Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹23.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bid found in order | |
| 2 | L2₹27.2 L+₹4.2 L (18.1%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest bid | |
| 3 | L3₹29.0 L+₹6.0 L (26.0%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest bid |
Tender Value
Refer Docs
EMD Value
₹65,000
Closing Date
24 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 874 EWS C/O 56 APO
GE 874 EWS C/O 56 APO
SPECIAL REPAIR TO BLDG NO T-288 AND T-54 FOR KALSURI BN AT TANGDHAR AND PROVN OF PROVN OF RATAINING WALL FOR OR COOK HOUSE FOR INF BDE CAMP AT TANGDHAR GARRISON
2022_MES_541171_1
GE 874/EWS-30/2022-23
Open Tender
Civil Works
Item Rate
180 days
Kupwara
As per NIT and tender documents
6 documents required · 6 mandatory
₹500
GE 874 EWS
₹65,000
Yes
29 Sept 2022
27 Jul 2022
26 Aug 2022
27 Jul 2022
24 Aug 2022
10 Aug 2022
27 Jul 2022 - 3 Aug 2022
Amount
B/R and E/M Portion
Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc. 15 cm thickness below or above ground level), complete all as specified.
Dismantling of timber scantlings 40 sqcm and over in section in any position in unframed work.
M&L for second class soft wood as in scantling clean sawn fixed in position.
M&L for second class soft wood as in scantling clean sawn fixed in position but except wood.
Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work, complete all as specified and directed.
Walling of random rubble stone uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete, all as specified and directed.
Description all as per above but except stone all as specified and directed.
M&L Brick work with sub class 'B' brick straight or curved on plan etc 6m mean radious built in cement mortor 1:6.
Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc.
M&L for rendering 15mm thick on stone masonary surfaces or other than fair faces of brick work in cement mortar 1:4 finishing over and smooth without using extra cement.
M&L applying there coats of whitewashing including preparation of newly plastered surface of wall.
Dismantling of plain or corrugated steel sheeting any guage/thickness including Nainital or similar pattern roof covering, all as specified.
S&F for Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength pf 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws as specified.
S&F for Pre-Painted galvanume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as roof covering / cladding to wall fixed with self tapping screws as specified.
Taking down chowkhats or frame exc. 1.5sqm and n.exc. 4 sqm each with shutter (without taking off shutter from the frame).
Taking down chowkhats or frame n.exc. 1.5 sqm each with shutter (without taking off shutter from the frame).
M&L for second class soft wood plain, solid straight chowkats and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue pinned and joints.
M&L Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated.
S&F Glazed and Skelton shutters 30mm thick of sceond class soft wood, open rebated and prepared to receive glass, gauge etc (without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc fitted to chowkhat.
S & F Mild Steel butt hinges 100mm long medium weight.
S & F 200mm long aluminum alloy, anodized barrel tower bolt of extruded section.
S & F 250mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy.
S & F aluminum handles, cast type, anodized 150mm long.
M & L sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane, 3mm thick.
S&F MS butt hinges 75mm long medium weight.
S&F 125 mm long aluminium alloy, anodised barrel tower bolt of extruded section.
S&F Aluminium handle, cast type, anodised 100 mm long.
Dismantling wall/ceiling board of any discription including cover fillets.
M & L plain fillet square, rectangular in section exc. 3 & n exc. 6 sqcm.of second class softwood.
M&L 6mm thick veneered decorative plywood grade 1 (with BWR resin) (06 Nos of Ply) with decorative face veneers on one face, fixed with nails to timber frame work as in ceilling type BB fixed with nails to timber frame work.
M&L 6mm thick veneered decorative plywood grade 1 (with BWR resin) (06 Nos of Ply) with decorative face veneers on one face, fixed with nails to timber frame work as in walling, complete all as specified and directed.
Dismantling boarding of any description fitted in any position with nails, complete all as specified and directed.
20mm thick second class soft wood boarding, planed one side, with butt joints and fixed with nails in facia, eaves boarding, complete, all as specified and directed.
75mm thick PCC 1:3:6 type C-2 (using 20mm graded crushed stone aggregate) as in plinth protection, finished the surfaces even and fair, complete all as specified and as directed.
M&L Plain cement concrete 1:4:8 type D2(using 40 mm graded aggregate) 75 mm thick as in sub Base.
M&L for Chequered cement concrete tiles 20 cm X 20 cm X 25 mm thick set jointed and pointed in neat cement slurry in floor with grey cement and no pigments with cement mortar 1:4, 15 mm thick screed bed.
M&L non skid coloured Ceramic tiles 7 to 8 mm thick area of each tiles exceeding .18 Sqm but not exceeding .38 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to mach over 25mm thick PCC 1:2:4 type B0(using 12.5mm graded agg)and 15mm thick screed bed in CM 1:4.
Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish of the premises, complete all as directed by the Engineer-in-charge.
Glazed ceramic coloured tiles (300x200mm) x 7mm thick, as in vertical surfaces such as in skirting and dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 10mm thick back coat layer in cement mortar 1:4, complete all as specified and directed by Engr-In-Charge.
10 Ltr capacity PVC valveless symphonic action type flushing cistern low level white with inlet ball valve, float and handle/push including brackets and PVC flushing pipe 32mm bore, fixed in repairs, all as specified.
Bib tap cast copper alloy chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15mm bore (ISI marked) fixed in repairs.
Stop valve 15mm bore, cast copper alloy screwed down, high kpressure, with crutch jor butter fly handlel, screwed bosth ends for iron pipe or for unioons and fixed in repairs.
PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed in repairs.
S&F 500 Ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of old water tank of any discription fixed in repair.
S&F Vitreous china Wash hand basin, white, flat back of size 550x400mm including brackets, brass chromium plated waste coupling, and waste pipe PVC 32mm dia including cutting for and pinning in ends of brackets or erecting stand etc, fixed in repairs, complete all as specified.
S&F in repair 32mm bore dia waste coupling of PTMT ( half of full threaded) (weight 32mm-45gms/40mm -60 gms) for 32mm bore dia of discharge pipe fixed in repair to WHB, Sink, complete all as specified and directed by Engineer in charge.
Pillar taps 15 mm bore fancy type cast copper alloy, with capstan heads chromium plated screwed down high pressure, with or without lettered 'Hot' or 'Cold' with ,long screwed shanks and fly-nuts screwed for iron pipe and fixed complete all as specified and directed.
Taking up or down steel tubing of 15mm dia bore and connection laid in trenches or floor and fixed to walls etc including cleaning for refixing or removal to store complete with all fittings, valve etc.
GI steel water tube medium grade galvanised with all fittings like socket, union, elbow, bends Tee etc and fixed complete to walls and ceiling or laid on floor bore of 15mm.
Refixing old steel water tubing of 15mm bore and connections in new or old position (Walls, ceilings floors etc.) including fittings as required, complete all as specified and directed.
S&F 15 mm Gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed.
M&L French polishing on surfaces of any descripton width or girth including cleaning and preparing the surface including a coat of wood filler on new works two or more coats.
M&L for 3 Coats of colour wash on old & newly plaster surface including preparation of surfaces.
S&F Sheet glass ordinary quality 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, in repairs, complete all as specified and as directed.
Plain cement concrete 1:2:4 type B-1 using (20mm graded crushed stone aggregate) as in copings, plinth band, bed blocks and like slightly rounded or chamfered angles as directed including necessary form work, all as specified.
Second class soft wood weather boarding, clean sawn, plain 20mm thick or feather edged 15mm to 20mm thick and fixed with 30mm laps, all as specified.
Two coats of synthetic enamel paint including cleaning dusting of new or previously untreated wood of ply wood base surfaces for wall, door,window,ventilator and ceiling not otherwise described over 10cm width or girth complete all as specified and as directed by Engr-in-Charge.
Excavation over area n.exc 1.5m deep & getting out in soft loose soil.
M & L PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete.
M & L for Walling of random rubble, brought upto courses well bonded, bedded and solidly hearted built in cement mortar 1:4.
Extra over stone walling for hammer dressing to face stone and dressing of face beds and joints.
S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
M&L precast cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in boulders or bond stone (for stone walling ) and set in cement mortar 1:4.
M&L hand packing of stone boulders (any thickness) at back of wall etc and raising or lowering to required level.
Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm with any type of soil.
M&L flush pointing to random rubble stone masonry in cement mortar 1:4, uncoursed or brought upto courses.
Forming embankments including raising (or lowering) earth , spreading in layers n exc 30 cm thick, watering ramming /rolling and finishing to required size, shape etc n.exc 1.50 m high above base.
Forming embankments including raising (or lowering) earth , spreading in layers n exc 30 cm thick , watering ramming /rolling and finishing to required size, shape etc exc 1.50 m but n.exc 3.00 m high from base.
Forming embankments including raising (or lowering) earth, spreading in layers n.exc 30 cm thick , watering ramming /rolling and finishing to required size, shape etc exc 3.00 m but n.exc 4.50 m high from base.
Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) asd making good distribued surface of wall , floor etc complete all as specified and directed.
Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for 3 pin 5A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for 3 pin 5A socket outlet on the same board controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
Point wiring for one 3 pin 15 Amps socket outlet/sheet metal enclosure independent with 4.00 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 2.5 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab
M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.
Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor
Supply & fixing Switch socket combination 5 in 1, 5 and 15 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor
Supply & Fixing Socket outlet 2 in1, 3 pin 5 Amps flush type complete all as specified and directed.Make : Havells/Anchor
Supply & Fixing ceiling rose surface backelite 65x50mm two to three terminal (ISI marked).Make : Havells/Anchor
Supply and fixing lamp holder bracket type, PVC/polycarbonate type with skirt cap suitable for batten fittings, complete all as specified and direted.Make : Havells/Anchor
Supply and fix LED Bulb 9 Watt. Make Havells/Bajaj.
S&F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.
Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 8 way with IP-43 IK-09 protection single door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .
Supply & Fixing RCBO, single pole and neutral (SPN) 30mA, 240V , 32 Amp all as specified and directed. Make- Havelles/MDS/Legrand.
Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.
S&F 1100 volt grade heavy duty cable PVC insulated multistranded aluminum stranded conductor served with PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than 1 mtr apart including 4mm dia GI suspension wire one twin core cable flat of circular of size 10 Sqmm complete all as specified and as directed by Engr-in-Charge. Make : Havells/Anchor/Polycab/Plaza.
Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3cm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test all as specified or indicated including testing on completion.
Storage water heater (Geyser), vertical type, of 25 ltr capacity of inner tank, outer tank, syphon assembly, thermostat heating element, safety valve etc complete all as per manufacturer design and specifications including making of all fixing arrangements complete having BEE Five Star Rating including grouting of nuts and bolts and necessary PCC work as specified and directed by Engineer-in-Charge. Make : Havells model Monza DX HSN code 8516 or equivalent as approved by Engr-in-charge.
patriotic builders
M/S BEE AAY CONSTRUCTIONS
Bidder Name
patriotic builders
G N T CONSTRUCTION CO
M/S BEE AAY CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .