REPAIR TO CGI ROOF SHEET, AC SHEET, FALSE CEILING, SUNKEN FLOOR TREATMENT, FLOORING AND OTHER MISC WORK, INCLUDING ROOF TREATMENT TO CERTAIN BUILDING OF A2 AND D AREA UNDER GE (W) MATHURA

Amount

Dismantling of AC (corrugated or semi corrugated etc) sheets in roof covering complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of red colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel ridges suitable for corrugated steel sheet 0.5mm thick of red colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts and washer in roofs, walls etc complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated sheets fixed with L-type or J-type or cranked hook bolts and washer in roofs, walls etc but except sheet complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets and frame complete all as specified and directed.

M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section ( not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm including providing and fixing designer decorative Gypsum board 4mm thick complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' old size brick straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

All as per item No 9.00 (here-in-before) but except bricks.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM in (1:4) finished fair and even external surface complete all as specified and directed.

M&L for rendering 10mm thick in CM (1:6) on other than fair faces of brick or concrete surface complete all as specified and directed.

M&L for rendering 5mm thick in CM (1:4) on fair finished faces of ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a one coat of alkali resistance primer complete all as specified and directed.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a one coat of chalk whitening on walls complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed

Dismantling timber scantlings 40 sq. cm and over in section in framed work, in any position complete all as specified and directed.

S&F steel work in tubular trusses including columns, special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1998 grade St-240 complete all as specified and directed.

M&L for applying two coats of synthetic enameled paint over a coat of red oxide primer on new steel surfaces exc. 10 cm girth and width including preparation of new steel surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick exceeding 0.11 sqm but not exceeding 0.18 sqm (Square/rectangular) in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

All as per item No 22.00 (here-in-before) but over 10mm thick rendering in CM (1:3) as in skirting/dado.

M&L for joint free Non skid coloured ceramic tiles 7 to 8 mm thick exceeding 0.18 sqm but not exceeding 0.38 sqm (Square/rectangular) in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

All as per item No 24.00 (here-in-before) but over 10mm thick rendering in CM (1:3) as in skirting/dado.

M&L for glazed coloured ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) for skirting / dado finishes complete all as specified and as directed.

Demolition of cement concrete ( unreinforced ) in ground floors and pavings not exceeding 15 cm thick above or below ground level complete all as specified and as directed

M&L for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

Dismantling structural steel work of any description and in any position complete all as specified and directed.

S&F mild steel flat iron as in hold fasts, wind ties etc and similar small work confirming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for pre-polished ultra designer chequered tiles (any colour) of size 30cm x 30cm x 25mm thick, with gray cement & pigment set, jointed and pointed in neat cement slurry in floors laid over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed.

M&L for providing 100mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in base of interlocking tiles/chequered tiles complete all as specified and directed.

Wornout existing treatment from sunken portion of WC /Bath/Kitchen/Passage area n exc 2.5 Sqm each including taking down floor tiles, plaster, lime/cement concrete, WC trap complete empty of existing sunk. (Taking down of plumbing & sanitary fixing & fixture shall be measured under relevant items).

M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in Sub base of ground floors or in sunken portion complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces finished fair and even in CM (1:4) mixed with liquid water proofing compound complete all as specified and directed. Note : Liquid WPC shall be measured and paid sapertaly.

Supply only Liquid water proofing compound of approved make complete all as specified and directed.

S&F Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including setting the trap and pan in concrete and including 10 ltr capacity PVC valveless syphonic action type low level flushing cistern and 32mm dia PVC flush pipe complete including jointing to socket of flushing rim, complete all as specified and directed.

S&F GI tubes medium grade, laid on sunken floor as on spout pipe 50mm bore complete all as specified and directed.

M&L for water proofing treatment with APP modified bituminous membrane 3mm thick consisting of the following for RCC roof :- (a) Cleaning palstered roof surfaces and applying a coat of oxidised bitumen based solvented primer @ 0.3Kg /Sqm of approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric water proofing membrance 3mm thick weight not less than 3.0 Kg/Sqm with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be sealed by flame complete all as specified and directed.

M&L for applying a coat of two component elastomeric acrylic polymer modified cementitious water proofing coating, having properties of 80 % elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing, etc., complete as per manufacturers specifications and sprinkle sand at 10-15 gram per sqft for better grip with plaster complete all as specified and directed.

VAISHAKHA CONSTRUCTION

B.M Enterprises

M/S SHRI RAM INFRASTRUCTURE

B R ENTERPRISES

RAJ CONSTRUCTIONS

SHYAMA CONSTRUCTION

M/s Hoti Lal Contractor

SHRI RADHAYSHYAM JHA

CHOPRA ENTERPRISES

M/S JAGVIR SINGH

BALAJI INDUSTRIAL CORPORATION