works for effecting services in various schemes in Pappampady section in Omalur division

Amount

Work contract schedule

Excavation of pole pit upto 27' (8.0 m) Pole by using JCB or manual

Stay pit 4.5' to 5' depth by using JCB or manual

Excavation of pole pit above 8.0 Mtr pole PSC/RCC/RSJ pole by using JCB or manual

Hard rock without blasting (Where houses are located)upto 27inch

Hard rock without blasting (Where houses are located)upto 9m and above

Erection of PSC/ RCC poles/Metal poles upto 8.00m. (27') by using JCB or manual

Erection of PSC/ RCC poles/Metal poles above 8.00m by using JCB or maual

Erection of stay set complete

Fixing of HT/LT TI Fittings

Fixing of HT 'V' X arms/ Channel X arms,Guarding X arms

Fixing of HT Pin Insulators - 22 KV

Fixing of HT 11 KV Strain disc

Fixing of LT 3 phase cross arms

Fixing of LT Single phase cross arms

Fixing of LT Pin insulators

Fixing of Shackle

Fixing of Aluminium Knob

Paving , Stringing, Binding & Jumpering of ACSR 7/4.09 mm

Paving , Stringing, Binding & Jumpering of ACSR 7/3.35 & AAAC 7/3.15 mm

Paving , Stringing, Binding & Jumpering of ACSR 7/2.59 mm & ACSR 7/2.11 mm AAC 7/2.50

Sleeve concreting including materials (Cement + River Sand/ M sand and Blue metals and watering) PCC 1:3:6 with 20mm HBG

Transport of poles/Materials/ Conductors (Excluding loading & Unloading charges) Below 8 Kms

Loading of line materials

Unloading of line materials

Loading of PSC poles 8M & 9.14m

Unloading of PSC poles 8M & 9.14m

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual beyond 100 m

Labour charges for alteration of Back clamp

Labour charges for alteration of Stay clamp

Labour charges for Cutting a full grown tree (all type of trees) & removing out of the loc. In full

Labour charges for Drilling of hole in channel only 3/4" & 1" per hole

Labour charge for Cutting of Channel/ Angle/Flat

Erection of Single Pole Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pit with collar including painting of metal parts, structure poles, fixing of tapping channel, transformer bed structure including concreting (Except erection of Transformer)

Loading or unloading of Transformer above 63KVA and upto 250 KVA

Erection of New Transformer all capacities (with jumpering)

Earthing of pole with coil earthing including burying looping and binding.

Dismantling of Pole 8.0 Mtr

Releasing of grills from RCC Poles

Releasing of single phase service and re-fixing.

Releasing of 3 phase service and (upto 50 HP) re-fixing.

Dismantling of HT V Cross arms(all type)

Dismantling of HT 22KV Pin Insularors

Dismantling of HT 22KV Strain Disc

Dismantling of LT 1 PH X arm

Dismantling of LT 3 PH X arm

Dismantling of LT Shackle

Dismantling of LT Pin insulators

Dismantling of Alu Knob

Dismantling of Stay set complete

Dismandling of ACSR 7/3.35mm conductor

Dismandling of ACSR 7/2.59mm & 7/2.11mm conductor

G.S.T. @18% should be Entered by the Bidder