Construction of BhagabanpurSamsan Chulli shed with Submarshal at Bhaganpur G.P. under Chanchal-I Dev. Block, Malda Mouza-Paschim Bhagabanpur, Plot No-27, Jl No-07 (Activity Code-121296605). Sl.No-12

Earth wok in excavation foundation trenches in all sorts. Depth of excavation not exceeding 1.5 m.

Earth wok in filling in foundation or plinth with good earth including watering and ramming etc. complete.

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level filling joints with powdered earth or local sand.

Filling in foundation trenches or plinths by silver sand in layers not exceeding 150 mm including watering and ramming etc.

Cement Concrete with graded stone ballast (40 mm size) excluding shuttering etc. as per direction of Engineer-in-charge, complete. In 6:3:1 proportion.

1st class brick work in cement morter (6:1) in Super structure GF

125 mm thick brick work in cement morter 4:1 in ground floor

Ordinary cement concrete(Mix 1:1.5:3) with graded stone chips ( 20mm size) excluding shuttering and reinforcement if any. In ground floor

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc. initial….s per drawing and direction.

Hire and labour charges for shuttering and centering including striping off after completion of work in ground floor. (f) 25 mm to 30 mm shuttering without staging in foundation.

25 mm to 30 mm thick wooden shuttering as per decision & direction of E.i.c. IN GROUND FLOOR.

MS or WI ornamental grill of approved design joints continiously welded with MS, WI flat for windows railing etc. fitted and fixed with necessary lugs and screws (Grill weighing above 10/kg/Sq Mtr. And upto 16 Kg/Sq. Mtr. Gr. Floor.

Labour for chipping of concrete surface before taking up plastering work.

10 mm thick cement plaster with cement morter 1:4 in ceiling in ground floor.

15 mm thick cement plaster with cement morter 6:1 in out & inside wall in ground floor.

20 mm thick cement plaster with cement morter 6:1 in out & inside wall in ground floor.

Artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips laid in panels as directed with toping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before works using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping.

Neat Cement punning about 1.5 mm average thick in wall, dado, window, sills, floor drain etc. in all floors in ground floor

Acrylic distemper to interior wall, ceiling with a coat of solvent based interior grade acrylic primer (as per manufacturer's specification) including cleaning and smoothening of surface. Ground Floor & 1st Floor Two coats…..

Applying exterior grade acrylic primer of approved qality and brand on plastered or concrete surface old or new surface to receive decorative textured ( matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the E.I.C. a) One coat. Ground Floor & 1st Floor.

Protective and decorative acrylic exterior emuslsion paint of approved quality, as per manufacturer's specification and as per direction of E.I.C. to be applied over acrylic primer as required. The rate nucludes cost of material, labour, scafolding and all incidental charges but excluding the cost of primer.

M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joints, angle, channel section conforming to IS: 226, IS :808 & SP (6)-1964 connected to one another with brackets, gussets, cleast as per design, direction of E.I.C. complete including cutting to requisite shape and length, fabrication with necessary bolting, metal are welded conforming to IS: 816-1969 & IS: 1995 using electrodes of approved make and brand conforming to IS: 814-2004, haulage, hoisting and erection all complete.

For structural works in roof trusses etc. using joints, channels and angles of specified section.

Asbestos Corrigated sheet work (6 mm thick) fitted and fixed with 9.5 mm dia.

Asbestos ridging (with standard lap) fitted and fixed with necessary hook, , bolts, nuts, washers, etc. complete (a) Close fitting adjustable type.

Priming one coat on steel or metal surface with synthetic enamel / oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality Synthetic Enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc on the surface if necessary.

Providing & fixing concrete sign board as per IRC specification of size 900x750x37 mm thick made with RCC 1:1.5:3 with Pakur variety stone chips reinforced with double layer IRC febric (75x75 mm..m….. Cement concrete shuttering nuts & bolts wahser etc. complete.)

Earth work in excavation of foundation trenches etc. in all sorts of soil (including mixed soil but excluding Laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m as directed. The item includes necessary trimming the sides of trenches, leveling, dressing and ramming the bottom properly including bailing /pumping out water from the bed, as required & directed by the Engineer-in-charge, complete. With depth of excavation not exceeding 1.50 m.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powered earth or local sand, as per direction of Engineer-in-Charge.

Cement Concrete with graded stone ballast (40 mm size) excluding shuttering etc. as per direction of Engineer-in-charge, complete. In 6:3:1 proportion.

Earth work in filling in foundation trenches or plinth with good earth in layer not exceeding 150 mm. including watering and ramming etc. layer by Layer complete. Earth obtained from Excavation of foundation. [Ref : Building Works, Item 03,a. Page 01]

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc…………………………………………….16gauge black annealed wire at every intersection, complete as per drawing, complete and direction. [Ref.: Building works: item no-40, page no-43, 2nd. corrigenda & addenda]

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor).

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor.

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface].(ii) With 1:4 cement mortar. (c) 10 mm thick plaster.

Supplying, fitting & fixing best quality digital printed Ceramic tiles in coloured decorative on walls and floors to match with the existing work & 4 nos. key stones (10mm) fixed with adhesive 4.5 mm thick at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including oughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With polymerised adhesive and epoxy grout pointing including spacer - 2mm (When tiles are laid over existing hard ready surface) all complete as per direction of Engineer-in-charge.

Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (ii) 100 mm dia. boring etc. top enlargement

(i) 50 mm dia. boring etc.

Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). a) 100 mm dia

b) 50mm dia

c) 40 mm dia

Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications. ii) 50mm dia

Supplying, fitting and fixing steel cutter piece upto 450 mm long with sockets.

Supplying and installation of K.S.B. Sub mersible pumpincluding connecting cable paneletc allcomplete.

S/F&F PVC insulated & sheathed flexible three core flatcables of area 2.50mm sqm as per standard &bunched Type Aof IS 5831/1984 & sheathing to IS 8130/1984 for higher flexibilityare used to connectunderwater as per STI Type of IS 5831/1984.

S/Fand F Single phasing VOLTAGESensingnPREVENTER& AUTO START UNIT Submersible pumpcontrol panel (1/2 H.P. to 2.0H.P.range) of L&T brand of an influential electronic circuit which keeps three stage worked electrical machinesfrom single stage cut off,stage succession inversion and lopsided voltage.

Supplying, fitting and fixing G.I. cap at top (i) 100 mm

(L) Reducing Socket (100mm X 50mm)

Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required

Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete

Quotation &electric main line connection charge includingdistributionwire in1.1kv grade single core standard FR PVC copper wire in30 mm size PVC rigid conduit FR and otherincidental charges in this connection.

Supplying& fitting 240 V 32 AD.P. Mainswitch of Havels made

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer a) 1000 litre capacity

Labour for hoisting plastic water storage tank. (i) Upto 1500 litre capacity.

Labour for punching hole in plastic water storage tank upto 50 mm dia.

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work A) (ii) 15 mm dia. medium quality

(ii) 20 mm dia. medium quality

(ii) 25 mm dia. medium quality

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). a) 25 mm dia

Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).

(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar

Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making acessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials.With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia.(SAIL/TATA/RINL)

Cost of electrification

Sub Total