Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.0 LAccepted-AOC SR NO 281 3 7 ANAND NAGAR NEAR DHANORI JAKAT NAKA LOHEGAON PUNE 411047 | PUNE | PUNE | MAHARASHTRA | 411047 | L1 | Accepted-AOC Being overall reasonable | |
| 2 | L2₹33.0 L+₹1.6 L (5.06%)Rejected-Finance FLAT NO 203 SEC 14 PLOT NO 142 SHIVSRUTI PARK APARTMENT E WING 1ST FLOOR MOSHI PRADHIKARAN TAL HAVELI DIST PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L2 | Rejected-Finance Not Lowest Bidder | |
| 3 | L3₹34.2 L+₹2.8 L (8.98%)Rejected-Finance | L3 | Rejected-Finance Not Lowest Bidder | |
| 4 | L4₹35.4 L+₹4.1 L (13.0%)Rejected-Finance GATE NO 454 01 TAPKIR NAGAR PUNE NASIK HIGHWAY NEAR GANDHARV NAGARI MOSHI PUNE 412 105 | PUNE | MAHARASHTRA | 412105 | L4 | Rejected-Finance Not Lowest Bidder | |
| 5 | L5₹35.8 L+₹4.4 L (14.1%)Rejected-Finance | L5 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
4 Sept 2023, 6:00 pmClosed
GE CENTRAL KHADKI
GE CENTRAL KHADKI RANGE HILLS ROAD KHADKI
REPAIRS / MAINTENANCE OF CI/DI/GI PIPE LINE, PUMP MOTORS AND OTHER CONNECTED ITEMS AT DUNKIRK LINE AREA UNDER AGE E/M-I AT GE (CENTRAL) KHADKI.
2023_MES_604708_1
8847/E8 OF 2023-2024
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
DUNKIRK LINE area
AS PER NIT
7 documents required · 7 mandatory
₹500
GE CENTRAL KHADKI
₹90,000
Yes
9 Nov 2023
21 Jun 2023
7 Sept 2023
21 Jun 2023
4 Sept 2023
22 Aug 2023
21 Jun 2023 - 1 Jul 2023
Amount
Excavation in trenches not. exceeding 1.5 mtr wide and not exc 1.5 mtr in depth and getting out in soft/loose soil for GI/CI pipes all as directed.
Description all as per item No. 1 above but in hard/dense soil
Returning filling in trenches including spreading leveling watering and well ramming in layers not exceeding 25 cm all as directed.
Removing of surplus soil and depositing to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as directed by Engr-in-Chagre.
Taking up or down 15 mm dia GI water tubing including all necessory connections/fittings as specified and directed by Engineer in Charge.
Description all as per item No.5 above but 20 mm dia pipe.
Description all as per item No.5 above but 25 mm dia pipe.
Description all as per item No.5 above but 40 mm dia pipe.
Description all as per item No.5 above but 50 mm dia pipe.
Description all as per item No.5 above but 80 mm dia pipe.
Description all as per item No.5 above but 100 mm dia pipe.
Description all as per item No.5 above but 150 mm dia pipe.
Relaying and refixing the 20mm dia GI pipe after descaling / cleaning complete with the help of water & brush of the following size / bore obtained from Sl item No 6 above and connect in old / new positions, laid in trenches fixed on wall on floor including of new fittings such as bends, tee, unions, elbows, sockets etc complete all as specified and as directed.
Description all as per item No.13 above but 25 mm dia pipe obtained from Sl item No 7.
Description all as per item No.13 above but 40 mm dia pipe obtained from Sl item No 8.
Description all as per item No.13 above but 50 mm dia pipe obtained from Sl item No 9.
Description all as per item No.13 above but 80 mm dia pipe obtained from Sl item No 10.
Description all as per item No.13 above but 100 mm dia pipe obtained from Sl item No 11.
Description allas per item No.13 above but 150 mm dia pipe obtained from Sl item No 12.
Supply and fix 15 mm dia GI tubing medium grade ISI marked fixed on wall, roof, floor complete with all accessories such as Tees , union , bend ,elbow ,nipple, reducer etc, all as required at site for branch connection including cutting threading complete all as specified and directed by Enginner-in-Charge.
Description all as per item No.20 above but 20 mm dia pipe.
Description all as per item No.20 above but 25 mm dia pipe.
Description all as per item No.20 above but 40 mm dia pipe.
Description all as per item No.20 above but 50 mm dia pipe.
Description all as per item No.20 above but 80 mm dia pipe.
Description all as per item No.20 above but 100 mm dia pipe.
Description all as per item No.20 above but 150 mm dia pipe.
Material and labour for 20 mm dia galvanized iron water tubing medium grade ISI marked in trenches complete with all accessories such as Tees union,bend,elbow nipple reducer etc all as required at site for branch connection including cutting threading complete all as specified and directed by Enginner-in-Charge.
Description all as per item No.28 above but 25 mm dia pipe.
Description all as per item No.28 bove but 40 mm dia pipe.
Description all as per item No.28 above but 50 mm dia pipe.
Description all as per item No.28 above but 80 mm dia pipe.
Description all as per item No.28above but 100 mm dia pipe.
Description all as per item No.28 above but 150 mm dia pipe.
Supply and fix in trenches/fixed to wall HDPE pipe 15 mm bore with all fittings such as tees,union, bend, elbow, nipple, etc including taking down old complete all as specified and directed by Engr-in-Charge
Description all as per item No. 35 but of size 20 mm bore complete all as specified and as directed.
Description all as per item No. 35 but of size 25 mm bore complete all as specified and as directed.
Description all as per item No. 35 but of size 40 mm bore complete all as specified and as directed.
Description all as per item No. 35 but of size 50 mm bore complete all as specified and as directed.
Supply and fix in replacement of 15mm bore dia gun metal gate / globe valve with iron wheel head screwed both ends for iron pipe fixed complete all as specified and directed by Engr-in-Charge
Description all as per item No. 40 but of size 20 mm bore complete all as specified and as directed.
Description all as per item No. 40 but of size 25 mm bore complete all as specified and as directed.
Description all as per item No. 40 but of size 40 mm bore complete all as specified and as directed.
Description all as per item No. 40 but of size 50 mm bore complete all as specified and as directed.
Description all as per item No. 40 but of size 80 mm bore complete all as specified and as directed.
Material and labour cutting of roads / plinth for removal / laying of pipe and making good the disturbed surfaces as per existing adjoining surfaces. Note: PCC will be measured and paid separetely.
Material and labour for PCC 1:3:6 type-C2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete incl necessary form work wherever required and incl demolition of Cement Concrete (un-reinforced) of any description and in any position not otherwise specifically provided for, all as specified and directed at site.
Material and labour PCC in 1:2:4 type B 1 by using 20 mm graded stone aggregate for making good road/foot path/hard standing/drain/ bldg plinth protection and foundation for motors, pumps and starters all as per site requirement and as directed by Engr-in-Charge.
Material and labour for construction of valve pit with 23 cm thick brick wall work in CM 1:4, rendering 15 mm thick plaster in CM 1:4 internally, including pcc coping 1:2:4 type B2 (20 mm graded stone agg),150 mm thick PCC 1:4:8 type D2 (using 40 mm graded broken stone aggrigate) in sub base of floor, 50 mm PCC 1:2:4, type B1 (20 mm aggregate crushed stone aggregate) in floor finished even and smooth with out using extra cement complete with and including mild steel sheet cover 3mm thick and angle iron frame of size 40x40x6mm duly painted with two coats of synthetic enamel paint over a coat of red oxide primer and including locking arrangement and lifting handle all as specified and shown on drawing of size 900X900X1000 mm (internal dimensions). NOTE :- Cost of Earth work including excavation in any type of soil,getting out, refilling after construction and disposal of surplus soil and MS cover all is included in quoted rates.
Description all as per Item No.49 above but size of valve chember 1200mmx1200mmx1000 mm
Burning out leaking lead joints in position including removing of old lead for 100 mm dia bore of pipe complete all as specified and as directed .
Description all as per item No 51 above but 150 mm dia bore of pipe
Description all as per item No 51 above but 200 mm dia bore of pipe
Material and labour for run lead joints for 100 mm bore CI pipes / fittings complete with necessary jointing material such as lead and spun yarn for jointing of pipes all as directed by Engr-in- charge.
Description all as per item No 54 above but 150 mm dia bore of pipe
Description all as per item No 54 above but 200 mm dia bore of pipe
Disconnecting / taking out unservicable stainless steel spindal with wedge nut and supply and fixing new stainless steel spindal with wedge nut includilng all fixing nut and bolts and all fixing material as required at site complete all as specified and directed by Enginner-in-Charge for sluice valve of size 80 mm dia
Description all as per item No 57 above but 100 mm dia bore of pipe
Description all as per item No 57 above but 150 mm dia bore of pipe
Description all as per item No 57 above but 200 mm dia bore of pipe
Supply and fix 100mm dia bore cast Iron air valves with two air outlets and fixing up in cast iron water supply mains complete all as specified and as directed by Engr-in-Charge.
Description all as per item No 61 above but 150 mm dia bore of pipe
Description all as per item No 61 above but 80 mm dia bore of pipe
Dismantling / disconnecting of following unserviceable sluice valve assembly complete by removing old nut bolts packing sheet etc and supply & fix new 100 mm dia CI Sluice valve with stainless steel spindle PN-1.6 ISI marked IS No.14845-2000 including jointing material nut bolts packing all as per site requirement even machining work if required and as specified and directed by Engr-in-Charge. MAKE :- Kartar/ Balaji / Venus / BIR or as existing specification and make at site etc.
Description all as per item No 64 above but 150 mm dia bore of pipe
Description all as per item No 64 above but 200 mm dia bore of pipe
Material and labour for welding of starter panel/panel/wall chamber sheet/ frame panel/ steel ladder including cleaning and preparing the surfaces to be welded together complete as per site requirement and as directed by Engr-in-Charge.
Repair of water supply line (raw/fresh water) with mechanical joint, of CI pipe line size 80mm including taking out the puncture/cracked existing pipe and transport to local workshop, cutting of damaged portion of pipe through welding/gas welding, making rough surfaces smooth and champhered by grinding and than connected through mechanical joint of adequate size with rubber rings both sides and fastener of required size and shape complete as per site requirement. NOTE :- Testing/commissioning the pipe line on full pressure after complete the job will be carried out and payment will made of this job if found sucess other wise the same will be redone again and no extra payment will be made on this account.
Description all as per Item No 68 above but size of pipe line 100mm
Description all as per Item No 68 above but size of pipe line 150mm
Description all as per Item No 68 above but size of pipe line 200mm
Material and labour for cleaning of CI/DI raw / fresh water pipe line upto 150mm dia by deploying skilled manpower for removing of mud/sludge by scrapping/pressurise back water including making arrangement such as portable pump set, portable welding set and any other equipment as per site requirement with the full satisfaction of Engr-in-Charge
Material and labour for overhauling the centrifugal pump set by dismantling the pump set opening, cleaning, greasing including replacement of spare parts and re-assembling after repairs including all required metalling, grinding, etc., transportation, reinstalling back to position and testing complete for 7.5 to 25 HP Pump sets of various types as directed by the Engr-in-Charge. NOTE :- (i) Minor spares such as gland packing, gaskets, nuts, bolts, grease, various rings deemed to be included in the quoated rates. (ii) Major spares such as shafts, bearings, impellar, throught bush, coupling will be measured & paid seperately under respective items of Sch.
Supply only spares for following pump sets to be incorporated in item no 73, here in before. MAKE :- Kirloskar Pumps or any other pumps.
Supply only shaft sleeve
Supply only Shaft sleeve nuts ( set of 4)
Supply only Bearing cartridge DE/NDE
Supply only Bearing cover DE/NDE (set of 2)Split gland coupling
Supply only Bearing cap (set of 2)Wear Ring
Supply only Bearing lock nut
Supply only Throat bush (set of 2)
Supply only Gland packing 10MMSQ
Supply only DSM 100/36 set of Gaskets
Supply only DSM 100/36 set of 'O' rings
Supply only bearing set for 7.5 to 25 HP pump set make Kirloskar as required at site
Dismantling after diconnecting of all electric connection of soft starter of any make and capacity upto 25 HP and sent to authorised/manufacturer workshop for servicing, repair & testing and replacement of all unserviceable parts whichever required to make it serviceable in all respect including programmeable card as per recommendation of manufacturer and will be brought back to pump house and refixing/reconnection of electric connection on its original position and testing and commissioning with full load complete all as specified and as directed by Engr-in-Charge
Material and labour for disconnecting the electrical and mechanical connection of burnt electrical motors from the site / location including transporting to and from to work shop. Rewinding of electrical motors by dismantling and removing the burnt out copper winding wire, cleaning the slots of stator completely and winding polyster based super enamelled copper wire of same gauge of original one with 'F' class of insulation including varnishing and heating the coil and remove air bubbles complete stator/rotor after rewinding reassembling all parts including reinstalling connection to original position and testing on full load all as directed by Engineer in charge for 12.5 HP to 25 HP three phase Centrifugal Pump.
Description all as per item No.87 but 7.5 to 10 HP three phase centrifugal pump
Supply and fix in repair water pump seal kits of pressure pump set 0.5 HP all as specifed and directed. MAKE :- Schneder/ Danfoss/ Kirloskar
Supply only gland packing 10mm size
Supply only gland packing 12mm size
Supply only SG grease gde - I
Cutting of existing cast iron pipe at site 100 mm bore for insertion of new branch line /fittings & mechanical joint etc complete all as specified and directed by Engr-in-Charge.
Cutting of existing cast iron pipe of 150 mm bore for insertion of new branch line /fittings & mechanical joint etc complete all as specified and directed by Engr-in-Charge.
Cutting of existing cast iron pipe of 200 mm bore for insertion of new branch line /fittings & mechanical joint etc complete all as specified and directed by Engr-in-Charge.
Cutting of existing GI/MS pipe of 150 mm bore, insertion of new branch line of any bore complete all as specified and as directed.
Material and labour of plates Fe 410 w Grade E 250 Quality A (plain or chequered), channels, square cut or notched (ordinary and counter sunk with rivedted, bolted or welded attachment using for valve pit cover complete all as specified and as directed by Engr-in-Charge.
Material and labour for mild steel framed work with ends of bars souldered, welded or reveted or forced into spikes, framed guard bars, ladders, framed balusters, walk ways, railings, gates, frame work of water tank, valvepit and similar work confirming to Fe.290.Gde-E-165 incl painting with one coat of red oxide primer and one coats of anticorrosive black bituminous paint incl dismantling mild steel work of any description not otherwise specially provided for all as specified and directed.
Supply only pure PTFE gland packing Rope suitable for valves/Pumps
Supply and fix rubber gasket /packing 4mm thick suitable for valve/pump/suction sweeper complete all as specified and as directed.
Supply only nylon rope of size 20 mm dia multi stranded super flexible type and all as per specified and directed by Engr-in-charge.
Supply and fix in repair 3 pole power contactor AC, 415 Volt, with required NO + NC & Coil voltage 380V to 415V, suitable for upto 30HP water pump. MAKE :- L&T or other equivalent.
Supply and fix in repair 3 pole power contactor AC, 415 Volt, with required NO + NC & Coil voltage 380V to 415V, suitable for upto 15 HP water pump. MAKE :- L&T or other equivalent.
Supply and fix in repair Thermal over load relay for 3 Phase AC Motor starter, suitable for 25 HP water pump, relay setting range 20.0 to 40.0 Amps MAKE :- L&T or other equivalent approval as per list of makes.
Supply and fix in repair Thermal over load relay for 3 Phase AC Motor starter, suitable upto 12.5 HP water pump, relay setting range 12.0 to 30.0 Amps MAKE :- L&T or other equivalent approval as per list of makes.
Supply and fix in repair Electronic Timer, 3 - 30 Sec 415V MAKE :- L&T, or as per existing
Supply and fix in repair single phase preventor, MAKE :- L&T, or as per existing
Supply and fix in repairs 15mm dia ball valves high pressure of PTMT with epoxy coated luminium rod & highdensity plastic ball screwed for iron pipe and fixed.
Description all as per item No.108 above but for 20mm dia
Description all as per item No.108 above but for 25mm dia
Material and labour for painting of old painted surfaces with one coat synthetic enamel paint by using brush to sluice valve and wheel of size 80 to 200 mm dia including cleaning with chemical agent and preparing surface duly scraping old paint complete all as specified and as directed.
Taking up or down CI/DI water tubing 100 to 150mm dia including removing of all necessory connections/fittings complete all as specified and as directed by Engineer in Charge.
Material and labour for DI pipes 150 mm dia with spigot and socket ends , Class K-9, in any length any type laid in trenches / laid in floors all as specified. Note:- Rubber Tighten jointing rings shall not be measured and paid seperately.
Description all as per item No.113 but 100 mm dia
Material and labour for CI pipes 100 mm dia with spigot and socket ends, in any length any type laid in trenches / laid in floors complete all as specified and as directed. NOTE :- Rubber Tighten jointing rings shall not be measured and paid seperately.
Description all as per item No.115 but 150 mm dia
Repair to existing CI sluice valve in position 150 mm dia, double flanged by replacement of unsearviciable components such as bonnet, gland packing ,seat , diskgasket nut bolts and make good the disturb portion of pipe line up to the entire satisfaction of Engr in Charge. (Contractor should have to arrange necessary T & P and skilled labour for speedy restore of water supply)
Description all as per item No.117 but 100 mm dia
Description all as per item No.117 but 80 mm dia
Taking down unserviceable CI/DI/ fitting of any discription and Supply and fix cast iron fitting (any type radius and angle) taper any type (Straight) bend increasing decreasing or double socket etc Tee pieces, single branch ‘Y’ junction double branch, coller, capacity and plugs for up to 100 mm bore CI pipe conforming to IS-1538- 1976 complete all as specified and as directed.
Description all as per item No.120 above but size 100 mm to 200 MM bore
Supply and fixing mechanical joint for 200mm dia pipe made out of MS sheet fabricated as per existing site requirement including long MS nuts bolts rubber gasket cutting of pipe of any size GI/CI/MS/AC pipe all as directed by Engr-in-charge. NOTE :- Excavation and returning filling & removal etc included in quoted rate
Description all as per item No.122 but 150 mm dia
Description all as per item No.122 but 100 mm dia
Description all as per item No.122 but 80 mm dia
Material and labour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 1000 litre all as specified complete all as specified and as directed.
Material and labour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position size 500 litre all as specified complete all as specified and directed.
Supply and fix 6 sqmm 3 core flat/round flexible copper cable with flexible conduit . MAKE :- Polycab or equivallent
Supply and fix 10 Sqmm 3 core flat/round copper cable with flexible conduit . MAKE :- Polycab or equivallent
Supply and fix in repair of electric water level indicator including buzzer 5 level complete with sensor including sensor cable upto 50 mtr distance, wiring in PVC conduit/casing and capping etc for OH tanks and UG/Semi UG water reservoir all accessories and dismentling taking down unsv one complete all as specified and as directed.
Material and labour for cleaning of RCC OH reservior 100000 gallon capacity removing all deposite materials like sand, mud, etc, washing of side walls, scraping with iron brush to remove all type of scales, filling up cavaties by cement motar 1:1, washing of inner dome walls with bleaching powder before painting with lime, 2 coats complete and write the date of cleaning with suitable letter size with black paint complete all as specified and as directed by Engr-in-Charge
Description all as per ser no 131 above but size 50000 gallon capacity
Description all as per ser no 132 above but size 20000 gallon capacity
Material and labour for cleaning of RCC semi UG clear water sump 50,000 gallon capacity removing all deposite materials like sand, mud, etc by pumping out or by manuually complete, washing of side walls, scraping with iron brush to remove all type of scales, filling up cavaties by cement motar 1:1, washing of inner dome walls with bleaching powder before painting with lime, 2 coats complete and write the date of cleaning with suitable letter size with black paint all as speciied and directed by Engr-in-Charge
Description all as per ser no 134 above but size 35,000 gallon capacity
Description all as per ser no 134 above but size 25,000 gallon capacity
Drilling and tapping cast iron water mains (in position) for branch connections of the internal dia 15 mm including straight plain brass ferrules (or connecting screws) screwed both ends and fixed in water mains of size 15 mm bore complete all as specified and directed by Engr in charge.
Supply only PPM testing kit for portable/ drinking water measuring range 0.2 PPM to 5 PPM all as specified and directed.
Supply and fix shock treatment chart on laminated sheet with Aluminium chanel border of size 3x2 feet size complete with standard procedures complete all as specified and as directed by Engr in charge.
Supply only first aid box with all standard medicines complete all as specified and as directed by Engr-in- charge.
Supply and fix in repair M S Pipe 150 mm dia conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 of following sizes laid in trenches/ floor including bend, elbow, and Tee flanges cutting welding and necessary nut nolts required for fixing the pipe in location including taking down complete all as specified and as directed.
Material and labour for cleaning of MES water supply installations campus by surface dressing to remove small unequalities n.exc 15 cm deep ( including removing vegetation / shrubs / creepers / under-growth ), cleaning of drains & carrying away the rubbish to a distance n.exc 50 mtr complete at an interval of every 30 days for various installations at dunkirk line.
Material and labour painting of pump, motor complete set including base plate, of capacity up to 25 HP motors with two coat of synthetic enamel paint after preparing surfaces all as directed by Engineer-in-Charge.
Supply and fix in replacement of fully automatic star delta strater in sheet -steel encloser type MN with single phase protection suitable for motor rating 5.5 KW 3 phase 415 Volt 50 Hz relay range 45-75 Amps complete all as specified and as directed. MAKE : - L&T Cat part No. SS94022 or equivalent
Supply and fix in replacement of fully automatic star delta starter in sheet -steel encloser type MN with single phase protection suitable for motor rating 7.5 KW 3 phase 415 Volt 50 Hz relay range 20-33 Amps complete all as specified and as directed. MAKE :- L&T Cat part No. SS94366 or equivalent
Supply and fix in replacement of fully automatic star delta strater in sheet -steel encloser type MN with single phase protection suitable for motor rating 18.5 KW 3 phase 415 Volt 50 Hz relay range 14-23 Amps complete all as specified and as directed. MAKE :- L&T Cat part No. SS94364 or equivalent
Supply and Fixing in replacement Water pressure gauge of capacity 5 Kg/mm2 gauge 8 " or 6" (size of dial) complete all as specified and as directed. MAKE :- Guru or equivelent ISI Make
Supply and fix in repair NRV of 80 mm dia size, Class PN 1.6, hydrodynamically guided, closing non return valve with gray Cast iron body, synthetic rubber coated reinforced ball, flanged type including 6mm thick rubber gasket, MS nuts, bolts and washers and dismantling the unserviceable NRV complete all as specified and as directed.
Description all as per item No. 148 above but 100 mm dia
Description all as per item No. 148 above but 150 mm dia
supply and fix cast iron foot ball valve normax, 200 mm dia, ISI marked both end flanged with nut bolt washers and rubber gasket confirming IS 4038, installation, testing of following sizes complete all as specified and as directed.
Description all as per item No.151above but 150 mm dia.
Description all as per item No.151 above but 100 mm dia
Description all as per item No.151 above but 80 mm dia
Supply, filling (at contractor source) and distribution of water supply through water bowser of capacity 12000 Ltr having pumping arrangment with pipe miniumn 15 mtr supply to the PVC tank directly through pipe on the roof upto height of 10 mtr complete including necessary arrangement.(Note: Demand of water bowser will be given to contractor at any time between 0800 to 2200 Hrs and has to be supplied within 03 hrs after notification, failing to which Rs 300/- per hours per demand will be recoverd. amount of pumping arrangement, petrol and pipe etc are included in the quoted rate. No extra payment will be given.)
Material and labour for Chemical testing of water sample at month interval at PMC or at any govt recognised water testing lab for the following parameters: Turbidity, pH, Total Hardness, Alkalinity, Chloride, Nitrate, TDS, Iron, Flourides, calcium, Magnesium, Aluminium, Sulphide, Lead, Arsenic, Manganese, Copper, Mercury, residual chlorine complete all as specified and as directed. NOTE :- (i) Sample of water to be collected from pump house Located at Dunkirk Lines in sterilised bottle provided by the lab (ii) Sample of water to be deposited to lab and report to be collected duly signed by authorised person of Lab, (iii) Cost of transportation of water sample and collection of report shall be inclusive of quoted rate, (iv) Cost of Testing as specified shall be paid to Lab directly by the Contractor and the cost shall be inclusive of quoted rate, (v) Test shall be carried out in scheduled time, otherwise recovery shall be effected thrice the quoted rate, (vi) Complete parameter testing shall be considered as one job)
Material and labour for LED indication Lamp as per existing size( R-Y-B)
Material and labour for starter push button as per existing size ( Red/green)
Supply & fix 4mm dia hot dipped galvanized chain link fencing with zinc coating, including line wires, any type of standards, rails, straining bolts, etc. including provission of binding wire incl dismentling taking down unserviceable one (2.8 Kg per sqm with 2"x2" mess of 3 mm wire)
Material and labour for mild steel work of angle fixed independently for fencing post and others confirming to Gde Fe 410-A incl cutting to dead end length where required, notching, drilling, fitting and welding or connecting with bolts and nuts incl dismentling taking down unsv one complete all as specified and as directed.
Material and labour for TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns hooking ends or as in horizontal bar for fixing in fencing and binding with and including mild steel wire (anealed) not less than 0.9mm dia or securingwith clips complete for support of chain link fencing incl dismentling taking down unsv one all as specified and directed.
Supply and fix glow sign boards of size 12' x 3'x1' made out of acrylic sheet of 3 mm thick with letters as directed at various pump house holding on 3.5 mtr height stainless steel pipe 32mm, height 3 Mtr, providing lighting/illumination with four tube light set and wiring upto connected point complete as per sample all as specified and as directed by Engr-in-Charge. NOTE :- Sample of glow sign board to be got approved by Engr-in-charge/GE before placing the order.
Fabrication, supply and Installation of glow sign boards of size not less than 6mtr x 1 mtr x 0.4 mtr made of ACP Panel sheet of 3mm thick with blue background over 40' x 40' square tubes with verge letters made of acryclic sheet white in colour and having LED strip only on letters and MES Logo placed on angle iron frame duly welded of size 50X50X5.00 mm thick of height not less than 2 mtr including connecting service cable weather proof 4.00 sq.mm 2 core from switch board upto 20 mtr including taking out perished sign boards of any type complete as per sample all as specified and asdirected by Engr-in-Charge. NOTE :- Sample of glow sign board to be got approved by Engr-in-charge/GE before placing the order.
SKS Electricals
M/S SVOJAS ELECTROMECH ENTERPRISES
ONKAR ELECTRIC AND GENERAL STORE
Om Construction
JP ENTERPRISES
Suraj Sukhdev More
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .