CONSTRUCTION OF LNG SATELLITE STATION WITH LNG DISPENSING FACILITY AT BADAPOKHARIA, TANGI -KHORDA, CUTTACK (PART-A), NASIRABAD, RAJASTHAN (PART-B), RAMAYAMPET, MEDAK TELANGANA (PART-C) AND ARPL, PUNE- AHILYANAGR, MAHARASHTRA (PART-D)

ARCHITECTURAL WORKS

FLOORING

Providing & laying rectified Vitrified floor tile 1st quality of approved make in different sizes (thickness as per approved manufacturer’s detail) with water absorption's less than 0.08% and conforming to IS:15622 of approved quality,shade,range and pattern, using cementitious modified quick set tile adhesive, water based conforming to IS:15477 using 5kg adhesive per m2 area in average thickness of 3 mm, laid to proper level and joints pointed with tile jointing compound of approved make including curing, finishing and cleaning etc. complete as directed by the EIC. The measurements shall be based on laid area of floor and no extra payment shall be paid for wastage. The rates shall include cost of laying protective PVC sheets/ POP which shall keep the floor covered at all times till handing over of the site etc. complete. Item shall be inclusive of screed bed of minimum thickness 15mm in CM 1:4.Size of Tile 600x600 minimum and minimum thickness 9 mm.

Providing and laying vitified floor tiles 1st quality of approved make (thickness as per approved manufacture’s detail but not less than 7 mm) matching / same as the size and colour of flooring in skirting, riser, dados and wall facing (lining) and pillars using cementitious modified quick set tile adhesive, water based conforming to IS:15477 using 5kg adhesive per m2 area in average thickness of 3 mm, of approved make, laid to proper level and joints pointed with tile jointing compound of approved make including finishing and cleaning etc. complete as directed by the EIC.

Providing and laying kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick

Providing and laying glazed/ matte finish ceramic tiles for Dado with a recycle content of 35-55% of Group - I classification, conforming to IS:13754 of approved colour at all levels and locations with necessary specials etc. using approved first quality tiles as shown in the drawing laid over and including minimum 12 mm thk. CM 1:3 backing or tile fixing adhesive with volatile organic compounds not exceeding 65 g/l mixed to cement paste used for fixing the tiles, joints filled with white cement mixed with matching shade of pigment etc. at all leads and lifts, complete with all byeworks as per specification and direction of Engineer Incharge.Size of tile 300 mm X 600 mm (approx.)

Providing and laying anti-skid MATTE FINISH ceramic tiles in flooring with a recycle content of 35-55% of Group - IV classification, conforming to IS:13754 and of approved colour at all levels and locations using approved first quality tiles in flooring of toilets, pantry etc. and as shown in the drawing laid over and including minimum 35 mm bed (CM 1:3) joints filled with white cement mixed with matching shade of pigment etc. at all leads and lifts, complete with all byeworks as per specification and direction of Engineer Incharge. Grooves to be filled with water proof grouting compounds.Size of tile 30 cm X 30 cm (approx.)

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in- Charge.

In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand)