Urgent SITC of Glow Signage

Amount

Supply & Delivery of LED Tube illuminated sign board fabricated by 18''(L)x4'(H)x10"(W) ACP box supported with 50 x 50 x 6 mm M.S. Angle structure all around with 40mm x40mmx 1.62 mm Al. edge angle for front portion only.The back side of the cover will be fabricated with hinges and arrangement in such a way so that it can be opened for maintenance purpose, including mechanical locking arrangement .The 3 mm ACP facial (Blue colour) should be provided with laser cutting of 6 mm laser cut Acrylic letters out of which 5 mm rising and back portion of the ACP board should be pasted with 2mm thick Clear Acrylic Sheet of same size as ACP facial as per the direction of EIC.The sign board should be illuminated by suffcient qnty 18W LED Tube lamps (Type- MAS LED Tube lamp 18 W 2100 lm) with Tube fittings (Phillips make) to be fixed by hooking arrangement with iron stucture fabricated for fixing purpose. Distribution wiring for power supply to LED fittings to be done by PVC rigid conduit, necessary clamps, cable tie etc. Back side of the of the board should be covered with 20 SWG G.I. sheet to protect rain water. The matter to be displayed will be finalised by authority and to be given later.This fabricated display structure is to be fixed on the top of prefabricated iron structure as per direction of EIC. ( Approved Matter of the Sign board will be provided at the time work execution )

Supply & Installation of 4 mm thick polyvenile coated Aluminium Composite Panel board ( Aludecor / Alstone / Pratap Bond) of blue colour as the base for fixing raised letter duly fixed on the MS structure as per direction of EIC. The riser structre should be covered with ACP sheet incl. side portion on the board.

M.S. works in brackets made from flats, angles, tees etc. to sizes specialy bent, twisted, forged; making holes drilled and fitted to rafter of trusses with necessary bolts, nuts, washer or screws etc. (length of straight not less than 230 mm) for extra support of Glow Sign by 50mmx50mmx5mm and the above supports should be painted with synthetic enamel paint over one coat of primer as per directiuon of EIC.

Scaffolding arrangement for working at height on entrance of the building by bamboo, ropes and wooden planks etc. and shifting of scaffolding materials after completion of work.

Transportation cost for taken away the glow sign board from Co’s workshop site to work site including loading, un-loading.

Wiring by 3x 1.5 sqmm single core PVC insulated copper wire through polythene pipe from loop box to fitting as per GS. [Make- Finolex/Havells/Polycab]

Supply & Delivery of 1.1 kv grade 2Cx6 sqmm XLPE-armoured AL. cable, as directed by EIC. [Make - Gloster/Havells/RR Kabel]

Laying of above cable, in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed, as per GS.

The rates should be quoted inclusive of all taxes and duties .

RAKTIM MUKHERJEE (BID ID -6348688)

SAUMIK GHOSH (BID ID -6348658)