WBPWD/AE/DESD/eNIQ-19/ 2024-25

Amount

S&F 415V, 63Amp TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (L&T / Havells/ Siemens)

S&F 6way double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (L&T / Havells/ Crabtree).

S&F double-door SPN MCB Distribution Board of following with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.. (L&T / Havells/ Crabtree/Siemens) a) 2+12 Way (for Incoming)

S&F 240/415 V MCB Isolator on din rail of existing DBs and necessary connection of following ratings: a) 4Pole 63 Amp . (L&T / Havells/ Crabtree)

b) 2Pole 40 Amp . (L&T / Havells/ Crabtree)

S&F 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection: i) 6-32A SPMCB

Cutting Channel of size (40 mm x 40 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles

S&D 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required as follows: a) 3 x 22/0.3 (1.5 sqmm)

b) 2x84/0.3 (6 sqmm) + 1x56/0.3 (4 sqmm) as ECC

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required a) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

b) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes of following sizes: a) 6 Sq. mm.

b) 4 sqmm

Supply of 1.1KV grade 4Cx25 sqmm XLPE armoured Aluminium cable.( KEI/ POLYCAB/HAVELLS)

Laying of 4 core 25 sqmm cable on wall/surface incl. S&F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting

S&F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 Core 25 sqmm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials : 4 Core 25 sqmm

S&F 240 V, 20A, plug socket with separate 20A Piano key type switch (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S&F 150x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/ perspex cover and making necessary connections as required

Excavation of soil for installation of Earth Electrode and filling & ramming.

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S& F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: i) By TATA-Medium GI pipe

Connecting the equipments to earth busbar including S&F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages (i) No. 4 SWG

Add GST @18% on Total from item no 1 to 18.

Add LWC @1% on Total from item no 1 to19 .

ADHISHARM INDUSTRIALS (BID ID -6074714)

SASTIK ENTERPRISE (BID ID -6078104)