Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC | ₹30.7 L Quoted ₹32.8 L | L1 | Accepted-AOC Lowest |
| 2 | L2₹38.5 LRejected-Finance | ₹38.5 L | L2 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | M/s Shiv Electrical & Mechanical Works L2 | H S SETHI and CO L1 |
|---|---|---|---|---|---|
| 1.00 | Material and labour for disconnecting of defective burnt elect motor from pump after removing all connection like electrical, earthing etc. by using chain pulley or by other means without causing any damage to existing equipments, transportation to civil work-shop for repair/rewinding, Strip opening elect motor 10 to 12.5 HP, 3 Phase 440 Volts, 1440 RPM, 50 Cycle, removing of defective burnt winding of stator, cleaning of rotor and starter, rewinding the stator of motor with super enameled copper wire of suitable turn and gauge as per original including insulation material for insulation class ‘B’ varnishing and painting outer surface with one coat of synthetic enamel paint with spray gun, reassembling including replacement of ball bearings of same model and make, testing to the entire satisfaction of Engineer-in-Charge and connecting all as per original complete all as specified and directed. | 1 | Each Job | 7,500 ₹7,500 | 3,000 ₹3,000 |
| 2.00 | All as per item No. 1 here-in-before but elect motor of capacity 5 HP to 7.5 HP. | 1 | Each Job | 4,500 ₹4,500 | 3,000 ₹3,000 |
| 3.00 | Material and labour for disconnecting of defective pump set after removing all connections, pipe connections, etc. by using chain pulley or by other maens without causing any damage to existing equipments, transportation to civil work-shop for Strip opening pumping set cap 10 to 12.5 HP, removing of defective ball bearings, shaft and cleaning and reassembling the same after replacemnt of ball bearings and key or lathe work required as per existing pattern and reassambling the same and testing to the entire satisfaction of Engineer-in-Charge and connecting all as per original complete all as specified and directed. Note Shaft and Impeller if requried shall be measured and paid for seperately under supply only items . | 1 | Each Job | 4,200 ₹4,200 | 3,000 ₹3,000 |
| 4.00 | All as per item No. 3 here-in-before but elect motor of capacity 5 HP to 7.5 HP. | 1 | Each Job | 2,700 ₹2,700 | 1,000 ₹1,000 |
| 5.00 | Supply only stainless shaft complete suitable for 10 HP to 12.5 HP pumping set all as per existing pattern complete all as specified and directed. | 1 | Each | 1,800 ₹1,800 | 1,000 ₹1,000 |
| 6.00 | Supply only stainless shaft complete suitable for 5 HP to 7. 5 HP pumping set all as per existing pattern complete all as specified and directed. | 1 | Each | 1,600 ₹1,600 | 1,000 ₹1,000 |
| 7.00 | Supply only CI impeller complete suitable for 10 HP to 12.5 HP pumping set all as per existing pattern complete all as specified and directed. | 1 | Each | 2,800 ₹2,800 | 1,000 ₹1,000 |
| 8.00 | Supply only CI impeller complete suitable for 5 HP to 7. 5 HP pumping set all as per existing pattern complete all as specified and directed. | 1 | Each | 1,700 ₹1,700 | 1,000 ₹1,000 |
| 9.00 | Material and Labour for lifting defective submersible pumping set of capacity exceeding 45 HP but not exceeding 50 HP complete taking out with the help of chain pulley or by other means by arranging sufficent man power without causing damage to existing equipment, removing flanged column pipe assembly by opening nuts, bolts, etc. including disconnecting of delivery main lines andl electric connection from starter and transporting the motor and pump set to workshop for carrying out repairs as required, reassebling and lowering the same after carrying repairs, connecting coloum pipes with new nuts, bolts, etc. of suitable size as per existing size including lowering existing submersible cable of any size from starter complete and testing to the entire satisfaction of the Engineer-in-charge complete all as specified and directed. | 1 | Each Job | 4,500 ₹4,500 | 2,000 ₹2,000 |
| 10.00 | Material and Labour for lifting defective submersible pumping set of capacity 35 HP to 45 HP complete, taking out with help of chain pulley or by other means by arranging sufficent man power without causing damage to existing equipment, removing flanged column pipe assembly by opening nuts, bolts, etc. including disconnecting of delivery main lines and electric connection from starter and transporting the motor and pump set to workshop for carrying out repairs as required, reassebling and lowering the same after carrying repairs, connecting coloum pipes with new nuts, bolts, etc. of suitable size as per existing size including lowering existing submersible cable of any size from starter complete and testing to the entire satisfaction of the Engineer-in-charge complete all as specified and directed. | 8 | Each Job | 3,800 ₹30,400 | 2,000 ₹16,000 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
10 Apr 2026, 6:00 pmClosed
GE Amritsar
Garrison Engineer Amritsar Cantt PIN- 143001
REPAIR/MAINTENANCE OF SUBMERSIBLE PUMP/CENTRIFUGAL PUMP AT DIFFERENT LOCATIONS AT OLD AMRITSAR, GG FORT, VALLA AND SWIMMING POOL ALLIED WORKS UNDER GE AMRITSAR CANTT
2026_MES_756918_1
GE/ASR-05/2026-27
Open Tender
Civil Works
180 days
GE Amritsar
CLASS D CATEGORY a ii
8 documents required · 8 mandatory
₹500
GE Amritsar
₹70,000
20 May 2026
19 Mar 2026
17 Apr 2026
19 Mar 2026
10 Apr 2026
3 Apr 2026
20 Mar 2026 - 27 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| - | Material and labour for disconnecting of defective burnt elect motor from pump after removing all connection like electrical, earthing etc. by using chain pulley or by other means without causing any damage to existing equipments, transportation to civil work-shop for repair/rewinding, Strip opening elect motor 10 to 12.5 HP, 3 Phase 440 Volts, 1440 RPM, 50 Cycle, removing of defective burnt winding of stator, cleaning of rotor and starter, rewinding the stator of motor with super enameled copper wire of suitable turn and gauge as per original including insulation material for insulation class ‘B’ varnishing and painting outer surface with one coat of synthetic enamel paint with spray gun, reassembling including replacement of ball bearings of same model and make, testing to the entire satisfaction of Engineer-in-Charge and connecting all as per original complete all as specified and directed. | 1 | Each Job | - | - |
| - | All as per item No. 1 here-in-before but elect motor of capacity 5 HP to 7.5 HP. | 1 | Each Job | - | - |
| - | Material and labour for disconnecting of defective pump set after removing all connections, pipe connections, etc. by using chain pulley or by other maens without causing any damage to existing equipments, transportation to civil work-shop for Strip opening pumping set cap 10 to 12.5 HP, removing of defective ball bearings, shaft and cleaning and reassembling the same after replacemnt of ball bearings and key or lathe work required as per existing pattern and reassambling the same and testing to the entire satisfaction of Engineer-in-Charge and connecting all as per original complete all as specified and directed. Note Shaft and Impeller if requried shall be measured and paid for seperately under supply only items . | 1 | Each Job | - | - |
| - | All as per item No. 3 here-in-before but elect motor of capacity 5 HP to 7.5 HP. | 1 | Each Job | - | - |
| - | Supply only stainless shaft complete suitable for 10 HP to 12.5 HP pumping set all as per existing pattern complete all as specified and directed. | 1 | Each | - | - |
| - | Supply only stainless shaft complete suitable for 5 HP to 7. 5 HP pumping set all as per existing pattern complete all as specified and directed. | 1 | Each | - | - |
| - | Supply only CI impeller complete suitable for 10 HP to 12.5 HP pumping set all as per existing pattern complete all as specified and directed. | 1 | Each | - | - |
| - | Supply only CI impeller complete suitable for 5 HP to 7. 5 HP pumping set all as per existing pattern complete all as specified and directed. | 1 | Each | - | - |
| - | Material and Labour for lifting defective submersible pumping set of capacity exceeding 45 HP but not exceeding 50 HP complete taking out with the help of chain pulley or by other means by arranging sufficent man power without causing damage to existing equipment, removing flanged column pipe assembly by opening nuts, bolts, etc. including disconnecting of delivery main lines andl electric connection from starter and transporting the motor and pump set to workshop for carrying out repairs as required, reassebling and lowering the same after carrying repairs, connecting coloum pipes with new nuts, bolts, etc. of suitable size as per existing size including lowering existing submersible cable of any size from starter complete and testing to the entire satisfaction of the Engineer-in-charge complete all as specified and directed. | 1 | Each Job | - | - |
| - | Material and Labour for lifting defective submersible pumping set of capacity 35 HP to 45 HP complete, taking out with help of chain pulley or by other means by arranging sufficent man power without causing damage to existing equipment, removing flanged column pipe assembly by opening nuts, bolts, etc. including disconnecting of delivery main lines and electric connection from starter and transporting the motor and pump set to workshop for carrying out repairs as required, reassebling and lowering the same after carrying repairs, connecting coloum pipes with new nuts, bolts, etc. of suitable size as per existing size including lowering existing submersible cable of any size from starter complete and testing to the entire satisfaction of the Engineer-in-charge complete all as specified and directed. | 8 | Each Job | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.19 MB
TENDER05.pdf
Tender Documents • 1.03 MB
BOQ_847855.xls
BOQ • 2.15 MB
Download all tender documents and submit your bid