Const. of Devika Theme River Front Park at Udhampur (Exhibition halls, Security Guard Help Desk Toilets electric room, boundary wall, retaining wall,mural wall and gate incl. Parking complete).

Amount

Earth work in excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth , 1.5 mtr in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 mtr and lift upto 1.50 mtr, disposed earth to be levelled & neatly dressed (without breaking public/ private property) as per direction of Engineer In charge at site.

Earthwork in all kinds of soil excavation by manual means in trenches for foundations, drains, pipes, cable etc. (not exceeding 1.5 in width) and for shafts, wells, cesspits and the like not exceeding 10 Sqm on plan, depth upto 1.5 Mtr including disposal of excavated earth upto 1 Mtr from cutting edge, disposed earth is to be levelled and neatly dressed.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) 40mm nominal size crushed.

Providing and laying in position cement concrete of 1:3:6 grade (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) excluding the cost of centering and shuttering. All work upto plinth level.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excluding cost of centring, shuttering, finishing and reinforcement. 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size).

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars.

Centering and shuttering including strutting, propping etc. and removal of form work for :-

Foundations, footings, bases of columns.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, pillars, piers, abutments, posts and struts.

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls upto 20cm wide.

Retaining walls, return walls, wall (any thickness) including attached pilasters, buttresses, plinth and string courses fillets etc.

Brick work with common burnt clay F.P.S (non- modular) bricks of class designation 75 in foundation and plinths in cement mortar 1:6 (1cement : 6 coarse sand). incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete

Extra for brick works in super structure above plinth level up to floor five level. incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete

6 mm cement plaster to ceiling of 1:3 (1 cement : 3 fine sand) incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 fine sand)

12 mm cement plaster of mix 1:6 (1 cement : 6 coarse sand).

Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ; Size of tile 120x120 cm incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

Providing & Laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) Crushed

Providing & fixing UPVC window, ventilator and partition wall for fix portion (14 guage) including glass 5.5 mm thick. The shutter frame filled with UPVC multi-chambered single panels of size not less than 620 mm, having over- all thickness of 20 mm and 1 mm +/- 0.1 mm wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanized MS rod and fastened with nuts and washers, complete as per manufactures, specification and direction of engineer- in- charge.

Providing & laying interlocking cement conc. tiles IS marked (M40), 80 mm thick of approved quality over 50 mm thick base of coarse sand in proper slope and grade as per instruction of engineer in charge

Providing and fixing wood work in frames of doors, windows, clerestory windows & others frames, wrought framed & fixed in position with holdfast lugs or with dash fasteners of required dia & length (hold fast lugs or with dash fasteners shall be paid for separately) salwood.

Providing and fixing of block door shutters in pine wood filling and finished with 1mm thick laminated on both sides. Door held with 4 No. hinges with necessary screws as per directions of Engineer-in-charge with deodar wood beading of 100mm x 37mm section.

Dry Random Rubble masonry with hard stone in foundation & plinth using Nallah stone with bond stone incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface water thinable cement primer.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Providing and laying water proofing treatment (Make Armocreate of SWC Chryso France) to vertical and horizontal surface of depressed portions of W.C., kitchen and the consisting of (i) Ist course of applying cement slurry @ 4.4 kg /sqm mixed with water proofing compound conforming to IS : 2645 in recommended proportions including rounding of junctions of vertical and horizontal surface. (ii) IInd course of 20mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportions including rounding of junctions of vertical and horizontal surface. (iii) III course of applying blown or / residual bitumen applied hot at 1.7 kg per sqm of area. (iv) Ivth course of 400 micron thick PVC sheet (Overlaps at joints of PVC sheet should be 100mm wide and pasted to each other with bitumen @ 1.7 kg/sqm.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with C.I/ M.S brackets standard size of G.I flush pipe and C.P brass spreaders with brass unions and G.I clamps complete and making good the walls and floors wherever required one urinal basins with 5.0 litre P.V.C white automatic flushing cistern of approved quality.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, C.P brass hinges and rubber buffers, 10 ltr low level vitreous china flushing cistern with fittings, C.I/ M.S brackets 40 mm diameter flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. W.C pan with ISI marked white solid plastic seat and lid with white vitreous china flushing cistern & C.P flush bend.

Providing & fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous china wash basin size 630 x 450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing & fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453 x 357mm (outer dimensions).

Providing & fixing 600 x 120 x 5 mm glass shelf with edges round of supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangements of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

providing & fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.

Providing and fixing Urinal partition/ division plate

Providing & placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Electroplaste Star, Lotous or equivalent having valid ISI License). (1000 ltr capacity)

Construction brick measonery man hole in cement motor 1:4 (1 cement: 4 Coarse Sand) R.C.C top slab with 1:2:4 mix (1 cement: 2 Coarse Sand: 4 graded stone aggrigate 20 mm nominal size) foundation concrete aggrigate 40 mm Nominal Size, in side palstering 12mm thick with cement mortor 1:3 (1 cement:3 Coarse sand) finshed with floating coat near cement and making channels in cement concrete 1:2:4 (1 cement:2 Coarse snad:4 graded stone aggirgate 20mm nominal size) finished with floating coat of neat cement complete as per standard design. inside size 90cmx80cm and 45cm deep including cast iron cover with frame (light duty) 455x610mm internal dimensionals. total wt. of cover and frame to be not less than 38kg (wt. of cover 33kg and wt.of frame 15kg) with F.P.S bricks of class designation 75 (crush stone aggrigate)

Constructing brick masonry chamber for underground C.I inspection chamber and bend with 75 class designation bricks in cement mortar 1:5 (1 cement: 5 fine sand) CI cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) RCC top slab with 1:2:4 mix (1 cement: 2 coarse sand: 4 graded stone aggregate 40 mm nominal size), foundation concrete 1:5:10 (1 cement: 5 fine sand: 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc complete as per dtandard design inside dimensions 455x610 mm and 45 cm deep for single pipe line with FPS bricks with nallah stone aggregate.

Providing & fixing C.P. brass angle valve for basin mixer & geyser points of approved make conforming to IS: 8931. 15 mm nominal bore.

Providing & fixing C.P brass bib cock of approved quality confirming to IS 8931: 15 mm nominal bore. (Parry ware, Cera, etc).

Providing and fixing toilet paper holder. C.P brass.

Providing & fixing P.V.C waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipes 32 mm dia.

Providing and fixing PTMT waste coupling for wash basin and sink, of approved quality colour waste coupling 31 mm of 79 mm length and 62 mm breadth weighing not less than 45 gms.

Providing & fixing C.P. Stop Cock (Concealed) of standard design and of approved make conforming to IS : 8931 15 mm nominal bore

Providing and fixing 100mm sand cast iron grating for gully, floor or Nahani trap

Providing & fixing water jet nozzle/ health foucet with hose pipe european water closet complete in all reaspect of approved quality

Providing & fixing CP brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. 15 mm nominal bore of standard back type.

Cutting hole upto 30x30 cm in walls including making good the same with common burnt clay FPS (non modular) bricks.

Cutting hole upto 15x15 cm in RCC floors & roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 ( 1 cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size) including finishing complete so as to make it leak proof.

Providing & fixing soil, waste & vent pipes IS: 13592 & fittings (IS: 14735) suitable to rubber ring joints, which includes bends, rubber ring, jointing, junctions clean out plug, cowls, offsets, collar, MS holder bat clamps, access pieces, trap of self cleansing design etc. complete including jointing

75 mm dia PVC SWR socketed pipe with rubber ring joints as per IS: 13592 Type- B

110 mm dia PVC SWR socketed pipe with rubber ring joints as per IS: 13592 Type- B

Cutting chases in brick masonry walls for following diameter U-PVC pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone agg. 12.5 mm nominal size) including necessary plaster and pointing in cement mortar 1:4 (1 cement: 4 coarse sand) 160/110/90 mm diameter pipe

Providing and fixing Polyethelene-Aluminium Polythelene (PE-AL-PE) Composite presure pipes conforming to IS:15450 U.V stabilised with carbon black having thermal stability for hot and cold water supply , capable to with stand temperature upto 80 c including all special fittings of composite material (Engineering plastic blend and brase inserts wherever required) e.g Elbows, tees, reducers, couplers and connectors etc with clamps at one meter spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-charge.

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

Providing and fixing Polyethelene-Aluminium Polythelene (PE-AL-PE) Composite presure pipes conforming to IS:15450 U.V stabilised with carbon black having thermal stability for hot and cold water supply , capable to with stand temperature upto 80 c including all special fittings of composite material (Engineering plastic blend and brase inserts wherever required) e.g Elbows, tees, reducers, couplers and connectors etc with clamps at one meter spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-charge (concealed work including cutting chases and making good the wall etc).

2532 (32 mm OD) pipe

6350 (32 mm OD) pipe

Providing and fixing Polyethelene-Aluminium Polythelene (PE-AL-PE) Composite presure pipes conforming to IS:15450 U.V stabilised with carbon black having thermal stability for hot and cold water supply , capable to with stand temperature upto 80 c including all special fittings of composite material (Engineering plastic blend and brase inserts wherever required) e.g Elbows, tees, reducers, couplers and connectors etc with clamps at one meter spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the Engineer-in-charge (External work) 4050 (50 mm OD) pipe

providing & fixing brass float valve with ball of approved make for the following sizes for water supply to over head tank 50 mm diameter pipe

Providing & fixing gun metal gate valve with CI wheel of approved quality (screwed end)

25 mm nominal bore

32 mm nominal bore

Providing & fixing unplasticised connection pipe with brass union 45 cm length 15 mm nominal bore

Providing, laying & jointing of UPVC pipe type B with cement concrete 1:5:10 (1 cement: 5 carse sand: 10 graded stone agg. 40 mm nominal size) all- round PVC pipes including bed concrete as per standard design 160 mm diameter PVC pipe

Providing & fixing square mouth PVC gully trap complete with PVC grating, brick masonry chamber with water tight CI cover with frame of 300x300 mm size (inside) 110x110 mm size P type with common burnt clay FPS (non modular) bricks of class designation 7.5

Anil Kumar

M/s JINDAL BUILDERS

rakesh chander sharma govt contractor

TRIDEV HOT MIX PLANT

Vijay Kumar