Annual Rate Contract for repairing works of Schindler make escalators installed at different metro stations of Line-01, 03 and AEL for a period of 3 Years.

Total of Schedule-1

APPENDIX- 3A

PROFORMA FOR STATEMENT OF MINOR DEVIATIONS

(Refer Clause C 2.2(d) and C 15.1 of ITT)

1. The following are the particulars of minor deviations from the requirements of the Tender Document:

1. The Tenderer shall indicate price adjustment against each deviation in Annexure-3A of BOQ. This price is the price which the tenderer shall reduce from this tender price if deviation(s) is/are accepted by the Employer.

2. Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No Deviations’. In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the tenderer has not proposed any deviations from tender documents.

3. If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender, other than in this Annexure, it will have no effect.

Signature of authorized signatory

On behalf of Tenderer

PREAMBLE

The bill Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to tenderers, General and Special Conditions of Contract, Employers Requirements & Technical Specifications and other relevant documents.

BoQ1 consist of single schedule as detailed in Tender documents for a period of 3 years

The rates and prices to be tendered in the unit Priced Bill of Quantities are for completed and finished items of works and complete in all respect.

Tenderers shall quote their offer in Indian Rupees (₹) only. Tenderer should quote above/below/at par in figures in appropriate highlighted cells in the BoQ1 sheet. If the tenderer fails to quote percentage (above /below/at par) , The tenderer may be treated as incomplete and non- responsive and shall be rejected.

All the quoted rates will be deemed to include Duties, Taxes, Octroi, Royalty etc., cost of all plants, labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification, contractor’s profit and establishment/ overheads, together with preparation of design and drawings, all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the contracts. For taxes and duties refer clause C2.4 & C2.5 of ITT & clause 09 of SCC.

Errors will be corrected by the employer for any arithmetical errors in computation or summation as per contract conditions.

The payment for the work executed against all the BoQ items as detailed in tender document shall be made on accepted rates as per payment clause 14 of SCC.

The work executed against all the BoQ items as detailed in tender document would be paid as per payment clasue 14 of Special Conditions of Contract (SCC).

Item(s) against which no price(s) is/are entered by the tenderer will not be paid by the employer when executed and shall be deemed to be covered by the prices of other items.

Unless stated otherwise in the tender documents, the contract shall be for the whole of the works as described in the tender documents.

During the currency of the contract, the successful tenderer shall be required to procure necessary insurance policies as stipulated in terms & conditions of the contract refer Clause No. 15 of SCC.

The employer shall deduct at source from the bills of the contractors any amount which employer may require by law for deposition with the satutory authorities in India. The employer shall further furnish to the contractor a certificate for such tax deducted at source.

Change/ Variations in Taxes and duties:- Change in Taxes/Duty: The provision of GST applicable at present rate shall be considered and actual GST at the time of execution of shall be paid. Price variation on account of any statutory changes in GST shall be payable. Any additional new tax (if imposed in future and applicable for this type of contract) shall be paid extra by DMRC accordingly as per the provisions of new tax.

Delhi Metro Rail Corporation Limited

Bill of Quantity (BOQ)

Contract: OEM-2083: "Annual Rate Contract for repairing works of Schindler make escalators installed at different metro stations of Line-01, 03 & AEL for a period of 3 Years"

Schedule-1

Repairing of gear Box by replacing of bearing and fixing of oil seal including dismantling and reinstallation of gear box.

Replacement of Bottom Shaft Bearing (bearing provided by DMRC)

Replacement of Handrails shaft bearing including repairing of Handrail Shaft if required (2 Nos. of Handrail Shaft Bearing Shall be provided DMRC)

Repairing and Replacement of Motor Bearing & Motor Cover (Bearing shall be provided by Firm)

Repairing and Replacement of Motor Bearing (Bearing shall be provided by Firm)

Repairing/Rewinding of Service brake Coil

Repairing of Safety Brake (Coil & Switch)

Repairing of Safety Brake ( Switch)

Welding of Escalator Handrail Metallic Profile(Straight)

Requirement of Handrail shaft Bearing for replacement

Repairing of endcover of motor

Repairing of C-Track including welding, Grinding & Buffing.

Fixing of hinges with new nut bolts and grinding & buffing of floor cover

Pasting & Riveting of main floor cover.

Pasting & Riveting of floor Cover Make up sheet.

Pasting & Riveting of Comb Carrier Sheet

Grinding & Buffing work for rectification of Floor Cover overlapping.

Replacement of GI sheet for bottom pit as per required size

Repairing of Curve handrail Profile by welding with strip.

Fabrication and fitment of bottom left and top right 1st straight handrail profile

Fabrication & fitment of top right newel end.

Fabrication & fixing of Handrail Plastic Profile With Metal.

Fabrication of cone clamping element for fixing of friction wheel.

Repairing of Reversing Wheel with fabrication of new housing and filling of metal including turning and finishing work.

Painting of Comb strip

Painting of C type for schindler escalator step

Repairing of Newel End by replacement of all its Bearing (Bearing shall be provided by Firm) for glass balustrade esc

Motor Coupling Bush Replacement (Bush shall be provided by Firm)

Motor Coupling Bush and assembly repair with replacement of bearing (Bush & Bearing shall be provided by Firm)

Repair of Friction Wheel

Repair of NGP/NGL card

Repairing of motor by rewinding, replacement of its end cover and repalcement/repairing of its rotor

Repairing of Main/Return step Track including welding, Grinding & Buffing.

Fabrication of Spring Tension Rod

Providing of scaffholding (including installation & dismantling) and its assemblling with labour for repairing of Soffit claddings/ angles/ welding and cleaning of soffit clading or fixing of soffit light wherever required

Inner Cladding repairing & Pasting

Fabrication and installation of Interlocking arrangement of Escalator floor plates for Schindler make Escalators

Floor cover (make up piece) support angle supply and fixing with new s.s nut bolts.

Floor cover (make up piece) support angle rusting removing, painting and refixing with new s.s nut bolts.

Straighting, fabrication and repairing of pressure belt assembly base plate

Repair/replacement of Escalator control panel lock

Comb carrier leveling bolt filling and threading work

Step guard plate holding angle fabrication, supply and fixing

Floor cover support rod fixing by making new hole and threads

Supply and replacement of Floor cover opening hexagonal nut

Fabrication and supply of ss Floor cover opening T-bolt

Supply and fixing of pit light assembly with bulb

Supply and fixing of main motor terminal plate

Fabrication of Floor cover frame welding work

Fabrication of Handrail pressure belt tension rod with nut and check nut

Fabrication and fixing of escalator floor plate hinge

Fabrication of E break dust tray with hardware

Making hole and taping of spindle for fixing of reversing wheel.

Escalator skirt panel cutting, grinding and stud welding work

Supply, Fabrication & Fixing of Escalator control panel filter

Supply , Fabrication & fixing of Escalator control panel filter grill cover

Fabrication and supply of V groove pulley

Welding and buffing of step roller track and chain roller track

Repairing of Bottom Shaft Wheel Sprocket

Repairing of Handrail Shaft without Bearing

Repairing of Reversing wheel Shaft

Total amount of Schedule-1 (exclusive of GST)

TOTAL amount of Schedule-1 (Inclusive of GST)