Loading…
Loading…
Tender Value
₹1.0 Cr
EMD Value
₹2.1 L
Closing Date
17 Aug 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
15 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB of Northern Railway Standard Tender Document- 2022, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
(a) The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of tender for composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges- substructure, superstructure etc.), tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of each component of tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Work experience certificate from private individual shall not be considered. However, in addition to work experience certificate issued by any Govt. Organization, work experience certificate issue by Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated /registered at least 5 years prior to the date of closing of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Substantially Completed Work means an ongoing work in which payment equal to or more than 90% of the present contract value (excluding the payment made for adjustment of Price variation (PVC), if any) has been made to the contractor in that ongoing contract and no proceedings of termination of contract on Contractor's default has been initiated. The credential certificate in this regard should have been issued not prior to 60 days of date of invitation of present tender.
Defination of Similar Work :- Any work of Provision of Signal motor or Point machine. The similar work should include wiring also if tendered work includes wiring. OR Any Signalling work which includes provision of Signal motor or Point machine. The similar work should include wiring also if tendered work includes wiring. Note 1: Tenderer may be required to submit the schedule of those works, Completion/ Performance Certificates of which have been submitted by him/her in support of 30 / 40 / 60 % (as the case may be) criterion of similar nature of work.
32 conditions · 15 needing a document upload
1. Tender fee (if asked) need to be deposited online on www.ireps.gov.in. 2. EMD need to be deposited online on www.ireps.gov.in. 3. For the tenders costing above 50 Lacs: Details of "total contractual payments" in the previous three financial years. 4. For the tender costing above 50 Lacs: Details of technical credentials have successfully completed or substantially completed similar nature work as mentioned in tender condition. Completion certificate issued by competent authority should mandatorily mention Name of work, name of agency, Contract agreement number, date of completion/date of completion of substantially completed work, Completed Cost/substantially completed cost of work, Nature of firm (Partnership/Proprietorship etc.) and details of its constituents, if any, PAN/GSTIN etc. so that evaluation may be done accordingly. 5. If Tenderer is sole proprietor: Notarized copy of Affidavit on Stamp paper of appropriate value declaring that his/her concern is a Proprietary concern. 6. If Tenderer is Partnership firm: Self attested copy of (i) Registered/Notarized partnership deed (ii) Original/Notarized power of attorney. 7. If Tenderer is JV/Limited Company: Copy of Memorandum and Articles of Association of the company. Power of Attorney (duly registered/notarized as per prevailing law) by the company authorizing the person to do/act on behalf of the company. 8. If Tenderer is Company: Copies of MOA (Memorandum of Association) & AOA (Articles of Association) of the company. Power of attorney duly registered/notarized by the company in favour of the individual signing the tender on behalf of the company. Resolution of Board of directors in regards of approving Power of attorney issued. 9. If Tenderer is Society: Attested copy of the certificate of registration. Deed of formation. Power of attorney in favor of the tender signatory.10. Copy of PAN number and TIN number.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit the copy of the registration certificate of firm, PAN, GSTIN etc.
S&T work in c/w (1) Repl. of steel girder with RCC slab of Bridge No.102 UP&DN, 111 UP&DN, 119 UP on JUC-ASR sec., B.no.180 on ASR-ATT & br. no.103 on VKA- DBNK section. (ii) Construction of LHS of internal size 5 m X 3.5 m LHS in lieu of LC C-7 at KM 4/13-14 on JUC-NRO section under ADEN-JUC over firozpur division. (iii) Construction of LHS of internal size 5.0 X 5.0m at manned L-xings No.A-5 on VKA- DBNK section by pushing method in the section under ADEN-I/ASR. (iv) Construction of RCC box (2 nos. twin boxes) bridge in lieu of steel trough bridge no.158 in PHR-LNK section.
433-Sig-T-36-26-27
433-Sig-T-36-26-27
Open
Works - General
6 Months
Firozpur, Punjab
₹0
₹2.1 L
17 Aug 2026
24 Jul 2026
3 Aug 2026
67 items across 3 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 78,69,119.1 | ||
| — | 10.00 | — | — | ||
| Supply of Electric point machine IRS type, Non-trailable type, 220 mm. throw and clamp point lock 60Kg, rated voltage 110V DC (Thick web switch point machine), internal locking with tools and complete accessories. The point machine shall be Rotary locking type and shall have a min. AC immunity level of 160 V (r.m.s), 50 Hz. It must contain ground connections including all type of insulation, crank handle, clamp lock etc. as per drawing no. RDSO/S-11000, RDSO/S-3395 & RDSO spec. no. IRS: S 24-2025 Rev. 3.0 or latest if any. (Inspection: RDSO for Point machine & Ground connections and accessories by Consignee) | — | — | — | 17,49,677 | |
| — | 10.00 | — | — | ||
| Supply of Motorized Locking arrangement 110 V AC/DC operated as per RDSO Spec RDSO/SPN/208/2012 Ver 2.0 with Amendment-1 or latest with four Limit Switches including Dual Limit switch for Boom Lock Proving/closing as per new Design of Make: Global. (Inspection: RDSO) | — | — | — | 4,74,950 | |
| — | 120.00 | — | — | ||
| Supply of 2V-200AH Maintenance free battery as per RDSO Spec: IRS- S-88/2004. Make- Exide or similar. (Inspection: RDSO) | — | — | — | 5,83,680 | |
| — | 10.00 | — | — | ||
| Supply of complete set of point rodding (Ground connection including clamp locking arrangement) for 220 mm stroke point machines for thick web switches conforming to RDSO specification IRS: S 24-2025 Rev. 3.0 or latest and as per drg. No. RDSO/S-11000 and RDSO/S-3395 or latest as applicable. (coal Bangal for smithy work, all type of nuts & bolts and Lugs as required also to be supplied with each set).(Inspection: Consignee) | — | — | — | 3,61,022 | |
| — | 100.00 | — | — | ||
| Supply of Insulation for 'L' type bracket for point fitting IRS type as per drg. No. SA- 8800-01(Adv.) or latest complete consisting of insulation rail joint splice plate - 01 No. to drg. no. S- 8804 Nylon Type-66 as per IRS-S-40/84 with latest amendment, Ferule - 02 Nos. to drg. no. S-8813 as per spcn. no. IRS:S-40/84 material nylon type-66, washer - 04 Nos. to RDSO drg. no. T-10371 ALT- 2 IRS-40/84 nylon type-66.(Inspected by Consignee) | — | — | — | 27,710 | |
| — | 100.00 | — | — | ||
| Supply of Insulation for 'P' bracket for point fitting IRS type complete consisting of Rail Joint splice Plate for 'P' bracket LH side - 01 No. as per RDSO Drg. no. S-3266 Nylon Type -66 as per IRSS-40/84 with latest amendment, Insulation rail joint splice Plate for 'P' bracket RH side - 01 No. as per RDSO Drg. no. S-3265 Nylon Type -66 as per IRS-S-40/84 with latest amendment, Bush for 'P' bracket -04 Nos. to Drg No. S-23199 as per spcn. IRS:s- 40/84 material Nylon Type, Insulating washer for insulated 'P' bracket -04 Nos. to RDSO Drg. no. S-8640 as per spcn. no. IRS-S-40/84 nylon type-66.(Inspected by Consignee) | — | — | — | 71,040 | |
| — | 200.00 | — | — | ||
| Supply of point's William stretcher bar insulation complete set as per per IRS: S-40/84 or latest and RDSO Drg. Nos. T-10367, T-10368 & T-10371 with latest amendments complete with nut bolts etc. (Inspection: Consignee) | — | — | — | 60,260 | |
| — | 200.00 | — | — | ||
| Supply of ARA terminal blocks 25 mm center small M-6 terminal made of PBT as per RDSO drg. no. SA-23741A(Alt 4) & spec. no. IRS-S-75/2006 or latest as applicable. (Inspection: RDSO) | — | — | — | 11,400 | |
| — | 4.00 | — | — | ||
| Supply of apparatus case Large with 'E' type lock and key ward no. 42 and handle as per RDSO Drg. no. RDSO/S-11500 or latest. (Inspection: Consignee) | — | — | — | 78,118.8 | |
| — | 8.00 | — | — | ||
| Supply of premium quality Mesh Office Revolving Chair with 1 Year Warranty, Height Adjustable, Heavy Duty PP Base, DIY Installation Make: Godrej Model No.9u02r Bravo Or Similar of reputed brand. Inspection: Consignee | — | — | — | 61,448 | |
| — | 4.00 | — | — | ||
| Supply of Floor mount Solid Engineered Wood Alston 2 Door Large File Cabinet with Lock | Multipurpose File Organizer Unit | Furniture for Office Storage of size 45D x 90W x 180H Centimeters. Durable, Lockable, Multipurpose, Space Saving, Sturdy. (Balliness Pine & Cloud Ash Finish or as desired by Engineer in-charge of work) Inspection: Consignee. | — | — | — | 82,880 | |
| — | 45.00 | — | — | ||
| Supply of Light weight Manual Operated portable Drilling Machine, 9/32 Inch or 7.14 mm size for drilling precise holes in rails or other. (Inspection: Consignee) | — | — | — | 3,48,331.5 | |
| — | 6.00 | — | — | ||
| Supply of signal group 2-aspect of Siemens make, type A-Rt-RG-A066 suitable for LED signal or equivalent without base plate along with guide rail conforming to specification no. IRS: 23-88, S: 34- 68, S: 46 or latest as applicable. (Inspection: RDSO) | — | — | — | 4,60,825.2 | |
| — | 6.00 | — | — | ||
| Supply of signal group 3-aspect of Siemens make, type A-Rt-RG-A067 suitable for LED signal or equivalent without base plate along with guide rail conforming to specification no. IRS: 23-88, S: 34- 68, S: 46 or latest as applicable. (Inspection: RDSO) | — | — | — | 4,91,104.2 | |
| — | 6.00 | — | — | ||
| Supply of Route group as per Drg no. RSSK-31/0002 without base plate. Make: Siemens (Inspection: RDSO) | — | — | — | 4,02,427.2 | |
| — | 6.00 | — | — | ||
| Supply of Shunt signal group of Siemens make, type A-Rt-RG-A065 suitable for LED signal type or equivalent without base plate along with guide rail conforming to specification no. IRS: 23-88, S: 34- 68, S: 46 or latest as applicable. (Inspection: RDSO) | — | — | — | 4,62,625.2 | |
| — | 40.00 | — | — | ||
| Supply of 02 nos. electrical lifting barrier GI booms of 9.76 meters each as per DRG. RDSO/S-11600 or latest. The material will be as per RDSO Specn. No. RDSO/SPN /208/2012/Ver.2.0 and Amendment 1 or latest. (Inspection: RDSO) | — | — | — | 11,66,620 | |
| — | 40.00 | — | — | ||
| Supply of 150Ah 12V Tall Tubular Inverter Battery | Ideal for Railway installations| Long Backup & Low Maintenance | Leak Resistant | 36 Months Warranty. Model: Exide XP 1500 or better. (Inspection: RITES) | — | — | — | 7,20,000 | |
| — | 30.00 | — | — | ||
| Supply of Heavy Duty Inverter ARC Welding Machine (IGBT) 250A with Hot Start, Anti- Stick Functions, Arc Force Control - 2 Year Warranty portable welding machine. Brand: iBELL M250- 104 or better make. (Inspection: Consignee) | — | — | — | 2,55,000 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
FinalGCC-2022-uptoACS6.pdf
ATTACHMENT
IRGCC2022ACS7.pdf
ATTACHMENT
IRGCC2022ACS8.pdf
ATTACHMENT
IRGCC2022ACS9.pdf
ATTACHMENT
IRGCC2022ACS10.pdf
ATTACHMENT
IRGCC2022ACS11.pdf
ATTACHMENT
StandardTenderDocument2022.pdf
ATTACHMENT
correctionslip1toSTD2022.pdf
ATTACHMENT
Specialconditionsofwork.pdf
ATTACHMENT
JPOforProtectionofcablesduringexecuitionofvariousworks_1.pdf JPO for protection of ST cables
ATTACHMENT
JPOforProtectionofcablesduringexecuitionofvariousworks_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .