PROVISION OF STORE ROOM NEAR CWE OFFICE AT NAVAL STATION KARANJA

Amount

Material and labour for pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width in type B1 (1:2:4) and setting in mortar (1:6) complete all as specified and as directed.

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (with out using extra cement) complete all as specified and as directed.

Material and labour for rendering 15mm thick on fair faces of brick/concrete surfaces in CM (1:4), finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparing new plastered surfaces of walls and for applying two coats of oil bound distemper over & including a coat of chalk whitening primer over 3mm thick wall care putty on plastered surfaces complete all as specified and directed.

Material and labour for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern over & including one coat of primer complete all as specified and as directed.

Material and labour for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated Mangalore pattern steel sheet and curved at end portion of sheet of 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Supply and fix pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for RCC type B1 1:2:4 (20 mm graded aggregate) in columns, pillars, piers, posts and structs complete all as specified and directed.

Formwork to flat sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Material and labour for RCC type B1 1:2:4 (20 mm graded aggregate) as in lintels over 1.5m Span complete all as specified and as directed.

Use and waste for formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and as directed.

Material and labour for TMT bars 10 mm and above, cut to length , bent to shape required, including cranking bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and as directed.

Material and labour for TMT bars 6 mm to 8mm dia cut to length , bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in reinforcement complete all as specified and as directed.

Material and labour for non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors over screed bed or bedding layer of mortar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

Supply and fix PVC False ceiling consisting of 600 mm x 600 mm, 5 mm thick prelaminated self design PVC sheet of density 600 kg/cum solid PVC panel insert in a frame work made using aluminium T section of size (25mm x 25 mm, 19 gauge or 1mm thick) in square pattern of grid size of 600 x 600 mm. The aluminium frame work is supported from the ceiling with the help of GI wire/6 mm MS rods of required size sato maintain for proper level etc. The aluminium frame work is supported on side wall with the use of aluminium 25 mm X 25 mm angles complete all as specified and as directed.

Supply and fix 5.5 mm thick sheet glass, ordinary quality , glazing with oil putty or with wooden or aluminium beads, area exc 0.50 Square Sqm each pane complete all as specified and as directed.

Supply and fix aluminium body hydraulically door closer regulated, designation No.3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

Supply and fix aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc., complete and also including powder coated aluminium fittings such as stainless steel hinges, tower bolts, hooks & eyes, peg stays and handles, concealed star lock for aluminium window, Mortice lock vertical type size 100mm 04 lever for door, rubber beading suitable for fixing 4mm / 5mm thick glass in aluminium window / doors including connected items, with and making good to the disturbed portion with its original specifications incl taking down existing members/frame any position complete all as specified and directed.

Supply and fix for aluminium anodised grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm & 1.4mm thick all as per manufactures instructions complete all as specified & directed.

Material and labour for Preparation of new steel surface of any description not otherwise described, over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for green marble 17/18 mm thick machine cut, jointing and pointing with white cement slurry including 20mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and directed.

Material and labour frame work such as grill, as an fencing posts, angle, grating etc with ends of bar shouldered and / or riveted or forged into spikes , framed guard bars , barred iron doors, ladders, framed balusters etc. & similar work conforming to Fe-290 grade E1-65. Note:-Posts/struts of angle iron made to shape shall be welded to existing angle iron bracket of security wall, contractor shall make his own arrangement for welding for boundary wall by using gen sets or any alternative arrangement complete all as specified and as directed.

(Internal Electrification) Material and labour for point wiring with 1.5 sqmm (nominal area) FRLSH PVC insulated and unsheathed multistranded copper conductor cable ( using colour code as per IS) 1100 volts grade drawn through and including new casing capping (ISI marked) on wall surface with all accessories including modular flush box with cover plate including 1.5 sqmm size FRLSH PVC insulated unsheathed copper conductor multistranded cable for continuous earth conductor ( using green colour) to common earth and connecting to earth dolly, complete all as specified & directed for the following :- (a) One light / Buzzer point controlled by one switch 5 Amp, SP, one way 240 volts.

(b) One fan/exhaust fan point controlled by one switch

(c) One 5 pin socket outlet 5 Amps on same board

(d) One 5 pin socket outlet 5 Amps on independent board

All as per item No 24 above but with 2.5 sqmm multi stranded copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with FRLSH PVC 2.5 Sqmm multi standard insulated unsheathed copper wire for continues earth on independent board.

Supply and fix switch modular single pole one way, 6 Amp (ISI marked) all as complete all as specified and as directed.

Supply and fix modular TV POINT (ISI marked) complete all as specified and as directed.

Supply and fix modular socket outlet 15 Amp, 5-in-1, controlled by one switch (ISI marked) complete all as specified and as directed.

Supply and fix modular socket 2 in 1, 3 pin, 6 Amp flush type (ISI marked) complete all as specified and as directed.

Supply and fix switch modular single pole one way, 16 Amp (ISI marked) all as complete all as specified and as directed.

Supply and fix modular type fan 5 step regulator for ceiling fan complete all as specified and as directed.

Supply and fix ceiling rose, 3 phase/PVC/polycarbonate, isolated body, three terminals complete all as specified and as directed.

Supply and fix replacement MCB SP 240 V, 50 Hz, 10 KA conforming to IS 8828 of rating 5 to 32 Amp, 'C' series complete all as specified and as directed.

Supply and fix MCB double pole RCBO 240 volts AC 40 Amps (C-series) OF 30MA complete all as specified and as directed.

Supply and fix replacement MCCB TPN, 63 Amp to 100 Amp 240 V, 50 Hz, 16 KA conforming to IS 8828 , 'C' series complete all as specified and as directed.

Material and labour for wiring for circuits/sub main wiring with FRLSH PVC insulate sheathed 2 x 4 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into new concealed PVC conduit with 4 sqmm FRLSH PVC insulated green copper cable for continues earth with suitable dia of PVC pipe with all accessories complete all as specified and as directed.

Material and labour for wiring for circuits/sub main wiring with FRLSH PVC insulate sheathed 2 x 2.5 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into new concealed PVC conduit with 2.5 sqmm FRLSH PVC insulated green copper cable for continues earth with suitable dia of PVC pipe with all accessories complete all as specified and as directed.

Supply and fix double door MCB DB made out of 18SWG CRCA steel sheets, Phosphates powder coated with copper bus bar, Earth stud, Din Rail, Polyamide Terminal Blocks for incoming and outgoing circuits, inbuilt loose wire box, Ground terminal blocks, duly pre-wired with thimble flame retardant copper conductors and poly layer for protection SP 240 volts 200 Amps rated bus bar 12 way double door open able, complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all specified and directed.

Supply and fix LED light fitting square pane light 2 feet X 2 feet, 36w/ 40w white type 220V AC white frame type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply, lay, connect, test and commissioning XLPE 16 sqmm X 4 core underground unearthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 11000 volt grade with multi stranded, aluminum conductor of including laying, testing and commissioning complete all as specified and as directed.

Material and labour for earthing complete with galvanised steel earth plate electrode size 600x600x6.0mm thick buried directly in ground vertically in a pit of depth not less than 2.25 mtr below ground levels with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised iron strip 32X6 mm dia by means of bolts, nuts, check nuts and washers of galvanised steel and GI pipe light grade 20mm dia bore for watering funnel with wire mesh. CI cover with frame, PCC chamber pit with PCC 1:3:6 type C-2 excavation and earth work all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including testing on completion. Note : The unit rate includes for protection pipe and lead wire from top of earth plate up to 7.5 meter above ground level.

M/s S.D Construction Co

ECOBUILD

Mahadev Enterprises

SAI ENTERPRISES

KG ENTERPRISES

DIGITAL SERVICES