Construction of Anganwadi building at Salaipudur H/o J Krishnapuram Panchayat in Sulthanpet Block in Coimbatore District under MLACDS2021-22, Package No 2/MLACD/2021-22

Amount

Name of the Work :Construction of Anganwadi building at Salaipudur H/o J Krishnapuram Panchayat in Sulthanpet Block in Coimbatore District under MLACDS2021-22

Earth work excavation for foundation in all soils and sub-soils such as hard stiff clay, stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders, hard gravelly soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and bailing out water wherever necessary complete complying with standard specifications and as directed .

Cement concrete 1:4:8 (One of cement,four of sand and eight of hard broken stone) using 40mm size hard broken stone inclusive of shoring, strutting, bailing out water, ramming, curing etc., complete in all respects as directed by the departmental officers.

Brick work in cement mortar 1:5 (One of cement and five of sand) using country bricks of size 8-¾"×4-¼"×2-¾" in Basement and in Ground floor including fixing the frames of doors and windows, scaffolding, proper setting, curing, etc., complete in all respects.

Supplying and erecting centering for sides and soffits including supports for all reinforced cement concrete works like lintels, beams, etc., including strutting 3M high using Mild steel sheets of size 90cm × 60cm and B.G. 10, stiffened with Mild steel Angles of size 25mm × 25mm × 3mm laid over Silver oak (cw) joists of size 10cm × 6.5cm (Spaced about 91cm c/c) and supported by casurina props of 10cm to 13cm dia (Spaced at 75cm c/c) as noted below including removing the same after specified period without damaging RCC works in all floors etc., complete as directed by the departmental officers complying with relevant standard specifications bwlow GL

Supplying and erecting centering for sides and soffits including supports for all reinforced cement concrete works like lintels, beams, etc., including strutting 3M high using Mild steel sheets of size 90cm × 60cm and B.G. 10, stiffened with Mild steel Angles of size 25mm × 25mm × 3mm laid over Silver oak (cw) joists of size 10cm × 6.5cm (Spaced about 91cm c/c) and supported by casurina props of 10cm to 13cm dia (Spaced at 75cm c/c) as noted below including removing the same after specified period without damaging RCC works in all floors etc., complete as directed by the departmental officers complying with relevant standard specifications Above GL

Fabricating and placing the steel grills for reinforcement for all reinforced cement concrete works such as plinth beam, lintels, beams, sunshade, roof and floor slabs etc., including cost of steel and fabricating the reinforcement grills in position etc., complete in all floors (The rate to include the cost of binding wire steel also)

Reinforced Cement concrete 1:1.5:3 (One of cement, one and a half of sand and three of hard broken granite stones) using 20mm gauge hard broken granite stones for all reinforced cement concrete works viz. Raft slabs, raft beams, column footing, plinth beam, lintel, square or circular columns, T, L, or rectangular beam , floor, roof or waist slab, drop cum parapet wall, loft, sun shade and other similar works excluding the cost and fabrication of reinforcement grills in position, shuttering, centering but including laying, vibrating, curing, finishing and providing Mild steel fan hooks in the RCC slab wherever necessary as directed by the departmental officers etc., complete in all respects.

Special RCC surface plastering with cement mortar 1:3 (One of cement and three of sand) 10mm thick including finishing smooth, proper setting, curing etc., complete as directed by the departmental officer

Plastering the walls with cement mortar 1:5 (One of cement and five of sand) 12mm thick including finishing smooth, scaffolding, setting, curing etc., complete as directed by the departmental officers.

Plastering with cement mortar 1:3 (One of cement and three of sand) 12mm thick including finishing smooth, proper setting, curing etc., complete as directed by the departmental officer

Providing granolithic pattern flooring 25mm thick in cement concrete 1:2:4 (One of cement, two of sand and four of hard broken granite chips) using hard broken granite stone jelly of size 10mm to 12mm and surface rendered smooth including supplying and fixing of 20mm Ø GI pipe as outlet, curing, finishing, etc., complete in all respects

Supply and fixing of European water closet with PVC Pipe including all Charges etc.,

Supply and fixing of water closet with PVC Pipe including all Charges etc.,

Supplying of 110mm PVC Pipe and Special as directed by the departmental officers

Paving the floor with Vetrified tiles (colour and shade as directed) of size 305 mm x 305 mmx6mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement and as directed by the departmental officers etc., complete in all respects.

Paving the floor with Antiskid tiles of size 305x305x6mm laid in CM 1:2, 10mm thick and pointing with white cement 0.40kg per sqm mixed with colouring pigment to suit the colour of the tiles including cost and conveyance of all materials to site and all labour charges in all etc.,

Dadooing walls with Glazed tiles of sizes 150mm X150mm X 6mm size of approved make and quality and colour lSet in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed.

Providing weathering course with best quality of brick Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thicknes

Finishing the top of roof slab with one course of machine pressed tiles of size 20cm × 20cm × 2cm (Madras) with cement mortar 1:3 (One of cement and three of sand) mixed with water proofing compound and pointed with the same oiled mortar, curing etc., complete in all respects

Supplying and fixing in position cuddappah slabs of 50 mm thick including labour charges for conveyance and finishing etc., complete in all respects as directed by the departmental officers

Distempering two coats using best Oil Distemper including cost of Oil Distemper scaffolding charges etc., complete with standard specifications and as directed by the departmental officers

Painting the walls and ceiling two coats with approved emulsion paint including cost and conveyance of all materials to site, preparing the surface, curing etc., complete in all respects

Painting with enamel paint two coats over Mild steel doors and windows including cost and conveyance of all materials to site, preparing the surface, curing etc., complete in all respects

Towards the cost and supply of Mild steel doors of following sizes including all charges

Mild Steel Door of size 0.75M×2.1M

Mild Steel Door of size 1M×2.1M

Mild Steel Door of size 1.1M×2.1M

Window 1.2M×1.30M

Ventilators 0.90M×0.450M

RCC Jolly

Labour charges for fixing doors and windows as directed by the departmental officers

Windows and Ventilators

Supply and fixing of TNEB meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit. SD 125

Supply and fixing of 32 Amps DP Switch with metal clad of 500 V with fuse and neutral (Side Handle) on suitable TW Box PWD Earthing in all etc SD 144

Supply and run of 2 of 4sq.mm (84/0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in GI pipe (class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains - SD 65

Supply and run of 2 of 4 sq.mm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains SD 70

Wiring with 2 x 1.5sq.mm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T switch with painting of suitable colour for open PVC light point/ fan point (For electronic Regulator) (SD 17)

Wiring with 2x 1.5sqmm (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mmx 100mm x 75mm MS switch box for 5A 3 pin non interlocking flush type CS plug wfth painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point SD 36

Supply and fixing of single box type 4'40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube(SD 89)

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for11W CFL lamp with CFL. SD 83

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

M/S THANGARAJ & CO