Civil works for renovation of canteen building at ground floor and first floor including development of surrounding area inside Factory Lucknow

Name of the Individual / Firm / Company: * Mandatory

Type of ownership Pvt. Ltd./ Proprietorship/Partnership/ Public limited/ Govt. Agencies/ Trust

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

Contact details

Intending parties having credentials as mentioned below may participate in e-tendering. The pre-qualification requirements for the works are as under :-

List of similar works executed in the past 7 years with value, schedule period of completion reasons for delay in completion if any and salient features of works, with documentary evidence of satisfactory completion.

PAN No.:

Constitution and legal status i.e. Proof of proprietary/Partnership firm or company & authorised person for receiving or signing the documents to be submitted.

Goods and Service Tax ID No.

SAC for the said work shall be 995419

Bank account details such as account no., name of account holder, name and address of the bank, IFSC code duly certified by the bank along with cancelled cheque as a document of proof shall be attached.

Registered Contractor

Average annual financial turn over during the last 3 years, ending 31st March 2022 of the previous financial year [ should not be less than 30% of Amount put to tender]

EMD of Rs.151240.00

Latest Solvency Certificate issued from Nationalized/ scheduled Bank issued and NOT before 12 months from the last date of Tender submission

Experience of having successfully completed similar works during last 7 years ending last day of previous month. [Latest work experience certificate may be uploaded]

(i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost.

(ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost.

(iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

Details of person holding the power of Attorney (If different from contact person)

DECLARATION I

DECLARATION II

DECLARATION III

Description of Items

Removing dry or oil bound distemper, water proofing cement paint, synthetic enamel or of any painted surface and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches, scaffolding, work to any height, safety measures etc. all complete as per specification & as required and directed by Engineer in charge.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead and depositing to Civil Factory store : Of area 3 sq. metres and below including cost of all materials, labours, scaffoldings, T & P, wastages, cutting as per requriement etc. complete at all height as per specification, drawing and as directed by E.I.C.

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : Of area beyond 3 sq. metres including cost of all materials, labours, scaffoldings, T & P, wastages, cutting as per requriement etc. complete at all height as per specification, drawing and as directed by E.I.C.

Dismantling old plaster or skirting of any description at any height raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of all labours, materials, scaffolding and curing and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Dismantling tile work in floors and roofs of any description laid in cement mortar including stacking material within 50 metres lead :For thickness of tiles upto 25 mm including collection of servicable material and removal/disposal of dismantled rubbish and unserviceable material with in 50 mtrs lead wherever as directed by E.I.C including cost of all labours, scaffolding, T & P etc. all complete at all height as per specification and as directed by Engineer in charge.

Providing and laying full body vitrified tiles of all colours and shades in floor of minimum thickness 15mm with water absorption less than 0.06% and conforming to IS:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30 kg / sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily. Size of tile 600x 1200 /800x2400mm or as approved by EIC, including cost of all labours, scaffolding, T & P etc. all complete at all height as per specification and as directed by Engineer in charge.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.:Double charge vitrified tile polished finish of size of Tile 600 x 1200 mm including cost of all labours, scaffolding, T & P etc. all complete at all height as per specification and as directed by Engineer in charge.

Dismantling old plaster or skirting of any description at any height raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead including cost of all labours, materials, scaffolding and curing and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Providing, rendering, dubbing out cement plastering 15 mm thick with cement mortar 1:6 (1 cement: 6 coarse sand) on walls/ceiling, of rough / fair faces of brick wall / concerete surface of any description including jambs, soffit and edges of plastering chamfering wherever required, finishing of surface even and smooth without using extra cement with all labour, material, scaffolding, curing, including hacking of concrete surfaces, T&P etc including cost of all labours, materials, scaffolding and curing and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Providing and applying 01mm thick wall care putty(birla , JK or as approved ) on wall and ceiling for making surface smooth & even including preparation of surface by sand paper, wire brushing, washing down, filling holes, removal of nails etc including scaffolding, wastages, cleaning the surface clean etc. including cost of all labours, materials, scaffolding and curing and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Providing & applying two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved make & shade such as Asian/Berger/ICI to walls of any description at any height / depth nd of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litreincluding preparation of surface by sand papering, filling holes, cracks with birla putty stopping ,removing oil/smudge marks spreading and removing coverings, to doors, windows, floors,fittings, etc. to protect from splashes, removing and replacing furniture's, moveable cupboards,chicks, blinds, etc. washing floors, cleaning glass,joinery, leaving the premises clean neat and tidy including disposing rubbish outside in dustbins including cost of all labours, materials, scaffolding and curing and T&P etc. all complete at all height as per specification, drawing and as directed by Engineer in charge.

Providing and fixing factory made uPVC glazed / wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, heavy duty rollers for sliding, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m). with Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by EIC.-Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body Using R3 series with frame (55mm & above) x (40mm & above) & sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m).

Providing and fixing ISI marked flush door shutters to door frame (MS/ Wooden) 30 mm thick phenol formaldehyde bonded, core of block board construction conforming to IS : 2202 (Part I) of make Gee doors/Kit ply/ Swastik or other approved make, non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges 125mm size with necessary screws all complete as per drawings & specification also provisions for door fittings, making holes/ cutting for fixing fittings, making good including labour, material, T&P, cartage, wastage etc all complete as per direction of EIC.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868)/ powder coating/ dyed transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm

Providing and fixing in position aluminium handles of size 125 mm , ISI marked, anodised (powder coating not less than grade AC 10 as per IS : 1868) transparent or dyed/ / powder coating to required colour or shade, with necessary screws etc. complete :

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete including , materials, labour, T&P etc, required for proper completion of the work etc all complete all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).

Providing and fixing aluminium hanging twin rubber floor door stopper, ISI marked, anodised/ (powder coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Providing and fixing aluminium tower bolts of size 250 X 10 mm long , ISI marked, anodised /(powder coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :

Hacking of Cement Concrete flooring including cleaning for surface etc. complete including , materials, labour, T&P etc, required for proper completion of the work etc all complete all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).

Providing and laying gang saw cut 18 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. including cutting, rubbing, curing, moulding and polishing of edges to give high gloss finish, chamfering etc. complete at all levels; Area of slab over 0.50 sqm, joints chamfered in turning point and pointing the joints with white cement (1:2) using marble dust or suitable filler with admixture of pigment to match with shade of granite etc. including cost of all materials, labours, scaffoldings, T & P, wastages, circular/ oval cutting/ general cutting as per requriement etc. complete at all height as per specification, drawing and as directed by E.I.C.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved at directed place including, loading, unloading, transportation all complete as per direction of EIC.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.0 mm avg thickness (weight not less than 12.50 kg / sqm) including cutting straight or curved as per site requirement, rounding off edges jointing with steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading in doors/ wndows/ vetilator/ partition etc.as required properly fixedwith beading/ EPDM gasket as per site requirement including cutting straight or curved as per site requirement, rounding off edges jointing with steel screws all complete as per architectural drawings and the directions of Engineer-in-charge.

Providing and fixing white vitreous china flat back half stall urinal of Parryware / Hindware/ Cera or approved make, size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :

Providing and fixing wash basin with MS brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm etc, shape (oval /bowl shape) of ' Parryware / Hindware/ Cera / Somany make or approved equivalent make fixed in MS brackets, including the cost of all approved materials,labour, wastages,testing,T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge. all complete and as per specification and as directed by EIC

Providing and fixing Stainless Steel A ISI 304 (18 / 8) kitchen sink without drain board of size 610 X 510 mm bowel depth 200mm as per IS:13983 with C.I./MS brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required: etc of 'Imagine/ kitchen queen/ Nirali/ Jindal/ Hindware make as approved equivalent make fixed in MS brackets, including the cost of all approved materials,labour, wastages,testing,T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge. all complete and as per specification and as directed by EIC

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm , P or S trap, 10 litre low level white P.V.C. flushing cistern, PVC connection, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings, brackets and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests etc of ' Parryware / Hindware/ Cera / Somany make or as approved make including the cost of all approved materials,labour, wastages,testing,T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge. all complete and as per specification and as directed by EIC

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, make Supreme/ Astral/ Finolex as approved by EIC including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including Concealed work, including cutting chases and making good the walls, painting etc testing of joints complete as per direction of Engineer in Charge.

20 mm nominal dia Pipes

25 mm nominal dia Pipes

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms; 15 mm nominal bore of approved make such as Cera/ L&K/ ARK/ Plumber as approved by E.I.C., including the cost of all approved materials, fittings, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing 25 mm nominal bore ball valve (brass) of approved quality of make Zoloto/ Audco/ L& T or as approved, High or low pressure, with plastic floats etc including the cost of all approved materials, fittings, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing 150 mm dia C.P. brass shower rose with 15 or 20 mm inlet, make Hindware/ Jaquar/ Kohler or as approved by EIC : etc including the cost of all approved materials, fittings, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931 of approved make such as Cera/ L&K/ ARK/ Plumber as approved by E.I.C., including the cost of all approved materials, fittings, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing 15 mm dia normal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931, of approved make such as Cera/ L&K/ ARK/ Plumber or as approved by E.I.C., including the cost of all approved materials, fittings, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality including the cost of all approved materials, fittings, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing Circular type PTMT grating of approved quality and colour including the cost of all approved materials, fittings, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.

100 mm nominal dia

125 mm nominal dia with 25 mm waste hole

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of size 450x350mm / 350 x 250 or larger size of kajaria / johnson/ nitco/ orient-bell of approved make shades, pattern and print / design on walls, in all colours, shades of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Dark shade pigment using ordinary cement of of kajaria / johnson/ nitco/ orient-bell of approved make shades, pattern and print / design on walls, in all colours, shades of any size as approved by Engineer-in-Charge including pointing in white cement mixed with pigment of matching shade complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium for fixed portion (minimum thickness of powder coating 50 micron)

-do-- as above For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance of make TATA/ Bhusan/ Jindal as approved by EIC. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/frame work shall be paid separately).-0.56 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm.

Providing and laying Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in substructure /superstructure above plinth level up to floor V level, in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) or any description of similar works, including necessary cutting of bricks as required , wastages, straight or curved, work up to any height or depth, including , materials, labour, T&P etc, required for proper completion of the work etc all complete all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).

Providing and fixing tiled false ceiling of make- Armstrong /Knoff or as approved by EIC specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all Tsections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Providing & laying PCC 1:4:8 (1 cement : 4 manufactured sand : 8 graded stone aggregate 40 mm nominal size) in foundation, under floors or any other similar description of works eg. drains, pipe lines bedding layers, manholes, road, chambers, duct etc with mechanical mixing including form work, side shuttering, compaction, curing including , materials, labour, T&P etc, required for proper completion of the work etc all complete all as per specifications, drawings and as directed by Engineer-in-Charge (EIC).

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregat 20 mm nominal size of Bahratcoop/Dala/Jhansi) in floor, approach roads, description of works etc including mechanical / manual mixing , wastage, compaction, curing also making contraction joints/grooves, if required with all labour, material, T&P etc all complete as per direction of EIC

Providing, fabricating and Fixing steel reinforcement, conforming to IS-1786-1985, for any diameter of TISCON / SAIL/ RINL/Gallent advance of approved make by EIC for all type of R.C.C works, using deformed Thermo mechanically treated bars of Fe 500 D or more and conforming to relevant IS of any diameter for all type of R.C.C. works, straightening, cut to length, welding, bend to shape required including cranking bending spirally or hooping providing spacers/ chairs, and binding with mild steel wires (annealed) not less than 0.90 mm diameter so that placing and ramming of concrete will not displace it, including cost of all labours, materials, T & P etc. all complete at all height and location as per specification, drawing and as directed by Engineer in charge.

Providing and fixing looking mirror of superior glass (of approved quality) of make Saint Gobain/ Gulmohar or as approved by EIC and of required shape and size with plastic/ wooden moulded frame as approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm of Modi /Saint Gobain or as approved make with hard board backing fixed with WPC/PVC frame of rectangular shape, approved design fixed with necessary screws etc.including the cost of all approved materials, labour, wastages, T&P etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing 8 mm dia C.P. / S.S. Health faucet /Jet with flexible tube upto 1 to 1.25metre long with S.S. triangular plate to Eureopean type W.C. of suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete of standard make & size eg L&K, Hindware, Jaguar, essess, Prayag, Cera of approved make to be fitted to concealed water supply line including the cost of all approved materials,labour, wastages,testing, T&P at all heights etc., all complete as per specification and as directed by Engineer In Charge.

Providing and fixing in position 12 mm thick toughened glass of Modiguard/ Saint Gobain as approved by EIC, in door shutter of approved brand and manufacture, inculding all fitting for to fixing the door tightly, fixing arrangement and making necessary holes etc. for fixing required door fittings, locking arrangement, door stopper etc. and hardware fittings, required shall be of Modiguard / Saint Gobain or as approved make etc all complete and as directed by EIC.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of Kajaria /Jjohnson/ Nitco/ Orient-bell as approved by EIC of required shades, pattern and print / design on walls, in all colours, shades of any size as approved by Engineer-in-Charge,of 1st quality conforming to IS : 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge:60 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.

Supplying and fixing not less than 50 micron thick designer film on glass door/ window/ galzed partition of Garware or equivalent make and shade as approved , reflective type, including cleaning of glass with liquid soap before fixing of film including removal of damaged/ unserviceable sun film from glass, cleaning of glass, wherever required etc. complete including cost of all labour, materials, wastage, T&P, etc. all complete work at all heights etc as per specification, drawing and as directed by Engineer in charge.

Providing and fixing Vertical venetian blinds of 100mm width of approved colour & texture/pattern (approved designs printed / plain) including its hardware mechanism of repuated manufacturer such as Vista, Aerolux, MAC or as approved all complete with material , fixing, fixing accessories, making holes in concrete / brick wall, making good, wastage etc. as per specification and direction of EIC. (Note: Samples must be got approved by EIC before execution of work.)

Providing and fixing stainless steel ( Grade 304) of make Jindal/ TATA as approved railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered including cost of all labour, materials, wastage, T&P, etc. all complete work at all heights etc as per specification, drawing and as directed by Engineer in charge.

Providing and fixing unplasticised Rigid 110 mm dia PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

110 mm diameter

75mm diameter

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush, 15 mm nominal bore with 45 cm length of approved quality and colour. etc all complete and as directed by EIC

Supplying and fixing of Toughened glass (frosted) urinal partitions of size 900mmX400 mm (approx) , 10 to 12 mm thick of approved make Hindware/ Jaquar/ cera as approved by EIC, rounding of the edges, SS brackets complete including cost of all labour , material, T&P, wastges , ss clamps, patch fittings, SS screws, fasteners etc. all complete as per specification and as directed by Engineer In Charge.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge.

Providing and Fixing factory made uPVC Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides.-Using R3 series with frame (55 mm & above) x (50mm & above) & sash (55 mm & above) x (85mm & above) (Height upto 2.5 metre).

Providing and fixing of Pre-coated colour or mill finish Aluminium Roofing Accessories in 0.71 mm thickness, Alloy 31500 (IS designation) [Aluminium Alloy (AA) 3004 (ISO designation)] For color, coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of size 6 x 50mm with 3mm thick EPDM seal and SS plain washer complete : Precoated/ mill finish aluminium Ridges plain (500- 600mm).

Providing, Fabricating & fixing of Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position, MS Roof Truss (framed), trusses, purlins, crain, gantries, rails & fastnings and heavy bracket framing (beam, Tee, angle, channel, tubular , rectangular, square, flat, Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete etc all required sections including distance pieces, cleats, base plates, nut bolts, tie road, foundation bolt etc. at any height including all labour material, T & P, errection, scaffolding, wastage etc.all complete as per specification and direction of E.I.C.

Supplying and fixing of dolphy plastic Hand Dryers (SS body) of size approx 240x270x200mm or larger having drying time 10 sec, 1000-1100ml capacity, RPM 12000, air speed 30 m/sec blowing volume 270 cum/hr. and power 2500 watt or as per manufacturer specification of approved make eg Kent, Hindware, Jaguar, Cera, euronics, darphy as approved make complete including cost of all labour , material, T&P, wastges , ss clamps, screws, fasteners etc. all complete as per specification and as directed by Engineer In Charge.

Above