Providing Pre-Painted sheet roofing over Health Centre and providing Internal Essential repair to the Building in HP University, Shimla-5.

Amount

Dismantling roofing including ridges, hips, valleys, gutters etc. stacking the serviceable materials and disposal of un-serviceable materials within all lead and lifts. a)G.I. Sheet roofing

Dismantling steel work upto span of 10 metres and a height of 5 metres in built up sectional in angles, tees, flats and cha nnels including all gusset plates, bolts, nuts, beading etc. and stacking the materials within all lead and lifts. a Including dismembering.

Providing and fixing 20 cm wide 60 cm overall semicircular gutters 0.60mm thick pre-painted steel sheet roofing.

Providing and fixing 0.60mm thick pre-painted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with pre-painted iron J or L hooks, bolts and nuts 6mm dia metre with pre-painted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge

Providing and fixing ridges or hips 60 cm overall with 0.60mm thick pre-painted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 20 microns over 5 microns primer coating + back coat of polyester of 5 microns over 5 microns primer coating including fixing with pre-painted iron J or L hooks, bolts & nuts 6mm dia & pre-painted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges.

Providing and fixing flushing 38cm overall with 0.60mm thick pre-painted sheet(Tata or Jindal) in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with pre-painted iron J or L hooks, bolts and nuts 6mm dia meter & pre-painted G.I. limpet & bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge

Providing and fixing valley 60 cm overall 0.60mm thick pre-painted steel sheets (Jindal /Tata) in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyester organic coating of 5 microns over 5 microns primer coating of back coat of polyester of 5 microns over 5 microns primer coating including fixing with pre-painted iron J or L hooks, bolts & nuts 6mm dia with prepanted G.I.limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing and fixing on wall face PVC(D-Plast) Rain Water Pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete a)150mm dia pipe

Providing and fixing on wall face PVC (D-Plast) Accessories for rain water pipes including filling the joints with approved adhesive complete a) PVC Plain bend 150mm dia.

b) PVC corner type bend 150mm dia.

Providing and fixing M.S.holder bat clamps of approved design to C.I. or S.C.I pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall etc. a) 150 mm diametre for C.I.pipe

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint: a)In beams, joists, channels, angles, tees flats with connecting plates work plates or angle cleats as main and cross beams, hip and jack rafters, purlins connected to common rafters and the like. a )Structural Steel will be supplied by the department at site

b)Structural Steel will be supplied by Contractor at site

Providing and fixing M.S.BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely).

Half brick masonry (2nd class) using common burnt clay building bricks in Cement mortar 1:3 (1 cement:3 sand).in super structure

15mm Cement plaster in single coat on the Rough/Fair side of brick/ concrete/ stone walls for interior plastering including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth up to all heights including all lead & lifts : b) Cement mortar 1:4 (1 cement:4 sand).

Providing and fixing partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately. a) Cement bonded particle board.6 mm thick.

Dismantling doors, windows and clerestory windows, ventilators etc. (wood or steel) shutters including chowkhats, architraves,hold fast and other attachments etc. complete and stacking them within all lead & lift. a) Not exceeding 3 sq.m in area.

b) Exceeding 3 sq.m in area.

Taking out doors, windows and clerestory windows shutters (steel or wood) including stacking within all lead and lift . a) Not exceeding 3 sq.mm in area.

Taking out door shutters and re-fixing the same i/c providing necessary hinges & rigidly fixing doors with proper welding to existing angle iron frames so as to ensure their proper opening/ closing and locking complete as per direction of the Engineer-in-Charge.

Taking out window shutters and re-fixing the same i/c providing necessary hinges & rigidly fixing windows with proper welding to existing angle iron frames so as to ensure their proper opening/ closing and locking complete as per direction of the Engineer-in-Charge.

Providing wood work in frames of doors, windows, clerestory, windows and other and other frames wrought, framed and fixed in position: 2nd class deodar wood

Providing and fixing paneled glazed or paneled and glazed shutters for doors window and clerestory windows including black enameled iron butt hinges with necessary screws:a)35mm thick 2nd class deodar wood

Providing and fixing 19mm thick Commercial Board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc. complete..

Providing and fixing anodized Aluminum Sliding door bolts anodized colour and shade with bolts and nuts screws etc. Complete. (a) 250X16 mm

Providing and fixing Aluminum Tower Bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete: a) 250X10mm.

Providing and fixing aluminum handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. a) 125 mm

Providing and fixing oxidized M.S. hooks and eyes a) 200 mm

Coloured glazed tiles 6mm thick in skirting risers of steps and dado 12mm. thick cement mortar 1:3 (1 cement:3 sand) and jointed with cement slurry.

Kota stone slab flooring 20mm (average)thick base of cement mortar 1:4(1 cement:4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. a) 25mm thick

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. a) Enamel paint other than white.

Painting one coat (excluding priming coat) on previously painted steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. a) With enamel paint other than white.

Extra for every subsequent coat of paint a) With Enamel paint other than white.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting. a) Ready mixed paint brushing with white lead for priming

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping. a) With enamel paint other than white.

Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces with enamel paint to give and even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping a) With enamel paint other than white.

Extra for every subsequent coat of paint a) With Enamel paint other than white.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete upto all height.

Applying Birla or equivalent white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer.

Applying priming coat on new concrete/masonry/asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with : a) Ready mixed primer

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima))or its equarelied on undecorated wall surfaces (two coats) to give an even shade and final dinish after thoroughly clleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smoth complete.

Supplying and fixing glass panes with putty and nails including removal jof broke glass panes wherever necessary: a)Plain glass 4mm thick.

Providing and fixing plain square edged cover fillets (beading) 40mmx12mm section with wood screws in ceiling land lining including mitring at junctions. a) Ist Class Deodar Wood

Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections joints mitred and welded with 16x3.15 mm lugs 10 cm long embedded in cement concrete blocks 15cmx10cmx10cm size of 1:3:6(1 cement:3 sand:6 graded stone aggregarte 20mm nominal size)or with wooden plugs and screws or raawl plug and screws or with fikxing clips or with bolts and nuts as required and iron fittings, including providing and fixng of glass panes with glazing clips and special metal sesh putty. a) Fixed steel windows.

Removal of slips in all kinds of soil (including saturated soil but excluding boulders and rocky prtion requiring blasting upto a distance of 20 metres disposing of un-servicable materials, stacking serviceable materials and neatly dressing the surface..

Providing Plinth Protection 50mm thick in cement concrete 1:3:6 1 Cement: 3 Sand : 6 Graded stone aggregated 20mm nominal size).

Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground.

Demolition below G.L.upto 1.50 mtr depth including disposal of Un-serviceable materials within all lead and lift. a)Un-reinforced cement concrete more than 15cm. Thickness

DEVENDER KUMAR

AJAY SHARMA

SEEMA VERMA

Sanjeev thakur