Open Gym at Kutiya Baba Bar...

Amount

NS Item -RMI 6 Leg and Thigh Exerciser/Air Walker Functions: The Leg and Thigh Exerciser provides excellent cardiovascular exercise while developing the leg muscles. Allows a full range of movement in the hip joint improving flexibility and strength, without any impact or stress to joints and back. Suitable for all ages. Approaches: Hold the crossbeam with both hands and swing your legs backwards and forwards in a walking motion. Size:- 992×505×1380 mm Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Paint: All Weather Double Layer Powder Coated Paint , Sealed Ball Bearing , Steel Footrest / Foot paddle for long lasting life

NS Item -RMI-8X Pull Chair Double Functions: Developing the strength of upper limbs, chest and muscle groups of shoulder and back, improving the flexibility and stability of shoulder joints and elbows. Good for healing the bending and stretching hindrances of shoulder joints and elbows, muscular atrophy, frozen shoulder, tennis elbows, etc. Approaches Sit down with your back against the equipment and take hold of the handgrips with both hands and push forward with effort till your arms extend straight. Revert slowly. Size:- 2187×902×1707 mm Material: Pre Galvanized Mild Steel , Material Thickness: 3 mm. Paint: All Weather Double Layer Powder Coated Paint Sealed Ball Bearing, Steel Seats for long lasting life

NS Item -RMI-10 Air Swing Functions: By swinging both legs together from side to side the Surfing Board strengthens and develops the lower abdomen hips and thighs, improves balance and co-ordination through “core” activation Approaches: Stand on the pedals and grasp the handles with both hands, swing from left to right. Size:-1177×942×1446 mm Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Paint: All Weather Double Layer Powder Coated Paint Sealed Ball Bearing, Steel Footrest / Foot paddle for long lasting life

NS Item -RMI-5X Dips And Leg Raiser/Knee-Hip Raise or Parallel Bars Functions: Develops the strength of upper limbs, shoulder and chest, strengthening cardiac and pneumonic functions. Approaches: Hold the crossbars tight with your hands and lift yourself up, then using the strength of your arms to do the pull-up action. Repeat according to yourp hysical conditions. Users: Suitable for middle-aged people and youths. Size 802x6l2x1487mm mMaterial: Pre Galvanized Mild Steel, Material Thickness

NS Item -RMI-17 Single Pole Setup Cycle Functions: Strengthening cardiac and pneumonic function remarkably by means of the coordinated movement of whole body, relieving fatigue of body. Approaches: Sit on the base plate, hold the handles with both hands and put your feet on the pedals, do the movement as riding. Size: - 933×550×1330mm Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Stainless Steel Nuts, High Quality Durable Steel Seats. Paint: All Weather Double Layer Powder Coated Paint

NS Item -RMI-21 Arm/Shoulder WheelFunctions: Building up the muscles of upper limbs, nhancing the flexibility and agility of shoulder joint. Approaches :-Hold the handgrips of rotating wheel with both hands and body should roll simultaneously clockwise or counter-clockwise following the wheel. Size:- 863×874×1882 Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Paint: All Weather Double Layer Powder Coated Paint. Sealed Ball Bearing, Steel Seats for long lasting life

NS Item -RMI-23 Hanging Wheel Functions: Developing the strength of upper limbs and the whole body balance.Size:- 2179×498×2060 Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Paint: All Weather Double Layer Powder Coated Paint. Sealed Ball Bearing, Steel Seats for long lasting life

NS Item -RMI 2 Elliptical Exerciser Functions: Develops the whole body joints, strengthening cardiac and pneumonic function, and shaping figure. Approaches: Putt your feet on the pedals, holding the handles with your both hands and moving your hands and feet alternately. Users: Suitable for people of different ages except children. Size:- 1140×706×1680mm Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Paint: All Weather Double Layer Powder Coated Paint Sealed Ball Bearing

NS Item -RMI 1 Body Shaper/The Horse Functions: The Body Shaper gives a full-body cardiovascular and toning work-out, pushing with the legs while pulling with the arms against resistance. Works arms shoulders, back legs, abdomen and legs with low impact exercise. Approaches: Sit on the seat, hold the handles with both hands and put both feet on the pedals. Push with legs and pull on the handles. When exercising, keep your body upright. Size:-979×572×1024 mm Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Paint: All Weather Double Layer Powder Coated Paint. Sealed Ball Bearing , Steel Seat and Footrest / Foot paddle for long lasting life

NS Item -RMI-14 Single Pole Rowing Machine Functions: The rowing action is known to be one of the best forms of exercise, working arms, shoulders, chest, back and abdomen. The Rower offers cardiovascular and toning benefit for all ages. Approaches: Put your feet on the pedals, hold the handles with both hands, pull the handles towards your body. Repeat simulated rowing actions size:- 400×1007×834mm Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Paint: All Weather Double Layer Powder Coated Paint , Sealed Ball Bearing , Steel Footrest / Foot paddle for long lasting life

NS Item -RMI- 13Stair Stepper With Glider Functions: Develops the muscles in legs and waist, strengthening the flexibility and agility of waist. Approaches Hold handles with hands, put your feet on the pedals one by one, and stand on the middle of the pedal: the arms go up and down with the moving handle to keep the waist swinging. Size:- 1036×736×1343mm Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Paint: All Weather Double Layer Powder Coated Paint Sealed Ball Bearing, Steel Footrest / Foot paddle for long lasting life

NS Item -RMI- 15 Tai Chi Wheel Functions: Increasing mobility of shoulder-elbow, hip-knee joint and strengthening cardiac and pneumonic function. Approaches :-Legs in sitting stance, hold to the handgrips of rotating wheels with both hands and press, turn the wheels in the same or opposite direction for 3-5 minutes. Size:- 1258×1029×1353 Material: Pre Galvanized Mild Steel, Material Thickness: 3 mm. Paint: All Weather Double Layer Powder Coated Paint. Sealed Ball Bearing, Steel Seats for long lasting life

Bidder Name

Amount

THE CHINDER CO OP LABOUR AND CONSTRUCTION SOCIETY LTD(GSTN-06AAHAT2696R1ZJ)

The bhuna jineh Mata coop. labour construction society ltd Bhuna distt fatehabad(GSTN-NA)

The bhuna jineh Mata coop. labour construction society ltd Bhuna distt fatehabad

The bhuna jineh Mata coop. labour construction society ltd Bhuna distt fatehabad