Construction of RMD Store Building, Office Building cum Residential Quarter at Industrial Estate Dandi Bhaderwah (Balance Work)

Amount

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.(Make: Jindal, Tata or equal) Welded

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete uptoany pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required complete job.

Providing and fixing precoated galvanised steel sheet roofing accessories0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges plain (500 - 600mm) complete job.

Providing and fixing ply wood 4mm thick one side decorative veneer conforming to IS:1328(type 1), for plain lining/cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufactures complete job.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.Ssheets and galvanized with zinc coating of 120 gms/sqm (both sideinclusive) as per IS:277 and consisting of angle cleats of size 25 mmwidex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centreto centre, one flange fixed to the ceiling with dash fastener 12.5 mm diax40mm long with 6 mm dia bolts, other flange of cleat fixed to theangle hangers of 25x10x0.5mm of required length with nuts & bolts ofrequired size and other end of angle hanger fixed with G.I. channels45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre tocentre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I.wire at every junction, including fixing perimeter.

channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centreto centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimetre channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointincompound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimetre channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095-Part 1 : 2011 (Board with BIS certification marks)

Providing and laying in position cement concrete brick agg. of specified grade including curing, centring and shuttering with 1:4:8 (1 cement : 4 coarse sand : 8 Bricks aggregate 40 mm nominal size) Flooring including all carriages complete job

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc.complete Size of tile 600x600 mm

Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm ( average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st classhard wood and well matched teak 3 ply veneering with vertical grains or crossbands and face veneers on both faces of shutters 35mm With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with frame of 1st classhard wood and well matched teak 3 ply veneering with vertical grains or crossbands and face veneers on both faces of shutters 35mm With ISI marked M.S. pressed butt hinges bright finished of requiredsize with necessary screws.

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze ofaverage width for aperture 1.4 mm in both directions with wire of dia. 0.63 mmfor doors, windows and clerestory windows with ISI marked M.S. pressed butthinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class deodar wood (35 mm thick).

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size withnecessary screws, all complete as per direction of Engineer-in-charge. Second class deodar wood 35mm thick.

Renewing glass panes, with wooden fillets wherever necessary Float glass panes of thickness 5.0 mm (weight not less than12.5 kg/sqm) complete job.

Providing and fixing stainless steel stair railing grade 304 of approved make (Jindal 304) excluding master pillars.

Providing and fixing stainless steel master pillar for stair (Jindal 304)

Providing and fixing brass curtain rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.25 mm diameter.

Applying two coat of water thinnable cement primer of approved brand and manufacture on wall surface.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing M.S. grills of required pattern in frames of windows etc.with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete.Fixed to openings / wooden frames with rawl plugs screws etc.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work

Earth work in excavation by mechanical means (Hydraulic excavator) over areas (Exceeding 30cm in depth, 1.5mtr in width as well as 10sqm on plan) including disposal of excavated earth to the site of disposal/ dumping as directed by the I/c Engineer disposed earth to be levelled and neatly dressed: All kinds of soil.

Providing and laying in position cement concrete of specified grade including the cost of centring and shuttering 1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) Crushed including all carriages complete job

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in Cement mortar 1:6 (1 cement : 6 coarse sand) In superstructure above plinth level upto floor V level including all carriages complete job

50 mm thick cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete.

Providing and laying in position cement concrete of specified grade including curing, centring and shuttering with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including all carriages complete job

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mmnominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete inclusive of all carriages complete job

Providing and laying Reinforced Cement Concrete 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) in suspended floors, balconies, landings and staircase having upto 15°slope. including cost of centering and shuttering and all carriages (all work upto floor V level).

15mm cement plaster of single side of wall of mix:1 : 4 ( 1 cement : 4 fine sand) finished with a floating coat of neat cement complete job.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. Layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Half brick masonry with bricks of class designation 75 in foundations and plinth in : Cement mortar 1 :4 ( 1 cement : 4 coarse sand in superstructure above plinth level upto floor V level including carriages all complete job

Reinforcement for RCC work including streaightening, Cutting, bending, Placing in position and binding all complete.

Providing & fixing PVC fittings of Supreme / Finolex make Complete job.

PVC Pipe 3"dia

PVC Pipe 4"dia

PVC Pipe 6"dia

PVC Plain Bend 3"dia

PVC Plain Bend 4"dia

PVC Floor Trap

PVC Tee 3"

PVC Tee 4"

Supply and fixing of C.I cover with frame for manholes. For Septic Tank manholes 2'-0''x 2'-0'' heavy duty cover with frame

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 15mm nominal outer dia pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. External work including trenching, refilling etc. 20mm nominal outer dia pipes.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15mm N. Bore

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 15 mm nominal bore

Providing and fixing brass stop cock of approved quality.20 mm nominal bore

Providing and fixing uplasticized PVC connection pipe with brass unions 15 mm nominal bore

Providing and fixing white vitreous china pedestal type water closet (European type W.C . .pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures,complete including cutting and making good the walls and floors wherever requied:W.C. pan with lSI marked white solid plasticseat and lid.

Providing and fixing wash basin with C.I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:White Vitreous China Wash basin size630x450 mm with a single 15 mm C.P. brasspillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back or the reception of pipes and fittings.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Semi Rigid Pipe

Providing and fixing mirror of superior glass(of approved quality) and of required shape and size with plastic. moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453X357 mm

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangement of approved quality and colour:450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing and fixing 100 mm sand cast iron grating for gully, floor or Nahani trap.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x41 Ox265mm sizes respectively

Flexible pipe (Coil shaped) with fittings32 mm dia. with length not less than 700 mm pre waste pipefor sink and wash basin

Providing and fixing PTMT swivelling shower, 15mm nominal bore, weighing not less than 40gms.

Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106gms.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank (Make: Sintex/ Plasto/ Supreme / Vectus)

Constructing brick masonry manhole in cement mortar1:4 ( 1 cement : 4 coarse sand) R.C.C. top slab with1 :2:4 mix ( 1 cement : 2 coarse sand : 4 graded stoneaggregate 20 mm nominal size), foundation concrete1:4:8 mix ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12 mmthick with cement mortar 1:3 ( 1 cement: 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finsihed with a floating coat of neat cement complete asper standard design.Inside size 90x80 em and 45 em deep including C.l. cover with frame (light duty) 455x61 Omm.internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg)With F.P.S. bricks with class designation 75& with (a) Crushed stone aggregate complete item

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable size G.I box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Wire Make: Anchor/Havells/Vguard/Polycab Conduit (Make: AKG/ Anchor/ Finolex/Polypack) Group C

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.Group C Wire Make: Anchor/Havells/Vguard/Polycab Conduit (Make: AKG/Anchor/Finolex/ Polypack)

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required. (Wire Make: Anchor/ Havells/ Vguard/Polycab)

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (Make: Havells/Anchor/schneider/ABB/L&T/ legrand)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Make: Havells/ABB/Legrand/Anchor/ vguard/ L&T/Schneider)

5/6 amps switch

3 pin 5/6 A socket

15/16 A switch

6 pin 15/16 A socket

Telephone socket outlet

Bell Push

TV antenna socket outlet

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (Make: Havells/ABB/Legrand/Anchor/L&T/Schneider)

1 or 2 Module

3 Module

4 Module

6 Module

8 Module

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (Make: Havells/ABB/Legrand/Panasonic/Schneider)

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (Make: Panasonic (anchor)/ Havells/Crompton/Usha/Orient Electric/Bajaj)

Supply, Installation, testing and commissioning of exhaust fan with louvers of folowing size including connection etc as required (300 mm sweep) (Make: VGuard/ Havells/Crompton/Usha/Anchor)

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (Make: Havells/ABB /Legrand/Anchor/Schneider/Vguard)

Supplying and fixing PVC batten/ angle holder including connections etc. as required. (Make: Havells/ABB/Legrand/Panasonic)

Supply of pre-wired, fluorescent fitting / compact fluorescent fitting of T5 batten (20 watt) complete with all accessories. as required.(Make: Havells/Wipro/Crompton/Philips/Panasonic)

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(Make: VGuard/ Havells/ ABB/Anchor/ Schneider/Siemens)

SINGLE POLE

SINGLE POLE AND NEUTRAL

TRIPLE POLE AND NEUTRAL

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: VGuard/ Havells/ABB/Panasonic/Schneider /Siemens)

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make: VGuard/ Havells/ABB/Panasonic /Schneider /Siemens)

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (Make: Havells/ABB/Siemens/Panasonic /Vguard)

8 way (4 + 24), Double door

6 way (4 + 18), Double door

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.01 Run of cable (Make: Dlink/Delton/molex/panasonic)

Supply, installation, testing and commissioning of fire extinguisher ABC Dry powder type of 6 Kg (Ceasefire/Safex/Minimax/Superex)

Supply, installation, testing and commissioning of 4 Megapixel CMOS image sensor, H.264 & MJPEG dual-stream encoding, Max 20FPS@4MP (1920×1080) & 25/30FPS@960P(1280×960), 4mm Lens, Day/Night(ICR), Array IR Distance: 25m,(4MP HD IP SMART IR 25 Mtr Dome Camera with HD Lens) (Make: Honeywell/Panasonic/Hikvision)

Supply, installation, testing and commissioning of 4 Megapixel CMOS image sensor, H.264 & MJPEG dual-stream encoding, Max 20FPS@4MP (1920×1080) & 25/30FPS@960P(1280×960), 4mm Lens Day/Night(ICR), 2DNR, AWB, AGC, BLC,Max. IR Distance: 30m, 1 Array LED , IP66, Mobile Soft: CMOB,(4MP HD IP SMART IR 30 Mtr Bullet Camera with HD Lens) (Make: Honeywell/Panasonic/Hikvision)

Supply, installation, testing and commissioning of RJ-45 Ethernet socket complete withwith accessories etc as required. (Make: Schneider/Dlink/ Havells/Panasonic)

Supply, installation, testing and commissioning of Unmanaged Network Switches (24 port) Minimum 4/8 nos. 10/100/1000 BASE-T Ethernet Ports. Uplink port should have sufficient speed to avoid network congestion, preferably network should not be loaded more than 70% at any stage, fully IEEE 802.3 compliant,Protocols and compliances , The switch should provide all standard protocols and compliances AND Mounting Shall Be Rackmount, wall or desktop mounting options.(Make: DLINK/TP LINK/Hikvision)

Supply, installation, testing and commissioning of NVR , 32 Ch. with Upto 1080p Realtime Live View, H.264/MJPEG dual codec decoding, Max 96Mbps incoming bandwidth, Support 8 SATA HDD up to 32TB, 2 USB2.0, HDMI / VGA simulta video output, Support Multi-brand network cameras, ONVIF Version 2.0 conformance, including software installation as requ ired for Cameras (Make: pelco/ Honeywell/ CP PLUS/ Samsung/Hikvision)

Supply and erection of 1 Mtr Cat 6 patch cord with 23 AWG suitable for Gigabit connection, it should be suitable to maintain the bending radius as per relevant code. (Make: Dlink/ Delton/ molex/ panasonic)

Supply, installation, testing & commissioning of Client Workstation having Intel Core i5 orginal motherboard, 16 GB RAM, Video graphics card 2 GB Licensed Windows 8 Professional (64 bit) and 1 TB Hard Disk with Web camera,Printer and finger print scanner. (Approved Make-HP/DELL/IBM)

Supplying & fixing of 55 Inches Full HD LED Display Monitor complete as per specification and as desired by EIC. (Make with model no: Samsung-UA55AUE70AKLXL /LG- 55UP7720PTY/Panasonic-55UP7720PTY)

Supplying, installation, testing and commissioning of Split Air Conditioner (Hot and Cold) of rating 2 star & above including connections fiiting complete job. The item is inclusive of Outdoor unit wall bracket/Stand for mounting of ODU.(Make:Bluestar/Lloyd/Voltas/LG)

Supply, Installation, Testing and commissiong of LED Flood light 50 watt with IP 65/66 including all accessories as required and as desired by EIC. (Make: Panasonic/Havells/Philips/Crompton)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.(Make: Comet/Cosmos/Baliga/Dowells) 3½ X 50 sq. mm (38mm)

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 35 sq. mm and upto 95 sq. mm

Supply and commissioning Of LT Power Cable 1.1 Kv Grade , XLPE Power cable ( Cable size: 3.5 C X 50 Sqmm)(Make: Havells/Polycab/RR cables/Finolex) Aluminium Armoured Cable (Size: 3.5 C X 50 sqmm )

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. (Make:ISI)

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.(Make: ISI)

Supply of 09/10 watt LED Bulb.( Make: Panasonic/ Crompton/ Wipro/philips/Havells)

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. (Make: Dlink/Delton/ Krone/Panasonic) 2 pairs

Supply and fixing of Step lights - 3w (Make:Panasonic/Philips/Crompton/ wipro/Havells)

Supply, Installation, Testing & Commissioning of recessed/ surface/ concealed LED light of 18 Watt (Make:Panasonic/Philips/Crompton /Havells/wipro)

Supply, installtion,testing and commissioning of 5kva Voltage Stabilizer with wide working range(90/100 v to 290 v) for Air conditioning system. (make: Vguard/Microtek/Philips/Voltas/Luminous)

Supplying, installation, testing and commissioning of online 3 phase UPS system with min 30min battey backup including batteries,interconnecting leads/cables, battery racks and allied accessories etc as required. (Microtek/Schneider Electric/Eaton/Exide/Numeric) Capacity 5 Kva

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (Make: AKG/ polycab/Anchor/Polypack)

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. (Make: ISI)

Providing and fixing of lightning conductor final, made of 25mm dia 300mm long GI Tube, having single prong at top, width 85mm dia 6mm thick GI base plate including holes etc complete as required (Make ISI)

Fixing of lightning conductor final (Single prone) with base plate including holes etc complete as required (Make ISI)

Jointing copper /GI Tape (with another copper/GI Tape, base of the final or any other matallic object) by riveting / nut botting/ sweating and soldering etc as required (Make ISI)

Providing and fixing GI Tape 20mm × 3mm thick on parapet or surface of wall for lightning conductor complete as required (for horizontal run) Make ISI

Providing and fixing GI Tape 20mm × 3mm thick on parapet or surface of wall for lightning conductor complete as required (for vertical run) Make ISI

Fixing of copper / GI Tape 20mm × 3mm thick on parapet or surface of wall for lightning conductor complete as required (for horizontal run) Make ISI

Fixing of copper / GI Tape 20mm × 3mm thick on parapet or surface of wall for lightning conductor complete as required (for vertical run) Make ISI

Providing and fixing testing joint, made of 20mm × 3 mm thick GI Strip, 125mm with 4 No`s of GI bolts, nuts, chuck nuts , and spring washers etc complete as required Make ISI

Supply, installation testing and commissioning of Cassette Type 4 way Air conditiong system -Heat and cool Invereter technology, wide range, Powerful Air flow with 2 star and above rating. The item include indoor , outdoor unit & all accessories with comprehensive warranty on compressor. The item also include Wall/Floor bracket for mounting Outdoor Unit. Make: Bluestar/Hitachi/LG/Samsung

2 Ton capacity AC

Electric cabling between Idu & Odu - communication 2C X 1.5 sqmm

Drain piping of suitable size

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric nitrile rubber tubular sleeves sections of specified thickness as givenbelow for Suction and Liquid lines, all accessories as per specifications etc. as required : Make ISI

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

M/S GANAI CONSTRUCTIONS

m/s thukar const