REPAIR / MAINT TO HARDSTANDING, INSTALLATION PROTECTIVE FENCING, PARKING SHEDS, PATHWAYS, TRAVERSES, SWT AND OTHER CONNECTED MISC WORKS AT AF STN DIGARU.

Amount

Demolition of brick work/stone boulder masonary built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work or precast concrete article complete all as specified and directed.

M&L brick work with sub class 'B' bricks strait or curved on plan exc 6 M mean radius built in CM 1:4 complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (Below or above ground level) un-reinforced complete all as specified and directed.

M&L for Hardcore of broken stone boulder of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and as directed.

M&L for 100 MM thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in floors complete all as specified and as directed.

M&L for 100 MM thick PCC 1:2:4 type B-1 using 20 mm graded aggregate as in floors complete all as specified and as directed.

M/L for Screed bed or bedding layer of cement mortar 15 mm thick for laying floors finishes in cement mortar 1:6 complete all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness (except ceramic tiles) in floors, aprons etc laid bedded & pointed in any mortar complete all as specified and directed.

M/L for pre polished Chequered cement concrete tiles 30cmX30cmX25mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation complete all as specified and as directed.

M&L for Machine pressed precast conctete interlocking paver block any shape and size with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and as directed.

Supply only hard core, broken to gauge n. exc. 63mm

Taking down cement plaster on brick or stone wall etc including raking out joints hacking for keys scrubbing down with water etc.

M&L 15 mm rendering in CM 1:4 on on other than fair faces of brickwork or concrete surafaces.

M&L for preparation of newly plastered surface and applying two coat of cement base paint complete all as specified and as directed.

M&L for preparation of newly plastered wall surfaces and applying three coat of white wash complete all as specified and as directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

S/F MS steel post struts fencing post including cutting top to shape,drilling holes notching for wire etc including all necessary drilling bolting andd similar work conforming to Fe-290 Gde E-165 all as specified and as directed.

M&L TMT bars 10 mm dia and over cut to length bend to shape required, including cranking, bending spirally for hoping for columns hooking ends and binding with MS steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

Dismantling fencing wire mesh, any type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standrad , rails, straining bolts, etc. including provision of binding wire.

Supply only chain link MS galvanised fencing, any size or type

S&F framed work such as grills, grating, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, barred iron doors, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screwscomplete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 or other cuting plates complete all as specified and directed.

Cleaning of SWT from bottom by dewatering by summersible pump and taking out solid sludge to be deposited at low lying area, white washing to complete internal walls and floor of tank complete all as specifed and directed .

M&L for application of two coat of Dr. Fixit Roof seal classic complete all as specified in manufacturer instructions complete all as specified and directed.

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) conforming to Fe-290 (Gde E-165) complete all as specified and directed.

M&L for one coat of synthetic enamel paint over a coat of red oxide primer on old steel surfaces of steel over 10cm in width or girth not otherwise described complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly untreated surfaces of steel n. exc 10cm in width or girth not otherwise described complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide primer on newly untreated surfaces of steel over 10cm in width or girth not otherwise described complete all as specified and directed.

Dismantling barbed wire of any thick ness

S&F in repair galvanized two stranded steel barbed wire 2.24 mm dia barbed with 2mm dia berb at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanized mild steel wire, staple or steel pins etc. complete all as specified and directed. Note : Each line wire to be measured.

Fixing only, galvanized two stranded steel barbed wire 2.24 mm dia barbed with 2mm dia berb at 75 mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanized mild steel wire, staple or steel pins etc. complete all as specified and directed.

M/s Capital Traders

Nripen Kalita

TRADE CENTRE

MS DAS CONSTRUCTION

M/s Dhruv Enterprises

M/s Harshita & Co

Ms N D Enterpise

M/s Rawat Enterprises