Renovation works for the Municipal Girls Higher Secondary School building at NAGAPATTINAM in Nagapattinam District

Amount

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

21.2) Teak wood Wrought & Put up a. T.W. over 2.00 m & below 3.00 m

b. T.W. below 2.00 m length.

30) Finishing the top of flooring with cement concrete 1:3, 20mm thick Ellispattern flooring (No sand)

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

37.1) White washing 3 coats (slaked)

39) Supplying and fixing of MS Grills in position

40) Painting 2 coats - New "wood work"

41) Painting 2 coats - New "iron work"

Electrical arrangements 74) Charges for assembling and fixing of ceiling "Fan"

77.3) Supplying, fixing and concealing PVC box (Fire retardant box) of size 8”x6”x4” covered with 3mm thick hylem sheet including Cost of TV line socket I Telephone line Socket

77.4) Supplying and fixing of 20mm dia PVC pipe for TV/Telephone line

112) Supplying and fixing of Exhaust Fan 300 mm dia

238) Anticorrosive treatment for steel reinforcement rods

Annexure 3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

8.5.1) Standardized Concrete mix M30 Grade using crushed stone sand a. In Ground Floor

b. In First Floor

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture b. In First Floor

11.6.1) Brick work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") 70 mm tk using crushed stone sand with Admixture (B.P.) a. In Ground Floor

b. In First Floor

14.2.1) Precast Cupboard slab 40mm tk in standardised concrete mix M30 Grade by using 3mm - 10mm HBGS Jelly using crushed stone sand with Admixture 40mm thick a. In Foundation & Basement

15.1.1) Cuddapah Slab 20mm tk. for cupboard slab / Similar works a. In Ground Floor

b. In First Floor

15.2.2) Cuddapah Slab 40mm tk. for sunshade a. In Ground Floor

b. In First Floor

18.1) Formwork using M.S.Sheet c. For Square and rectangular columns and small quantities

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

22.3.3) Cup board/ward robes double leaf shutters using 9mm thick phenol bonded BWR grade plywood, TW frames, styles & rails including two coat enamel paint over one coat primer with brass screws

22.3.4) Supplying and fixing of Teak wood Single leaf shutters for frames of doors, windows, ventilators with necessary Aluminium furniture fittings plugs, rebates for shutters, plaster grooves on all faces including cost of all materials and labour charges for fixing in position

23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings

26.1) Flooring in C.C.1:5:10 using 40mm size HBSJ using crushed stone sand

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

29.6.1) Supplying and fixing of Acid proof tiles flooring using crushed stone sand

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

32.1.4) Pointing the pressed tiles with C.M. 1:3 mixed with WPC using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

37.2) White washing two coats for old ceiling surfaces

38.4.1) Two coat of Oil Bound Distemper over the primer coat of white cement

38.4.3) Painting the old walls with two coats of Oil Bound Distemper over existing wall surfaces including thorough scrapping

38.6) Primer coat using one coat of white cement over the cement plastered/ concrete new wall surfaces or other similar works

40.1) Two coats of painting over the old wood work including Removing old paint from doors, windows & wood works by manual labour

41.1) Two coats of painting over the old iron work and other similar works including Removing old paint from iron surface with sand paper

43.1.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods (Binding Wire insulated with PVC)

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M30 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit

b) Augering 30cm dia

44.6.1) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe (UPVC Special Clamp)

51.1) Supplying and fixing of HDPE water tank 5000 lit capacity with ISI mark

52.2) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., a. 32 mm dia

b. 25 mm dia

52.4.1) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., (fully consealed in walls) c. 20mm dia

53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")

54.1.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Long body)

54.2.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia

58.4) Supplying, Laying & Concealing the 50mm dia PVC (SWR) pipe with ISI mark type - 'B' with relevant specials.

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

61.1.1) Supplying and fixing of UPVC Non Pressure Pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a) 110mm dia UPVC Non Pressure pipe

b) 160mm dia UPVC Non Pressure pipe

62.1.1) Supplying and fixing of PVC Bend fabricated 6 KSC PVC specials as per IS 10124/1982 Part II a) 110mm dia PVC Bend

b) 160mm dia PVC Bend

62.2.1) Supplying and fixing of PVC Equal Tee (mould) BIS 7834/1975 PVC specials as per IS 10124/1982 Part-II a) 110mm dia PVC Equal Tee

b) 160mm dia PVC Equal Tee

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose

b. Light point without ceiling rose with bakelite battern holder

67.1) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 3 pin plug socket point at Switch Board Itself

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 3 pin plug socket point at Convenient Places.(Open wiring) using PVC electrical box

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.6.1) Run off 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

77.7.1) Run off 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

98.3) T.W.single leaf Panelled door shutter with Aluminium fittings Suitable for door of size a. 900 x 2100mm

100) Supplying and fixing of 9 watts LED Bulb

101.1) Supplying and fixing of 30 watts LED bulb with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light fittings

103.1) Supplying and fixing of Bulk Head fitting suitable for 15 watts LED bulb

104.1) Supplying and fixing of 15 watts LED bulb for bulk head fittings

107) Supplying and fixing of 5 Amps Flush type switch

122) Supplying and fixing of following dia GM specials a) 32mm dia GM Gate valve (Heavy duty)

130) Supplying and fixing of 25cm Tamil Brass letters

238.1) Anticorrosive treatment for window grills

272) Providing two legged scaffolding using 13 to 15 cm dia casurina post with country wood planks (Silver Oak) 40mm thick a) 5.5m height in addition to 2.5m height

361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

796) Two coat of Exterior emulsion paint including special primer for outer wall surfaces

796.1) Painting the old walls with two coats of Exterior emulsion paint without primer and including thorough scrapping

800.1) Dismantling, clearing away and carefully stacking materials useful for re-use of Reinforcement cement concrete by manual / by using deploying machineries

800.2) Dismantling, clearing away and carefully stacking materials useful for re-use of Pressed Tiles & Weathering Course

800.3) Clean removal of cement plaster from the existing cement floor finish

800.3.1) Clean removal of cement plaster from the damaged peelout plastering

800.4.1) Dismantling clearing away and carefully stacking materials useful for reuse of brick masonry in cement mortar walls a) Under 3.00m height

800.5) Dismantling and clearing away of Floor finish and dadooing walls in cement mortar with Mosaic tiles / Glazed Tiles / Clay Tiles / Cuddapah slabs

800.9) Dismantling, clearing away and carefully stacking materials useful for reuse for Doors and Windows including removal of frames, hinges and fastenings

800.11) Dismantling, clearing away and carefully stacking materials useful for re-use of Plain cement concrete

A VELANI