Providing, Supplying, Erectioin, Testing and Commissioning of Pole and Xmer at Gayatri Vihar. File No.15/25X6/4.

Supplying &fixing of aerial bunch cable accessories tension clamp (dead end) i/c required attachment for single core cable of approved make in air with clamp, necessary material as per specification for required size.

Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size.

Supplying and erection of galvanised stayset for 11kV overhead line complete with 19/20mmdiax1.8meters long stay rod,anchor plate of size 45cmx45cmx7.5mm thick,thimble,stay clamps,turn buckle(20mmx600mm), 7/4.00mm dia G.I.stay wire and 11kV strain insulator etc. in cement concrete 1:3:6(1cement:3coarses and:6graded stone aggregate 40mm.nominal size)foundation including excavation and refilling etc. as required. (FOR HT END POLE & TRIANGLE)

Supplying, installing, or stay wires (i) 7/4.00 mm (7/8 SWG)

Supplying,installing,testing of earth Coil(coil of 115 turns of 50mm dia,and 2.5 Mtrs. Lead of 4 mm G.I wire.

Supplying &fixing of spring loaded busbar screwless connector with enclosure of approved make including required clamp, nut, bolt, connection, testing as per specification to complete the job.Single phase 1Ph, 1In+2Out

Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminium solid/stranded conforming to IS-14255- 1995, alu. alloy insulated messenger 1100 volts grade cable of approved make in air with necessary material as per specification of required size as mentioned below –3x150 sq.mm, 1x35(st. light), 1x95(insulated neutral messenger

Supply of support for overhead line H-beam of I.S. standard including welding, drilling of required hole etc. complete as required. R.S. Joist 175 x 90 - 19.3 kg per meter 9.3 mtr long (LT pole 9.3 MTR LONG)

Supply of support for overhead line RS joist/H-beam of I.S. standard including welding,drilling of required hole etc.complete as required. H-Beam 152x152mm , Std weight 37.1 kg per meter

Erection of steel tubular or steel rail pole or H-Beam of length exceeding 8 meter sbut not exceeding 10 meters in cement concrete 1:3:6(1cement:3coarses and:6graded stone aggregate 40mm nominal size) foundation, base padding & muffing including exacavation and refilling etc. as required.(4.55 bags of cement/cmt.)

Erection of steel tubular or steel rail pole or H-Beam of length exceeding 10meters butnot exceeding 13meters in cement concrete 1:3:6(1cement:3coarses and:6graded stone aggregate 40mm nominal size) foundation, basepadding & muffing including excavation and refilling etc. as required.(4.55 bags of cement/cmt.)

Supplying of channel iron 75mmx40mmx7.14kg/Mtr.V-shape cross arm for two 11kV overhead line conductors complete with 50mmx6mm M.S.flat iron clamp,bolts and nuts including drilling holes for insulator pins,bolts and nuts etc.and painting with primer and finish paint as required.

Supplying and erection of 11kV disc insulator for 11kV overhead lines with galvanised insulator fittings,ball and socket type,and complete with galvanised strain clamp, bolts,nuts washer etc.as required.

Supplying,installing,testing of 11KV D.O.fuse assembly with brass part contactfor 11/0.4KV DP Structure set of 3 with fuse with barrel with required fuse element & other materials as per specification on existing D.P.structureas required. (set of 3nos.)11kV (1SET IN 1 TRANSFORMER)

Supplying, installing, testing and commissioning of Lightning Arrestors (i) 11 KV Gapless, line type

Supplying of two lengths of channeliron75mmx40mmx7.14 kg/mtr.Double pole cross arm for three wire 11kV over head line conductors complete withth rough bolts and nuts for clamping to the poles,50mmx6mmm.s flats weldedon one side to the channel iron and with bolts and nuts on the other side fortying the cross arms to gether,including drilling holes for insulator pins/fittings,bolts and nuts etc. and painting with primer and finish paint as required.

Supplying of channeliron75mmx40mmx7.14Kg/Mtr. cross arm for two 11kV overheadline conductors complete with 50mmx50mmx 6mm angleiron bracket welded to the channel iron and complete with 50mmx6mm M.S.flat iron clamps,bolts and nuts including drilling holes for insulator pins,bolts and nuts etc.and painting with primer and finish as required.

Supplying and fixing 33/11/0.4 KV enamel coated danger board size 200x250mm with clamp on existing HT/LT structure/poles.

Supplying, installing, testing and commissioning of LT Distribution Box with TPN isolator 200 amper on incoming,bus bar and 66 S.P.M.C.C.B.of 60 A" .on outgoing side for 63 KVA transformer (i)Supplying, installing, testing and ommissioning of LT Distribution Box with TPN isolator 600 amper on incoming,bus bar and 6 S.P.M.C.C.B.of 90 A" .on outgoing side for 200 KVA transformer(EACH IN 1 TRANSFORMER)

Supplying in stalling andtesting of AB isolating switchass embly set gang operated suitable for 11/0.4KV,DP structure with brass par tcontacts, operating rod with required GI pipe,handle locking arrangementon On-Off position conforming to IS complete with required material and installing on existing structure to complete the job as required as per specification.11 kV (1SET IN 1 TRANSFORMER)

Supply, installation, testing & commissioning of KWh meter with LCD display (for energy metering) 5 - 20A, 3 Phase 4 Wire, 440 Volts, accuracy class 1 duly tested from electricity board with uPVC BOX.

Suppying&installing G.I.Pipe for protection of underground cable fixe don wall/support/intrench/fixed between two rigid existing support of wall/beam for erection of ceiling Fan/downrod for stiff pendent for light luminaries/fan/ protective for earthing,lightening conductor down strip/ everheads erviceline/for submercable or centrifugal pump for water supply with necessary iron clamp coupler, bend, te,elbow,nuts and bolts etc.complete in an approved manneras required to complete the jobe xcluding cost of excavation/dismantling & other finished masonaryI tem complete.For 'B' Class G.I.pipe ISI Marked (IS-1161-68) 40.00mm

Providing back filling compund suitable for safe earthing device.

Supply & fixing anti climbing device with 2 ply G.I. barbed wire 1 Kg. per pole complete as per MPMKVVCO. Specification.

Supplying,installing,testing and commissioning of11/0.4 K. V.3Phase 50 Cycle oil immersed,naturally cooled,out door type transformer connected delta on H.T.side and star on L.T.side hand operated of fload,Tap changer switch,above 100kVA rating and diagram plate,two earthing terminal, lifting lugs,oil levelguage, drain valve with plug, temperature not exceeding 50ºCon load,oil conservator with drain plug,oil filling hole with plug dehydrating silica gel breather,four unidirectional roller,arcing horns, explosion vent,terminal arrangement bushing on H.V.side and cable box on LV side,first filling of oil upto desired level and transformer in stalling on existing structure with all Required materials arrangements as required as per IS specification. Aluminium wound 200 kVA

Supplying and erecting earthpit of minmum bore dia 150m m size,approved make safe earthing electrode consiting pipe in pipe tecnologie as per IS 3043-1987made of corriosion free GI pipes having outer pipe dia of 50mm having 80-200micron galvanising,inner pipe dia of 25mm having 20-250 micron galavinsing,connection teriminal dia of 12mm with constent OHMIC value sourrounded by highly conductiv compund with high charge disipation sutible for effective and maintence free earthing with2mtr. Pipe innormal soil with 25kg(onebag)back filling compound

Clamps for neutral for AB Cable