar, neutral busbar,

2 DSR 2.4 earth bar, din bar, detachable gland plate, interconnections,

phosphatized and powder painted including earthing etc. as

required. (But without MCB/ RCCB/ Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA,

"C" curve, miniature circuit breaker suitable for inductive

4 DSR 2.10 load of following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, 240 V,

5 DSR 2.12 isolator in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Supplying and fixing following rating, four pole, 415 V,

6 DSR 2.13 isolator in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

Supplying and fixing following rating, double pole, (single

phase and neutral), 240 V, residual current circuit breaker

7 DSR 2.14 (RCCB), having a sensitivity current 30 mA in the existing

MCB DB complete with connections, testing and

commissioning etc. asrequired.

CHANDRESH KUMAR

Rates(Rs) Amount(RS)

S.No. Item No. Description of items Unit

Qty DSR NS DSR-2022 NS

Supplying and fixing DP sheet steel enclosure on surface/

8 DSR-2.16 along with 25/32 A 240 V "C" curve DP MCB complete with Each

connections, testing and commissioning etc. as required.

Supplying and fixing single pole blanking plate in the

9 DSR 2.11 existing Each

MCB DB complete etc. as required. 5 13.44 67.18

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - IV 90,394.84 -

SUBHEAD - V - EARTHING

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm

thick including accessories, and providing masonary

1 DSR 5.4 enclosure with cover plate having locking arrangement and Sets

watering watering pipe 2.7 metre long etc. with charcoal/

coke and salt as required. 1 7,722.91 7,722.91

Earthing with Cu. earth Plate 600mm x 600mm x 3mm thick

including accesssories, and providing masonary enclosure

2 DSR 5.6 with cover plate (CI heavy duty) having locking arrangement Sets

and watering pipe pipe of 2.7 mtr long etc. with charcoal or

coke and salt) as required.

Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia

3 DSR 5.11 G.I. pipe from earth electrode, including connection with G.I. Mtr

nut, bolt, spring, washer excavation and refilling etc. as

Providing and fixing 25 mm X 5 mm copper strip on surface

4 DSR-5.14 or in recess for connections etc. as required. 2 nos used for Mtr

50 x 5 for the Neutral earthing of euipments )

Providing and fixing 25 mm X 5 mm G.I. strip on surface or

5 DSR 5.15 Mtr

in recess for connections etc. as required. 20 252.19 5,043.87

Providing and fixing 6 SWG dia G.I. wire on surface or in

6 DSR 5.16 Mtr

recess for loop earthing etc. as required. 20 72.35 1,447.01

Supply and laying medium class GI pipe under road/paved

7 NSI-2 areas/wall crossing etc. including earth excavations refilling,

ramming and making good as approved.

7.1 NSI-2.1 150 mm dia GI pipe Class B Metre 10 1,600.00 16,000.00

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - V 67,131.02 16,000.00

SUBHEAD - VI - SUPPLYING & LAYING OF CABLE

Laying of one number PVC insulated and PVC sheathed /

XLPE power cable of 1.1 KV grade of following size direct in

1 DSR 7.1 ground including excavation, sand cushioning, protective

covering and refilling the trench etc. as

Laying of one number additional PVC insulated and PVC

sheathed / XLPE power cable of 1.1 KV grade of following

size direct in ground in the same trench in one tier

horizontal formation including excavation, sand cushioning,

protective covering and refilling the trench etc. as required.

Supply of following sizes of XLPE insulated Aluminum

3 NSI conductor strip/ wire Armoured, overall PVC sheathed 1.1 KV

grade cables conforming to relevant IS-7098 Code and

technical specifications.

Supplying and making end termination with brass

compression gland and aluminium lugs for following size of

PVC insulated and PVC sheathed / XLPE aluminium

conductor cable of 1.1 KV grade

TOTAL CARRIED TO SUMMARY FOR SUBHEAD - VI

CHANDRESH KUMAR

Rates(Rs) Amount(RS)

S.No. Item No. Description of items Unit

Qty DSR NS DSR-2022 NS

SUB HEAD -VII :EXTERNAL LIGHT

Supplying, installation, testing and commissioning of 65W

LED Street Light IP66 LED with High performance having

system lumen output of minimum 9900 lumens,

contemporary designed housing made of die-cast aluminium,

with street optic LENS for uniform light distribution. PF

better than 0.9, CRI better than 70 complete with all

accessories. Wipro Cat No.: LR 02-102-XXX-57-G2 Street

SITC of 6m ht. GI pole alongwith control box,6A MCB etc. as

required for St. height 4 10,000.00 40,000.00

TOTAL CARRIED TO SUMMARY FOR SUBHEAD -VII

CHANDRESH KUMAR

BOQ for LV Works (Fire Fighting)

S.No Total Rates(Rs) AMOUNT(Rs)

Item No. Description of itemsUnit

. Qty. DSR NSI DSR-2022 NSI

SUBHEAD - I - FIRE ALARM

CONVENTIONAL SYSTEM

Supplying, installation, testing &

commissioning sector panel suitable for

following zones, complete with visual

DSR indications for short circuit fault, open

1 circuit fault, fire condition and all other

standard facilities as per IS:2189 with

mimic diagram for all area/zone

covered, complete with all connections,

interconnections as required

Supplying, installation, testing &

commissioning of conventional beam

detector with short circuit isolator

2 NS-1 (inbuilt or seperate) complete with Nos. 2 43,644.00 87,288.00

emitter and receiver including

connections with remote test features

etc complete with all accessories.

Supplying, installation, testing &

commissioning of smoke detector with

DSR builtin LED and mounting base

17.1.2 complete with all connections etc. as

Supplying, installation, testing &

commissioning of manual call boxes of

DSR MS construction in surface/recess with Nos.

17.1.3 stainless steel chain & hammer

assembly complete with glass and push

button etc. as required.

Supplying, installation, testing &

commissioning fire alarm sounder with

facility to make announcement,

DSR mounted in M.S. box (16 SWG) with

17.1.6 hinged cover plate & suitable for

operation with amplifier i/c line

matching transformer etc. complete as

Supplying & laying of 2x1.5 sqmm

fire alarm armoured cable,

DSR 600/1000V rated with annealed

6 copper conductor having XLPE Mtrs 160 145.73 23,317.56

insulation, steel wire armouring &

FRLS outer sheath complete as

Supplying and fixing of following

sizes of steel conduit along with

accessories in surface/recess

including painting in case of surface

7 DSR 1.20 conduit, or cutting the wall and

making good the same in case of

recessed conduit as required.

CHANDRESH KUMAR

S.N. DESCRIPTION OF ITEM QUANTITY UNIT AMOUNT(Rs)

2021 Rates(Rs)

Preparation and consolidation of sub grade with power road roller of

8 to 12 tonne capacity after excavating earth to an average of 22.5

1 cm depth, dressing to camber and consolidating with road roller

including making good the undulations etc. and re-rolling the sub

grade and disposal of surplus earthwith lead upto 50 metres..

Excavating, supplying and filling of local earth (including royalty) by

mechanical transport upto a lead of 5km also including ramming

and watering of the earth in layers not exceeding 20 cm in

trenches, plinth, sides of foundation etc. complete.

Construction of granular sub-base by providing close graded

Material conforming to specifications, mixing in a mechanical mix

plant at OMC, carriage of mixed material by tippers to work site, for

3 16.78 all leads & lifts, spreading in uniform layers of specified thickness

with motor grader on prepared surface and compacting with

vibratory power roller to achieve the desired density, complete as

per specifications and directions of Engineer-in-Charge.

With material conforming to Grade-I (size range 75 mm to

0.075 mm) having CBR Value-30

Construction of dry lean cement concrete sub base over a prepared

sub-grade with coarse and fine aggregate conforming to IS:383,

the size of coarse aggregate not exceeding 25 mm, aggregate

ratio not to exceed 15:1, aggregate gradation after blending to be

as per specifications, cement content not to be less than 150

Kg/cum, optimum moisture content to be determined during trial

length construction, concrete strength not to be less than 10 Mpa

at 7 days, mixed in a batching plant, transported to site, for all

leads & lifts, laid with a mechanical paver, compacting with 8-10

tonne vibratory roller, finishing and curing etc. complete as per

direction of Engineerin- charge.

Providing and filling in position rubberized bitumen hot sealing

5 16.46 compound for sealing of expansion joints in roads / pavements all

complete as per direction of the Engineer-in-Charge.

16.46.1 Using grade 'A' sealing compound conforming to IS: 1834. 15609.00 ₹ 7.75 ₹ 1,20,998.63

Providing and laying C.C. pavement of mix M-25 with ready mixed

concrete from batching plant. The ready mixed concrete shall be

laid and finished with screed board vibrator , vacuum dewatering

process and finally finished by floating, brooming with wire brush

etc. complete as per specifications and directions of Engineer-

incharge. (The panel shuttering work shall be paid for separately).

Note:- Cement content considered in M-30 is @ 330 kg/cum.

Excess/ less cement used as per design mix is payable/ recoverable 28.22 cum ₹ 8,555.51 ₹ 2,41,425.80

Providing and laying at or near ground level factory made kerb

stone of M-25 grade cement concrete in position to the required

line, level and curvature, jointed with cement mortar 1:3 (1

cement: 3 coarse

sand), including making joints with or without grooves (thickness of

joints except at sharp curve shall not to more than 5mm), including

making drainage opening wherever required complete etc. as per

direction of Engineer-in-charge (length of finished kerb edging shall

be measured for payment). (Precast C.C. kerb stone shall be

approved by Engineer-in-charge).

Digitally signed by

CHANDRESH KUMAR

BOQ SURFACE DRAIN

DESCRIPITION OF ITEM QTY. UNIT Rates(Rs) AMOUNT

Sl. DSR- ( In Rs.)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means

1 over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan)

including getting out and disposal of excavated earth lead upto 50 m and lift upto

1.5 m, as directed by Engineer-in-charge.

2.6.1 all kinds of soil 59.76 cum 212.35 12,690.27

Filling available excavated earth (excluding rock) in trenches, plinth, sides of

2 2.25 foundations etc. in layers not exceeding 20cm in depth: consolidating each

deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Providing and laying in position cement concrete of specified grade excluding the

cost of centering and shttering - All work up to plinth level

1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4

4 4.1.4 graded stone aggregate 40 mm nominal size derived from natural sources)

Centering and shuttering including strutting, propping etc. and removal of form for

5.9.1 Foundations, footings, bases of columns, etc. for mass concrete 27.80 Sqm 318.29 8,847.22

Brick work with F.P.S. bricks of class designation 75 in foundation and plinth in :

6.1.2 Cement mortar 1:6 (1 cement : 6 coarse sand) 9.73 Cum 6881.83 66,960.25

7 13.7 12 mm cement plaster finished with a floating coat of neat cement of mix :

Digitally signed by

CHANDRESH KUMAR

BOQ FOOTPATH work

Sl. DESCRIPTION OF ITEM QTY UNIT Rates(Rs) AMOUNT On

1. Earth work in excavation by mechanical means

(Hydraulic excavator) / manual means over areas

2.6 (exceeding 30cm in depth. 1.5 m in width as well as

10 sqm on plan) including disposal of excavated

earth, lead upto 50m and lift upto 1.5m, disposed

earth to be levelled and neatly dressed. 15.12 Cum 212.35 3,210.72

2.6.1 all kinds of soil

2 Providing and laying in position cement concrete of

specified grade excluding the cost of centering and

shuttering. All work upto plinth level.

1:5:10 (1 cement : 5 course bound: 10 graded stone

aggregate 40mm nominal size) 15.60 Cum 6253.83 97,559.76

3 Providing and laying 60mm thick faciory made

cement concrete interlocking paver block of M -30

grade made by block making machine with strong

vibratory compaction, of approved s;ze, design &

16.68 shape, laid in required colour and pattern over and

including 50mm thick compacted bed of coarse sand,

filling the joints with line sand etc. all complete as per

the direction of Engineer-in-charge.

4 Providing and laying at or near ground level factory

made kerb stone of M-25 grade cement concrete in

position to the required line, level and curvature,

jointed with cement mortar 1:3 (1 cement: 3 coarse

sand), ncluding making joints with or without

16.69 grooves (thickness of joints except at sharp curve

shall not to more than 5mm), including making

drainage opening wherever required complete etc. as

per direction of Engineer-in-charge (length of finished

kerb edging shall be measured for payment). (Precast

C.C. kerb stone shall be approved by Engineer-in- 7.20 Cum 8902.79 64,100.11

5 Painting with synthetic enamel paint of approved

brand and manufacture of required colour to give an

Two or more coats on new work over an under coat of

13.62.1 suitable shade with ordinary paint of approved brand

and manufacture 24.00 Sqm 197.83 4,747.85

6 Excavating, supplying and filling of local earth

(including royalty) by mechanical transport upto a

2.25a lead of 5km also including ramming and watering of

the earth in layers not exceeding 20 cm in trenches,

sides of foundation etc. complete. 43.20 Cum 381.03 16,460.46

7 Filling available excavated earth (excluding rock) in

trenches, plinth, sides of oundations etc. in layers

2.25 not exceeding 20cm in depth, consolidating each

deposited layer by ramming and watering, lead up to

8 Centering and shuttering including strutting, propping

etc. and removal of form for all heights :

a Foundations, footings, bases of columns, etc. for

mass concrete. 25.60 Sqm 318.29 8,148.25

Digitally signed by

CHANDRESH KUMAR

Bill of Quantity for Sound System in MP Hall

Description of Item Qty. Unit Rate(Rs) Amount(Rs)

1 Supply, Installation, Testing & Commissioning of Speaker with below

Specifications:-

Transducer Size : 15" LF Driver + 1 x 1" Horn-loaded Compression

Power Handling : 300 Watts Continuous, 1200W Peak

Freq. Range : 75 Hz - 21 kHz

Dispersion : 90 x 40

Sensitivity : 101 dB

Max SPL : 124dB continuous, 130 dB peak

Approved Makes: OHM, British Acoustics, JBL, Bose, Honeywell

2 Supply, Installation, Testing & Commissioning of Subwoofer with below

Specifications:-

Transducer Size : 18" Low Frequency Driver

Power Handling : 600 Watts Continuous, 2400W Peak

Freq. Range : 45 Hz - 300 kHz

Dispersion : Omni-directional,

Sensitivity : 101 dB

Max SPL : 129dB continuous, 135 dB peak"

Approved Makes:OHM /British Acoustics/ Bose/ British Acoustics

3 Supply, Installation, Testing & Commissioning of Class-D Power Amplifier

below Specifications:-

Number of Channels : 2

Power at 4 Ohms per channel : 1000W

Power at 8 Ohms per channel : 500W

Class-D with LCD Display for critical factors, dual step power factor

built in crossover to set HPF & LPF Filters

Approved Makes: OHM /British Acoustics/ Bose/ British Acoustics 2 92,500.00 1,85,000.00

4 Supply, Installation, Testing & Commissioning of Software Controlled

Digital DSP with below Specifications:-

Number of Inputs - 4,

Number of Outputs - 8,

Input Impedance - 12kΩ unbalanced, 24 kΩ balanced

Adjustable Delay - 1 second / input & 1 second / output

Approved Makes: OHM /British Acoustics/ Bose/ British Acoustics

3 Supply of Flying bar Indian (Customised) with 1 ton chain pully 2 Nos 18,500.00

4 Supply of Stage Monitor Supply of Stage monitor 2-way, bi-amp. bass

reflex design, 400+100W rms Class D amp., 60Hz-20KHz freq resp, 12"

B&C coax custom woofer, 1" B&C HF driver, DSP 4 presets, 130dB SPL

max, Disp 90°, gas-injection polyprop molded enclosure (FBT-

STAGEMAX x 12MA) 1 Nos 47,100.00 47,100.00

5 Supply of Audio mixer 24 mono mic inputs 4 line inputs 66 inputs to

mix 1 ViSi Connect™ option card slot for 64 x 64 input/output expansion

Freely assignable faders and patching Pre/Post selection per input per

bus AES in and out Global mode encoders Soundcraft FaderGlow™ GEQ

on every bus 20 sub-group / aux busses 4 FX busses 8 Matrix busses LR

and C Mix busses 4 Stereo Lexicon Effects engines Delay on inputs and

outputs 4 Mute Groups Freely assignable insert loops Harman HiQnet

integration Colour touch screen interface (Si Expersion-2)(Allen Heath

QU 24)/ (OSL CX24.4)

6 Supply of Corded microphone (Shure-SM58/FBT/sennheiser) 2 Nos 9,154.00 18,308.00

7 Supply of Instrument Microphone(Shure-57/FBT/sennheiser) 2 Nos 9,678.00 19,356.00

8 Supply of Podium Microphone (Shure/FBT-GM5218L/AKG) 2 Nos 28,411.00 56,822.00

9 Supply of Microphone Stand Big(GS) 2 Nos 1,124.00 2,248.00

10 Supply of Microphone Stand Small(GS) 2 Nos 843.00 1,686.00

11 Supply of microphone cable from stage to control room for microphone

points with conduit pipe etc. (PLS/Tasker/Krystal) 310 Mtr 131.00 40,610.00

12 Supply of Speaker 2.5sqmm x3core(Incol/Polycab/Kalinga/Incoil) 195 Mtr 114.00 22,230.00

13 Supply of microphone connecting box made out from CRC sheet metal

box duly powder coated paint,with 6 nos XLR panel mounting socket &

phono socket having the facility to connect the 6nos microphone

14 Supply of Professional Head phone(German Meastro/Sennheiser) 1 Nos 7,127.00 7,127.00

15 Supply of Microphone cable XLR to XLR up to 10 Mtr(PLS) 15 Nos 1,265.00 18,975.00

Digitally signed by

CHANDRESH KUMAR

Description of Item Qty. Unit Rate(Rs) Amount(Rs)

16 Supply of Microphone cable XLR to XLR up to 15 Mtr(PLS) 15 Nos 1,861.00 27,915.00

17 Supply of Speaker connectin connector & MCB Box for Speaker etc

18 Installation Job 1 Job 80,000.00 80,000.00

Say Rs. (in Lakh) = 12 Lakh

Digitally signed by

CHANDRESH KUMAR